Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
A three-dimensional treatment method involving implantation of ions into solids immersed in a high voltage pulse discharge ignited on the left-hand-branch of the Paschen curve was elaborated about fifteen years ago. This method, named 3DII for short, has been used in the equipment JUPITER (Joint Universal Plasma and I…
The present study describes the effect of thermal rectification on physical and mechanical properties of Eucalyptus grandis wood at different levels of temperature and time. Samples of Eucalyptus grandis wood (10 × 10 × 200 mm) were heat-treated at 180, 200, 220 and 240 °C during 4 and 8 hours. The mechanical properti…
Dynamical Elastic Moduli of the Ti-13Nb-13Zr biomaterial alloy were obtained using the mechanical spectroscopy technique. The sample with heat treatment at 1170K for 30 minutes and water quenched with subsequent aging treatment at 670 K for 3 hours (TNZ + WQ + 670 K/3 h), was characterized through decay of free oscill…
Duplex stainless steels are high strength and corrosion resistant steels extensively used in the petrochemical and chemical industries. The aging at 475 ºC for long periods of time provokes embrittlement and deterioration of corrosion resistance. However, short duration aging at 475 ºC may be used as heat treatment to…
A hard composite coating was fabricated by laser alloying of the Co-Fe-Al+B4C-Si3N4 mixed powders on TA15 (Ti-6Al-2Zr-1Mo-1V) titanium alloy in an open system. The composite coating mainly consisted of γ-Co, TiB2, TiB, TiC0.3N0.7, SiC, Ti3Al, FeAl, and Co-Ti intermetallics. The TEM diffraction pattern results indicate…
A specific fiber-reinforced elastomer (FRE) composite was formed by inserting curved fibers into a rubber matrix. This material combined the hyperelastic behavior of a soft elastomer matrix with the high stiffness character of a fibrous reinforcement. A biphasic loading property could be realized physically. Based on…
Zn-ferrite nanoparticles were synthesized at room temperature by mechanical alloying the stoichiometric (1:1 mol%) mixture of ZnO and α-Fe2O3 powder under open air. Formation of both normal and inverse spinel ferrite phases was noticed after 30 minutes and 2.5 hours ball milling respectively and the content of inverse…
A mechanical spectroscopy study of Cu-Zr-Al bulk metallic glasses, was performed with two types of equipment: a Kê-type inverted torsion pendulum and an acoustic elastometer, working in the frequency ranges of Hz and kHz, respectively, with a heating rate of 1 K/min. The analysis of the anelastic relaxation shows simi…
Doped lanthanum chromite-based ceramics are the most widely used interconnector material in solid fuel cells (SOFC) since they exhibit significant electrical and thermal conductivity, substantial corrosion resistance and adequate mechanical strength at ambient and high temperatures. The disadvantage of this material i…
The effects of copper tailings as an additive, on some durability properties of cement mixtures were investigated. In each mixture, copper tailings addition levels by mass were 0%, 5% and 10%. Compared to the control samples, copper tailings blended pastes showed superior performance against autoclave expansion while…
Hole cold expansion (HCE) is an effective method to extend the fatigue life of mechanical structures. During cold expansion process compressive residual stresses around the expanded hole are generated. The enhancement of fatigue life and the crack initiation and growth behavior of a holed specimen were investigated by…
Poly (ε-caprolactone) (PCL) based hybrids containing different amounts of modified (Aerosil® R972) and unmodified (Aerosil® A200) silica oxide were prepared employing the solution method, using chloroform. The relationships of the amount of nanofillers, organic coating, molecular structure and intermolecular interacti…
This paper reports the preparation of the amine/epoxy blends with various amines such as 4,4′-diaminodiphenylsulfone (DDS), one nitrile side chain-containing diamine (BDB), and phthalonitrile-containing amine (APN). Differential scanning calorimetry (DSC), rheological analysis, and thermal gravimetric analysis (TGA) w…
This article presents the design of a newly developed 2DoF robotic arm with a novel statically balanced and bi-stable compliant grasper as the end effector for laparoscopic surgery application. The arm is based on internal motors actuating 2 rotational DoFs: pitch and roll. The positive stiffness of the monolithic gra…
This article mainly aims at experiments to modify the matrix phase in glass fiber-reinforced plastics anchor (GFRP-anchor), trying to achieve the enhancement in the torsional performance of GFRP-anchor in order to expand its application field. The experiments were to add the mineral filling nano mullite powder and the…
In this study, A356-SiCp metal-matrix composites were produced through thixomoulding process, and these composites were subjected to wear tests. The composites containing various volume fractions of SiCp particles (5%, 10%, 15% and 20%) as the reinforcement were produced at two different temperatures of 590°C and 600°…
This study deals with stress analysis of functionally graded discs subjected to internal pressure and various temperature distributions, such as uniform T, linearly increasing To, and decreasing Ti temperatures in radial directions. For analytical study, the closed-form solutions for stresses and displacements are obt…
Simulations are performed to investigate the flow of a shear-thinning, non-Newtonian fluid in a collapsed elastic tube and comparisons are made with experimental data. The fluid is modeled by means of the Bird- Carreau viscosity law. The computational domain of the deformed tube is constructed from data obtained via c…
Recently, a new ternary phase was discovered in the Ti-Si-B system, located near the Ti6Si2B composition. The present study concerns the preparation of titanium alloys that contain such phase mixed with α-titanium and other intermetallic phases. High-purity powders were initially processed in a planetary ball-mill und…
In the integrated steel industries the sintering process plays an important role furnishing raw material to the blast furnace. In this work, a computational simulation of the sinter process is developed that is able to predict the most important phenomena within the sintering bed. The model is based on the multi phase…