Materials Literature

文献浏览

按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。

清除
第 242561 / 281728 页 · 当前展示 4,851,201–4,851,220 / 5,634,557 条匹配结果 · 摘要仅作预览

Adsorption Removal of Basic Nitrogen in the Shale Diesel by USY Molecular Sieve

Ruan Ben-Xi2013-01-01OpenAlex

Adsorption removal of basic nitrogen compounds in the shale diesel with USY molecular sieves was investigated.The effect of adsorption time,temperature and adsorbent/oil weight ratio on the nitrogen removal rate was studied,and found that highest nitrogen removal rate(30.73%) are obtained under the following condition…

Catalytic Processes in Materials ScienceCatalysis and Hydrodesulfurization StudiesCatalysis and Oxidation Reactions

Experimental Research on Internal Thread Formation by Cold Extrusion Based on Low Frequency Vibration

Miao Hong2013-01-01Acta Aeronautica Et Astronautica Sinica

Internal thread formation by cold extrusion based on low-frequency vibration can realize vibration extrusion by extruding tap.It can turn the process of dry friction into a more favorable state of boundary friction.Therefore it can overcome the defect of traditional cold extrusion that the coolant cannot easily enter…

Metallurgy and Material FormingMetal Alloys Wear and PropertiesPowder Metallurgy Techniques and Materials

Parameters optimization for EAST divertor W/Cu water-cooling monoblocks

Tiejun Xu2013-01-01Hejubian yu dengliziti wuli

The structure of a new divertor cooling module is introduced for EAST superconducting tokamak.By using the FLUENT finite elemente software,the steady state thermal analysis was performed for the model with different parameters so as to quantifictional study the change rule the heat exchanged capacity with its paramete…

Magnetic confinement fusion researchFusion materials and technologiesSuperconducting Materials and Applications

Distinguishing magnetizing inductance of power transformer based on hysteresis loop

Luo Jian2013-01-01OpenAlex

On account of difficulty in finding magnetizing inductance when the transformer is no load and secondary-side voltage and current data are unknown, a method is put forward to solve magnetizing inductance of transformer based on hysteresis loop of dispersed data point. The concrete step is as follows. Firstly, accordin…

Magnetic Properties and ApplicationsSmart Grid and Power SystemsPower Systems and Renewable Energy

Microstructure and properties of transient liquid-phase diffusion bonded joint of AZ31B/Cu dissimilar metal

Mingjing Wang2013-01-01The Chinese Journal of Nonferrous Metals

Magnesium alloy AZ31B and Cu dissimilar metals were bonded by the transient liquid-phase diffusion bonding(TLP) process.The microstructures and properties of AZ31B/Cu TLP bonded joint were researched by SEM, micro-hardness test and XRD.The results show that under the condition of 500 ℃,40 min and 2.5 MPa,the diffusion…

Magnesium Alloys: Properties and ApplicationsAluminum Alloys Composites PropertiesAdvanced Welding Techniques Analysis

Fixation of Dust Layer on Composite Insulator Surface and Its Effect on Insulating Properties

Yingyan Liu2013-01-01Gao dianya jishu

Pollution layer on insulator surface may change under surface discharge activities during the long-term running of insulators,which influences the contamination characteristics of the insulators.In order to investigate these influences,on the basis of discharge simulation experiments on insulator surface,we studied th…

High voltage insulation and dielectric phenomenaAerosol Filtration and Electrostatic PrecipitationSmart Materials for Construction

Influence of AC Magnetic Field on Microstructure and Wear Behaviors of Laser Cladding Fe-Based Composite Coating

Tang Shu-jun2013-01-01Tribology

Fe-Cr-Si-B-C composite coatings were fabricated on 45 medium carbon steel substrate using electromagnetic control assisted laser cladding process.The microstructure,phase composition,friction and wear behaviors of the composite coatings were investigated by X-ray diffraction,scanning electron microscopy,energy dispers…

Additive Manufacturing Materials and ProcessesHigh Entropy Alloys StudiesMetal Alloys Wear and Properties

Magnetic Memory Effect of Q235 Steel Under Static Tension Condition

LI Xiao-men2013-01-01Physics Examination and Testing

Based on the metal magnetic memory testing(MMMT),the relationship between the magnetic memory signals and the stress concentration degree for Q235steels static tensile test under different conditions are investigated.Then the magnetic domains at different points with various stresses on the sample are observed.The res…

Microstructure and Mechanical Properties of SteelsMagnetic Properties and ApplicationsNon-Destructive Testing Techniques

Compressive Stress-Strain Relationship of Hybrid Fiber-Reinforced Reactive Powder Concrete after Exposure to High Temperature

Zheng Wen-zhon2013-01-01Journal of Building Materials

The uniaxial compression experiments were conducted on 120specimens with the size of 70.7mm×70.7mm×228.0mm for hybrid fiber-reinforced reactive powder concrete(RPC)after being exposed to 20-900℃.The effects of fiber content and exposure temperature on the mechanical properties of RPC were investigated,including the un…

Advanced ceramic materials synthesisInnovative concrete reinforcement materialsFire effects on concrete materials

Doping Effects of Sb, Bi, Zr and Si on the Properties of YAG∶Ce Phosphor

Sun Xia2013-01-01Wuji huaxue xuebao

The Sb3 +,Bi3 +,Zr4 + and Si4 +doped YAG ∶Ce yellow phosphors were synthesized by high temperature solid-state method.The doping effect and the related mechanism of Sb3+,Bi3+,Zr4+ and Si4+ on the luminescence intensity of YAG ∶Ce were studied.The results show that the luminescence intensity firstly increases with the…

Luminescence Properties of Advanced MaterialsRadiation Detection and Scintillator Technologies

