Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Charge-transfer salts between BDNT and M(mnt)2 (M=Ni, Pd, Pt, and Au) have been prepared by mixing BDNT–(SbCl6)2 and (TBA)2 –[M(mnt)2 ] and by electrochemical oxidation of BDNT in TBA–[M(mnt)2 ] solution. Almost all powdery samples of (1:1) salts show high electrical conductivity. The valence of M(mnt)2 was determined…
A comparative study of Cu/Al 2 O 3 (CuA) and Cu/CeO 2 /Al 2 O 3 (CuCA) catalysts, examining the redox processes induced by thermal treatments in CO on preoxidized samples, has been performed by means of temperature-programmed techniques (TPR, TPO, and TPD) and FTIR and EPR spectroscopies. The results evidence differen…
Two kinds of twinning morphologies of ZnO crystallites prepared under hydrothermal conditions were obtained. The twin relations of the crystallites could be influenced by additives. The twinned crystallites in the pure H2O or weak basic solutions (1 N KOH) are bipyramidal and take (0001-) as the twin and composition p…
A summary of selected thermophysical properties of refractory metallic carbides is reported with a critical evaluation of the data. A target of this work was to collect a wide and selected set of data spanning from physical and physico-chemical parameters to more specialistic physico-mechanical items of informations,…
An inclusion compound [Fe(dpp)2(NCS)2]·py has been prepared and characterized by magnetic and Mössbauer spectral measurements (dpp = dipyrido[3,2-a∶2′3′-c]phenazine and py = pyridine); it shows a spin-crossover behavior with a large hysteresis (ΔTc = 40 K).
Spectrophotometric absorption and fluorescence measurements of spiropyrans 2 and 3 modified with chelating functionalities, in the presence of Ca2+ and Zn2+, provide evidence of a thermally stable spiropyran–merocyanine photoswitch that is modulated by the metal cations.
Sorption of CO 2 in poly(methyl methacrylate) at 35−200 °C and concurrent dilation of the polymer at 35−85 °C over a pressure range up to 50 atm were studied. Dissolution and Flory−Huggins interaction parameters for the gas in the polymer, not only in the rubbery state but also in the glassy state, were estimated by a…
Three viable technologies for storing hydrogen fuel on cars are currently available: compressed gas, metal hydride adsorption, and cryogenic liquid. However, each of these has significant disadvantages: volume, weight, boiling losses, or energy to compress or liquefy the hydrogen. Two alternative approaches are analyz…
In this paper, Brunomer–Emmett–Teller (BET) surface area, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and temperature programmed reduction (TPR) are used to investigate the interactions between CuO and the TiO2 (anatase) support, in samples prepared by impregnating the TiO2 support with an aqueous…
Chitosan has potential biomedical applications that may require the final products to be sterilized before use. The gamma irradiation of purified and highly deacetylated chitosan fibers and films at sterilizing doses (up to 25 kGy) caused main chain scissions. The viscosity average molecular weight of the polymer decr…
We investigate the relationship between the fabric drape coefficient from the Cusick drapemeter and mechanical properties tested on the Kawabata Evaluation System for Fabrics (KES-F) for woven fabrics. This is the first attempt at determining a compre hensive relationship between the fabric drape coefficient and mecha…
The hydrothermal reaction of MoO3, CuSO4·5H2O, 1,2,4-triazole and H2O produces a 50% yield of [{Cu2-(triazolate)2(H2O)2}Mo4O13], a material constructed from {Mo4O13}n2n– chains entrained within the three dimensional framework provided by the {Cu2(triazolate)2(H2O)2}n2n+ polymeric complex.
A careful analysis of ac electrical measurements of the Na2O·3SiO2 glass in the temperature range from 2 to 435 K and frequency range 10 to 105 Hz enables the clear separation of different regimes of behaviour. At the centre of this study is the power-law behaviour called `universal dynamic response' (UDR). It is part…
Novel flower-like nanostructures consisting of silicon oxide nanofibers, radially attached to a single catalytic particle, were generated by solid-solid and gas-solid reactions under a temperature gradient. In this process, a mixture of SiC and Co powders, deposited on silica substrates and heated under an Ar/CO atmos…
A series of iron-containing mesoporous silicas (Fe-HMS) with Fe contents up to 5.7 wt.% have been prepared at room temperature using the neutral hexadecylamine as surfactant molecule. Characterization of these materials by a variety of spectroscopic techniques, including EXAFS, EPR, Mössbauer and UV–Vis spectroscopies…
Vanadium pentoxide/polypyrrole aerogel (ARG) composites have been synthesized by sol–gel routes, and investigated as cathode materials in Li batteries. The primary method utilized simultaneous polymerisation of pyrrole and vanadium alkoxide precursors. Hydrolysis of VO(OC3H7)3 using pyrrole–water–acetone mixtures yiel…
Plasma co-polymers (PCPs) of acrylic acid/octa-1,7-diene and allyl amine/octa-1,7-diene have been prepared and characterised using X-ray photoelectron spectroscopy (XPS). The use of a hydrocarbon diluent in the monomer feed allowed the deposition of films with controlled concentrations of carboxylic acid and nitrogen-…
Many lead artifacts are danzaged after being kept for a short period in enclosures that contain materials which emit carboxylic acids. The formation of corrosion products and the corrosion sensitivity of lead were studied under experimental conditions in which the duration of exposure, the acetic acid (ethanoic acid)…
A new empirical interatomic potential of the embedded atom type is developed for the Fe-Cu system. The potential for the alloy system was constructed to reproduce known physical parameters of the alloy, such as the heat of solution of Cu in Fe and the binding energy of a vacancy and a Cu atom in the matrix. The potent…
Sonochemistry, or the application of power ultrasound to chemical processes, is a technology that has undergone very intensive research and development in the last 15−20 years, with respect to both its range of application and the methods employed for its implementation at industrial manufacturing scales. In a series…