Materials Literature

文献浏览

按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。

清除
第 240219 / 265745 页 · 当前展示 4,804,361–4,804,380 / 5,314,891 条匹配结果 · 摘要仅作预览

In Vitro Degradation Behavior of Ternary Mg-Zn-Se and Mg-Zn-Cu Alloys as Biomaterials.

Dharam Persaud-Sharma、Noah Budiansky2013-01-01PubMed

In this study, the corrosion behavior of Mg-Zn-Se and Mg-Zn-Cu alloys was investigated to evaluate their corrosion behavior related to use as implantable biomaterials. The corrosion behavior of these alloys and a commercially available Mg-Zn alloy were examined using static solution electrochemical testing, dynamic so…

Magnesium Alloys: Properties and ApplicationsHydrogen Storage and Materials

Characterization of Phosphoric Acid Doped N-type Silicon Thin Films Printed on ITO Coated PET Substrate

M.K.M. Ali、K. Ibrahim、E.M. Mkawi 等 4 位作者2013-01-01International Journal of Electrochemical Science

In this paper n-type polycrystalline silicon thin films deposited on ITO coated polyethylene terephthalate (PET) substrate by screen printing technique have been studied. The phosphoric acid with different concentration used as doping source to create n-type silicon powder which is dissolved in solvent to obtain n- ty…

Thin-Film Transistor TechnologiesSilicon Nanostructures and PhotoluminescenceNanowire Synthesis and Applications

Flame Retardant Polymeric Materials

Hitoshi Nishizawa2013-01-01NIPPON GOMU KYOKAISHI

The studies on the combustion and flame retardant mechanisms are most important for the developments of the flame retardant materials. In this paper, the author would like to introduce the basics and the recent trends of studies in flame retardant mechanisms to develop the flame retardant polymeric materials.

Polymer Nanocomposites and PropertiesFlame retardant materials and propertiesMaterial Properties and Applications

EFFECT OF HEAT TREATMENT ON THE WEAR AND CORROSION BEHAVIORS OF A GRAY CAST IRON COATED WITH A COLMONOY 88 ALLOY DEPOSITED BY HIGH VELOCITY OXYGEN FUEL (HVOF) THERMAL SPRAY

Ali Öz、R. Samur、Harun Mindivan 等 6 位作者2013-01-01Hrčak Portal of scientific journals of Croatia (University Computing Centre)

The present work has been conducted in order to determine the influence of heat treatment on the wear and corrosion behaviours of a gray cast iron substrate coated with a Ni base coating deposited by HVOF thermal spray. The wear resistance of the coatings was obtained using a reciprocating wear tester by rubbing a 10…

Metal and Thin Film MechanicsHigh-Temperature Coating BehaviorsMetal Alloys Wear and Properties

Dissipative particle dynamics simulation of macromolecular solutions under Poiseuille flow in microchannels

Shaofeng Xu、Jiugen Wang2013-01-01Acta Physica Sinica

macromolecular solutions under Poiseuille flow in microchannels are investigated using the dissipative particle dynamics (DPD) approach. The results show that the macromolecular solutions are non-Newtonian fluids which can be described by power-law fluids, and the power-law index decreases with the increase of the mac…

Microfluidic and Capillary Electrophoresis ApplicationsBlock Copolymer Self-AssemblyNanopore and Nanochannel Transport Studies

Analysis of characteristics and key influencing factors in magnetomechanical behavior for cable stress monitoring

Peng Zhang、Lin Liu、Weimin Chen2013-01-01Acta Physica Sinica

Until recently the magnetomechanical behavior has been rather poorly understood with contradictory results and interpretations from different investigators in the study of stress monitoring by magnetic method. Based on the domain motion and field-induced magnetization process of magnetic material, the stress-induced m…

Structural Health Monitoring TechniquesMagnetic Properties and ApplicationsNon-Destructive Testing Techniques