Ventilation mode of indoor substation based on integrated environmental control technology

Mao Zhengping2013-01-01Journal of Beijing Jiaotong University

The environment of the indoor substation achieves the integrated control of the temperature,the humidity and the poisonous gas SF6 by combing the exhaust equipment with the air conditioning and refrigeration.Mathematical models of the temperature and the humidity are built according to the integrated factors of indoor…

High voltage insulation and dielectric phenomenaAerosol Filtration and Electrostatic PrecipitationThermal Analysis in Power Transmission

Microstructure characterization from X-ray micro-tomography and tensile failure mechanism of 4D in-plane carbon / carbon composites

XU Cheng-ha2013-01-01Journal of Solid Rocket Technology

High-resolution X-ray tomography technology was adopted to analyze inner structural features of multi-directional braided carbon / carbon composites.The tensile property and failure mechanism of this material at room temperature were also studied. Results show that the fiber tows of 4-D C / C composites have improved…

Advanced ceramic materials synthesisFiber-reinforced polymer compositesAdvanced materials and composites

[Phytoplankton's community structure and its relationships with environmental factors in the rivers of Tongling City, Anhui Province of East China in winter].

Li Wang、Wei Wei、Ping Zhou 等 5 位作者2013-01-01PubMed

Tongling is one of the main non-ferrous metal mining areas in China, and the biodiversity in the river ecosystem of this area is seriously affected by heavy metals as a result of mining activities. In the winter in 2010, an investigation was conducted on the community structure of phytoplankton and its relationships w…

Geochemistry and Elemental AnalysisDiatoms and Algae Research

An uncooled infrared readout circuit with substrate temperature compensation

Yun Zhou、Jian Lv、Baobin Liao 等 4 位作者2013-01-01JOURNAL OF INFRARED AND MILLIMETER WAVES

针对非制冷红外探测器系统,设计了一种无需衬底温度稳定器——热电制冷器(TEC)的读出电路(ROIC)结构.首先分析了衬底温度对微测辐射热计的特性的影响,利用ROIC对衬底温度变化引起的微测辐射热计的特性的变化进行补偿,实现ROIC的输出信号与衬底无关.该ROIC已在0.5 μm CMOS工艺下成功流片,并应用了到阵列大小为320×240的非制冷微测辐射热计焦平面上.测试结果表明: 在衬底温度变化20 K时,ROIC输出信号仅变化2 mV,实现了去除TEC后衬底温度补偿的功能,有效地降低了系统功耗.该ROIC在低功耗,小体积的非制冷红外探测器上有着广泛的应用.

Phase-change materials and chalcogenidesCCD and CMOS Imaging SensorsCalibration and Measurement Techniques

Numerical simulation for impulsively loading mechanism of a point pyrotechnic separation device

Hanjun Huang2013-01-01Zhendong yu chongji

In order to quantitatively understand impulsively loading mechanism of a point pyrotechnic separation device,the finite element models of three processes including explosion,strain energy release and impact were built,respectively.The three different physical processes and the induced responses were investigated,and t…

High-Velocity Impact and Material BehaviorStructural Response to Dynamic LoadsElectromagnetic Launch and Propulsion Technology

Investigation on pyrolitic carbon-coated microcrystalline graphite as anode material for Li-ion batteries

Haihe Xiao2013-01-01Journal of Functional Biomaterials

The phenolic resin carbon-coated microcrystalline graphite,as anode materials for lithium-ion battery,was prepared by being coated with phenolic resin carbon by immersion method,following with carbonization.The influences of the content of phenolic resin carbon on the structure and electrochemical performances of micr…

Advancements in Battery MaterialsFiber-reinforced polymer compositesGraphite, nuclear technology, radiation studies

Effect of Mg(BH_4)_2 and MgH_2 on Thermal Decomposition Performance of RDX

Jinhua Peng2013-01-01OpenAlex

Metal hydrides(Mg(BH4)2 and MgH2) with high heat values are expected to improve the explosion properties of RDX.However,they bring safety problems at the same time.In order to explore the consistencies between RDX and these two kinds of metal hydrides,the DSC was used to study the thermal decomposition characteristics…

Energetic Materials and CombustionCombustion and Detonation ProcessesThermal and Kinetic Analysis

Condition Monitoring of Corrosive Sulfur Reaction in Transformer by Copper Ion Analysis

Shangkun Gong2013-01-01Gao dianya jishu

In order to investigate monitoring methods of sulfur corrosion in transformer,the copper content in oil and the sulfur-corrosion test results of 40 operating transformers were compared.Moreover,dynamic copper strip corrosion was tested by simulation in transformer oil samples filled with nitrogen,air and oxygen,respec…

High voltage insulation and dielectric phenomenaPower Transformer Diagnostics and InsulationNon-Destructive Testing Techniques

Research Progress of Inhibition Mechanism of Benzotriazole as Corrosion Inhibitor of Copper

Yang Yu2013-01-01Cailiao baohu

A review was provided of the research progress of the inhibition mechanism of benzotriazole (BTA) as corrosion inhibitor for copper. The surface structure and composition as well as the corrosion inhibition type of protective films of BTA formed in acidic medium, nearly neutral medium and alkaline medium were highligh…

Synthesis and properties of polymers

Experimental study on direct catalytic reduction of NO by metallic iron

Cheng Hao2013-01-01Meitan xuebao

Catalytic reduction of NO by metallic iron mesh roll was experimentally studied in a horizontal ceramic tubular reactor.The NO reduction efficiency was tested in the temperature range of 300-1 100 ℃ in the atmospheres of CO,O2,CO2 and simulated flue gas respectively.The results show that metallic iron is very effectiv…

Catalytic Processes in Materials ScienceIndustrial Gas Emission Control