Zhu Yazhe2013-01-01Rejiagong gongyi
The Anycasting software is casting simulation system for development of all kinds of casting process.It can simulate the mould filling,heat conduction,solidification process and stress field.The process parameters of the casting wheel hub were simulated with Anycasting software.And the process was optimized.Eventually…
Manufacturing Process and OptimizationMetallurgy and Material FormingMetal Alloys Wear and Properties
Zhu Hu2013-01-01Rengong jingti xuebao
The Al-doped ZnO( ZAO) films were obtained on the glass substrate by RF magnetron sputtering technique, changing the working pressure from 3 Pa to 10 Pa. The samples were characterizated by XRD,UV-visible spectrophotometer and SEM. All films showed average transmission over 85% between 400 nm and 760 nm wavelength and…
ZnO doping and propertiesGaN-based semiconductor devices and materialsGa2O3 and related materials
Guangbin Cheng2013-01-01Chinese Journal of Energetic Materials
In order to establish a safe,effective and green method,the reduced-sensitivity HMX was prepared by recrystallization from ionic liquid-solvent system with solvent-nonsolvent technique,using a series of ionic liquids NO3,[mimBSO3H]NO3,NO3 and [Et3NBSO3H]NO3 as crystal assistants,acetone and cyclohexanone as solvent.Re…
Energetic Materials and CombustionFlame retardant materials and propertiesThermal and Kinetic Analysis
Yang Zhao2013-01-01China Surface Engineering
The mixture of epoxy resin E-51/711 was microencapsulated following an in-situ poly(urea-formaldehyde) microencapsulation.The microcapsules were prepared successfully,and their surface was rough.The particle size distribution of the microcapsules ranged between 25 and 375 μm.Mimicking the self-repairing principle of b…
Polymer composites and self-healingEpoxy Resin Curing ProcessesPhotopolymerization techniques and applications
L CHEN2013-01-01Huagong jinzhan
C5fraction from ethylene plant contains a large number of linear unsaturated molecules and cyclopentadiene with mass fraction of more than 16%. A light-colored petroleum resin can be obtained from reaction of C5fraction using BF3as catalyst. Cyclopentadiene should be first removed when its concentration is high,so the…
Mesoporous Materials and CatalysisPhotopolymerization techniques and applications
Xiaoqi Liu2013-01-01Journal of Salt and Chemical Industry
The element like Cl,Ca and Mg etc.is determined with semi-quantitative method using X-ray fluorescence standardless analysis method.Compared with traditional method,the method has the advantage of simple operation,multi-element simultaneous analysis,high precision and accuracy.It is suitable to apply on detecting salt…
Cultural Heritage Materials AnalysisX-ray Spectroscopy and Fluorescence AnalysisX-ray Diffraction in Crystallography
Yan Liu2013-01-01OpenAlex
An 8 mega-pixel hybrid diffractive-refractive mobile phone camera lens is designed with ZEMAX.The system includes three plastic aspheric lenses and an IR filter.The F number is 2.85 and FOV is 64.The optical total length and back focal length are 5.9 mm and 0.6 mm respectively.The MTF of the lens at the Nyquist freque…
Advanced optical system designOptical Coatings and GratingsOptical Systems and Laser Technology
MA Tian-jun2013-01-01Materials Science and Technology
For the purpose of optimizing hot working processes for Incoloy 800H,two-pass hot compression tests have been performed on MMS-300 thermo-simulation machine.The flow stress curves of two-pass compression under different deformation conditions have been plotted,and the effects of deformation temperature,strain,strain r…
Microstructure and Mechanical Properties of SteelsMetallurgy and Material FormingMetal Alloys Wear and Properties
Fan Xiao2013-01-01China Foundry Machinery & Technology
Both domestic and foreign research status and development of machinability of high strength gray cast iron have been reviewed with analysis of existing problems at home,corresponding improvement measures and the future trends.