Physic-Chemical Characterization of „NGWO‟ White Clay for Industrial Use

Nwosu D.C2013-01-01OpenAlex

Ngwo White clay from Udi in Enugu State of Nigeria was analyzed mineralogically and physic–chemically. The results of the chemical analysis are as follows: SiO2:53.2%, Al203:5.906%, K2O:0.121%, Na2O:1.4175%, Fe2O3:0.444%, CaO: 0.0061%, PdO: 0.0049%. The results of the physical analysis are as follows: 8%moisture, 1%As…

Clay minerals and soil interactionsGeochemistry and Geologic MappingNMR spectroscopy and applications

Morphology of the Ural type diamonds

В. И. Ракин2013-01-01OpenAlex

A method for analyzing the surface of rounded mineral crystals has been developed. The morphology of Ural-Brazilian type diamonds from different deposits of Yakutia, Urals and Brazil has been studied. Signs of curvilinear forms of diamond dissolution, including forms of reversible dissolution and irreversible etching,…

Diamond and Carbon-based Materials ResearchTunneling and Rock MechanicsGeological Studies and Exploration

Shear thickening fluids based on nanosized silica suspensions for advanced body armour

Ł. Wierzbicki、Anna Danelska、Karolina Olszewska 等 8 位作者2013-01-01OpenAlex

Composite structures built of paraaramid fabric and shear thickening fluid (STF) are developed in the light of their po� tential application in smart body armour. The study reports on the rheological behaviour of nanosized silica suspensions. Depending on the oligomer chemical structure and molecular weight, we observ…

Mechanical Behavior of CompositesNatural Fiber Reinforced CompositesTextile materials and evaluations

Thermally induced damage in hexanitrohexaazaisowurtzitane

Bo Chen、Guangai Sun、Lei Xie 等 10 位作者2013-01-01Central European Journal of Energetic Materials

The evolution of the microstructure of hexanitrohexaazaisowurtzitane (CL-20) after a thermal stimulus plays a key role in the performance of CL-20. In the current work, microstructural variations of CL-20 caused by thermal treatment were investigated by X-ray diffraction, in situ variable-temperature optical microscop…

Energetic Materials and CombustionThermal and Kinetic AnalysisSilicone and Siloxane Chemistry

RADIATION-INDUCED DECOMPOSITION AND POLYMERIZATION OF POLYVINYL ALCOHOL IN AQUEOUS SOLUTIONS

Lujun Chen、Weihua Sun、Jinping Tian 等 5 位作者2013-01-01Environmental Engineering and Management Journal

Polyvinyl alcohol (PVA) is a typical refractory organic pollutant with low biodegradability and high molecular weight.This paper presents data on the radiolysis of PVA in aqueous solutions by using ionizing radiation.Response surface methodology with Box-Benhken design of experiment was applied to analyze the interact…

Thermal and Kinetic AnalysisChemical Thermodynamics and Molecular StructureAdsorption, diffusion, and thermodynamic properties of materials

Synthesis and characterization of Ni(II) and Cu(II) complexes derived from novel phenolic Mannich bases

Nurgün Büyükkıdan、Salih Özer2013-01-01TURKISH JOURNAL OF CHEMISTRY

The novel phenolic Mannich bases 2,2'-(2-hydroxy-4,5- dimethylbenzylazanediyl)diethanol (1) and 2-((2-(4-(2-hydroxy-4,5- dimethylbenzyl)piperazin-1-yl)ethylamino)methyl)-4,5-dimethylphenol (2) have been synthesized in good yield by using a microwave-induced technique from 3,4-dimethylphenol and corresponding amines in…

Metal complexes synthesis and propertiesInorganic and Organometallic ChemistryThermal and Kinetic Analysis

Numerical study of the three-dimensional behaviour of plasticity induced crack closure phenomenon in bi-dimensional specimens

Daniel Camas Peña2013-01-01Dialnet (Universidad de la Rioja)

La caracterizacion de la propagacion de grietas se basa en la teoria clasica de la mecanica de la fractura elastica lineal, la cual ignora cualquier efecto tridimensional en la propagacion de la grieta. Factores tales como el espesor de la probeta y la curvatura del frente de la grieta no son considerados. El fenomeno…

Fatigue and fracture mechanicsMetal Forming Simulation TechniquesHigh-Velocity Impact and Material Behavior

Influence Of Impeller Suction Specific Speed On Vibration Performance

Simon Bradshaw2013-01-01OakTrust (Texas A&M University Libraries)

David Cowan is a Hydraulics Engineer with ITT Goulds Pumps responsible for applied research and hydraulic design of engineered API process pumps.His responsibilities include the development and analysis of new and existing hydraulic products through traditional and computational methods.He is also jointly responsible…

Textile materials and evaluationsSoil Mechanics and Vehicle DynamicsMechanical Engineering and Vibrations Research

Properties of Oriented Strand Board Prepared from Steam Treated Bamboo Strands under Various Adhesive Combinations

Adrin Adrin、Fauzi Febrianto、Sucahyo Sadiyo2013-01-01Jurnal Ilmu dan Teknologi Kayu Tropis

The objectives of this research were to analyze the physical and mechanical properties of Oriented Strand Board (OSB) prepared from steam treated betung bamboo (Dendrocalamus asper) strands under various adhesive combinations. The strands were steamed at 126 °C for 1 h with the pressure of 1.4 kg cm-2 prior to be blen…

Wood Treatment and PropertiesNatural Fiber Reinforced CompositesBamboo properties and applications

Effect of Tempering Behavior on Heat TreatedMedium Carbon (C 35 Mn 75) Steel

Vinod K. Murugan、P. Koshy Mathews2013-01-01International Journal of Innovative Research in Science Engineering and Technology

Investigations were carried out to study the effects of heat treatment on the mechanical properties of medium carbon steel. Samples of medium carbon steel were examined after heating at 9000C and soaked for 60 minutes in a muffle furnace and quenched in oil. The mechanical behavior of the samples was investigated usin…

Metal and Thin Film MechanicsMaterial Selection and PropertiesMetallurgical and Alloy Processes

Influence of Fe Oxidation on Selective Oxidation Behavior of Si and Mn Added in High Strength Sheet Steel

Yusuke Fushiwaki、Yasunobu Nagataki、Hideki Nagano 等 5 位作者2013-01-01鐵と鋼 : 日本鐡鋼協會々誌

In the process of hot dip galvanizing of Si and Mn added high tensile strength sheet steels, the selective surface oxidation of Si and Mn causes coating defects. One of the promising methods overcoming this problem is oxidation-reduction process. The steel surface exposed to an oxidizing atmosphere will react primaril…

Corrosion Behavior and InhibitionMicrostructure and Mechanical Properties of SteelsHydrogen embrittlement and corrosion behaviors in metals

Development of pure component property models for chemical product-process design and analysis

Amol Hukkerikar2013-01-01OpenAlex

Property prediction models based on the group-contribution+ (GC+) approach have been developed to provide reliable predictions of pure component properties together with uncertainties of predicted property values which is much needed information in performing chemical product and process design and analysis of sustain…

Process Optimization and IntegrationCrystallization and Solubility StudiesChemical Thermodynamics and Molecular Structure

Thermo-Physiological Comfort Properties of P/B Blended Suiting Fabrics

K Indramani、Prof.Kedar Nath Das、S S Mahish2013-01-01International Journal of Innovative Research in Science Engineering and Technology

In this work ,The thermal comfort properties of polyester and bamboo blended woven fabrics have been studied in relation to %of component fibers in blends ,pick density and weave .The objective was to determine the influence of fabric factors such as the constituent fibers ,pick density and weave characteristics on th…

Textile materials and evaluationsColor perception and design

Electrospun Nanofiber Scaffolds for Investigating Cell–Matrix Adhesion

Joshua S. McLane、Nicholas J. Schaub、Ryan J. Gilbert 等 4 位作者2013-01-01Methods in molecular biology

It has become increasingly clear that the cellular microenvironment, in particular the extracellular matrix, plays an important role in regulating cell function. However, the extracellular matrix is extraordinarily complex in both its makeup and its physical properties. Therefore, there is a need to develop model syst…

Advanced Sensor and Energy Harvesting MaterialsElectrospun Nanofibers in Biomedical ApplicationsTissue Engineering and Regenerative Medicine