Microstructure and Mechanical Properties of SteelsMetallurgy and Material FormingMetal Alloys Wear and Properties
Dong Xiaoshua2013-01-01Fushi kexue yu fanghu jishu
The corrosion behavior especially pitting resistance of TTS443 stainless steel, in comparison with 304 stainless steel, was studied by means of polarization curves and electrochemical impedance spectroscopy(EIS), in NaCl and HCl solutions respectively. The results showed that, with the increase of mass fraction of Cl-…
Corrosion Behavior and InhibitionHydrogen embrittlement and corrosion behaviors in metalsWelding Techniques and Residual Stresses
FU Weixi2013-01-01Gas & Heat
Several methods to produce hydrogen for proton exchange membrane fuel cells by natural gas reforming,which include steam reforming,partial oxidation reforming,autothermal catalytic reforming and catalytic cracking are introduced. The hydrogen purification methods including desulfurization,water- gas-shift,preferential…
Catalytic Processes in Materials ScienceCatalysts for Methane ReformingCarbon Dioxide Capture Technologies
Zhang Ze-jian2013-01-01Gōsei jushi
Influence of the types and contents of the flame retardant on the pyrolysis performance of rigid polyurethane foams(PUF) was studied.The results showed that thermal decomposition temperature of PUF adding antimony trioxide was only slightly higher than the pure resin,and that of the composite material containing MPOP…
Polymer composites and self-healingFlame retardant materials and properties
Xiong Long2013-01-01Nondestructive Testing
The detection sensitivity and magnetic flux leakage are decided by the magnetization of rail for fast magnetic flux leakage testing.The main work of this thesis is to make sure how speed of detection,excitation and lift-off shall affect the magnetization of rail.The magnetic field intensity between rail and yoke,ampli…
Magnetic Properties and ApplicationsNon-Destructive Testing TechniquesAdvanced Sensor and Control Systems
Zhang Gai-lu2013-01-01Surface Technology
Fe-6.5%Si high silicon steel sheet was available after silicon was deposited on the surface of plain pure steel sheet with 0.2 mm heavy through PCVD,then treated at a high temperature.Analyzed the impact of deposition process parameters on the surface of the silicon content by orthogonal test,the relationship between…
High-Temperature Coating BehaviorsMetal Alloys Wear and PropertiesEngineering Applied Research
Ruiting Huo2013-01-01Textile Research Journal
The nano-TiO2 microcapsule was prepared by complex coacervation with nano-TiO2 as the core and gelatin and arabic gum as the wall.The average particle size,embedding rate,and particle size distribution variance of the microcapsules were used to evaluate the process of preparation.The impact of pH value,reaction temper…
Electrospun Nanofibers in Biomedical ApplicationsNanomaterials for catalytic reactions
Xiaobin Yan2013-01-01Rengong jingti xuebao
Amorphous indium gallium zinc oxide( In-Ga-Zn-O) thin films were deposited on glass substrates at room temperature by RF magnetron sputtering method and annealed in vacuum. The effects of different annealing temperature on the structure,electrical and optical characteristics were investigated systemically. The results…
ZnO doping and propertiesThin-Film Transistor TechnologiesGa2O3 and related materials
Cheng Bao-zhen2013-01-01Leather and Chemicals
This paper briefly described the structure and application of the collagen and summarized the extraction method of collagen.The characterization method of the structure of collagen and molecular weight determination method were concluded so as to provide evidences for the application of collagen.Finally,the control of…
Collagen: Extraction and Characterization
Gao Yu2013-01-01Chinese Journal of Spectroscopy Laboratory
Portable total reflection X-ray fluorescence analyzer is applied in this article,with Sc as internal standard,determination of Cu,Zn,Cr,Fe,Mn,Co,Ni in clean water simultaneously.Under the selected conditions,the method detection limits are 3.1—5.1Lg/L.Surface water samples analysis results are consistent with ICP-Ms m…
X-ray Spectroscopy and Fluorescence AnalysisNuclear Physics and ApplicationsX-ray Diffraction in Crystallography
Zhao Dongxi2013-01-01Journal of Liaoning Normal University
We have investigated the process of the proton transfer in the formic acid,first obtained transition state at MP2/6-311+G(d,p)level,and then determined reaction routes(IRC)at MP2/631G(d)level.We selected nine points along with IRC.The molecular faces and the molecular interface characteristic contours of formic acid w…
Advanced Chemical Physics StudiesCatalysis and Oxidation ReactionsMachine Learning in Materials Science
Wei Su-juan2013-01-01Journal of Guangxi University
To study the catalysis performance of porous chitosan supported tetrakis[4-(sodium sulfonato) phenyl]porphyrin manganese complex [Mn TPPS/CTS(p) ]for aerobic oxidation of toluene,tetrakis-[4-(sodium sulfonato) phenyl]porphyrin manganese was anchored onto chitosan by salt bond and coordinated bond.The catalyst complex…
Electrochemical sensors and biosensorsPorphyrin and Phthalocyanine ChemistryAnalytical Chemistry and Sensors