K. A. Bello、Alditiyo Ibrahim、A. I. Ezeribe 等 5 位作者2013-01-01OpenAlex
higher values (106-82%) than the control (73 0 ). The linear densities of the alternative agents were higher than the control. The alkalinity and acidity (pH) of the alternative agents after the scouring process were environmentally friendly in comparison with the highly alkaline NaOH (control), thus unfriendly. The c…
Natural Fiber Reinforced CompositesDyeing and Modifying Textile FibersTextile materials and evaluations
J. Shahitha Parveen、Shahid Majeed2013-01-01OpenAlex
A gel polymer electrolyte (GPE) based on an electrospun membrane of Poly (ethylene oxide) / Polyurethane (PEO/PU) incorporated with lithium ions was prepared and its performance in lithium batteries were studied. Blended form of PEO and PU electrospun fibrous membranes were prepared by electrospinning technique. Incor…
Advancements in Battery MaterialsAdvanced Battery Materials and TechnologiesConducting polymers and applications
Subhankar Maity、Kunal Singha、Mrinal Singha2013-01-01OpenAlex
Different techniques of micro-image analysis of nonwoven structures have been discussed in this article. The characteristic features of these techniques have been critically examined. The instruments used of these techniques have been described with schematic d iagrams. The advantages and disadvantages to the techniqu…
Textile materials and evaluationsIndustrial Vision Systems and Defect DetectionSurface Roughness and Optical Measurements
Maude Ferrari、J.-P. Mérel、Sébastien Leclerc 等 5 位作者2013-01-01Qucosa (Saxon State and University Library Dresden)
Dispersion remains, today, a highly topical subject. Our group has been interested in characterizing this phenomenon by pulsed-field-gradient NMR technique. Direct measurement of the dispersion coefficient can be done with a Pulsed Gradient Spin Echo (PGSE) sequence by assuming that the asymptotic regime is reached. I…
Material Dynamics and PropertiesSurfactants and Colloidal SystemsNMR spectroscopy and applications
G. Sivakumar2013-01-01OpenAlex
Ecofriendly cement may be obtained by partial replacement of cement with certain low cost waste materials. Sugarcane bagasse ash is one such material which is a residue resulting from the burning of sugarcane bagasse in boilers for power generation. Sugarcane bagasse ash (BGA) is a waste material and being disposed to…
Concrete and Cement Materials ResearchClay minerals and soil interactionsMineral Processing and Grinding
Rolf Sjöblom、Staffan Lindskog、Lale Andreas2013-01-01Diva portal (Dalarna University Library)
The fields of landfilling of conventional waste and that of surface disposal of nuclear waste have developed quite independently and also partly out of phase with each other. The paper analyses what knowledge and experience might be mutually beneficial as well as what further knowledge may be needed.It is found that e…
Risk Perception and ManagementGraphite, nuclear technology, radiation studiesNuclear and radioactivity studies
Eyad M. Nawafleh、Tareq T. Bataineh、Muna K. Irshedat 等 5 位作者2013-01-01OpenAlex
The inhibitive effect of the extract of Salvia Judica on aluminum corrosion in 1 M NaOH solutions was investigated by using the weight loss method at different temperatures. It was found that the extract play as corrosion inhibitor for aluminum corrosion in 1 M NaOH solution. The inhibition action of the extract was d…
Corrosion Behavior and InhibitionNatural product bioactivities and synthesisBioactive Compounds and Antitumor Agents
Nadia Gad、Alaa Zaghloul2013-01-01OpenAlex
Abstract: Thermodynamics of Cobalt (Co) exchange using a kinetics approach was investigated in alluvial soil samples from two surface soil samples (0-30 cm) of Egyptian soils selected from Nile Delta mainly varied in clay content and other related properties. Kinetics of adsorption and desorption were determined at te…
Clay minerals and soil interactionsIron oxide chemistry and applications
Ahmed Majeed Jassem、Wisam A. Radhi、Hadi A. Jaber 等 4 位作者2013-01-01Journal of Basrah Researches (Sciences)
bstract A In this work, a series of novel 1-(2-(4-xphenyl)-5-(phenylamino)-1,3,4oxadiazole-3(2H)yl) ethanone (X=H,OH,Cl,NO2,N(CH3) (4a-e) were prepared from the condensation of Schiff base (3a-e) with acetic acid. The azomethines were prepared from the corresponding 4phenyl semi carbazide(1) with aryl aldehydes (2a-e)…
Synthesis and biological activityInorganic and Organometallic ChemistrySynthesis and properties of polymers
Namita Soni、Soam Prakash2013-01-01International Journal of Recent Scientific Research
This work was to evaluate the efficacies of the nanoparticles (NPs) of silver (Ag) and Gold (Au) against the major tropical mosquitoes. In the present study, the Ag and Au NPs were synthesized by using the cell free extract of Fusarium oxysporum f.sp. pisi fungus. The bioreduction of AgNPs and AuNPs was monitored by u…
Nanoparticles: synthesis and applicationsInsect Pest Control Strategies
Ghiasi Norali、Farhang Razavi2013-01-01OpenAlex
Freshly harvested tomato fruit (Solanum lycopersicum) were pre-treated with 0, 50, and 100 µM prohexadione-calcium (Pro-Ca) and then stored at 1 °C for 21 days to investigate the effect of Pro-Ca treatment on electrolyte leakage (EL), malondialdehyde (MDA), proline and total phenols contents, and activity of phenylala…
Postharvest Quality and Shelf Life ManagementNanocomposite Films for Food PackagingPlant Physiology and Cultivation Studies
D Rani Prameela D Sreenivasulu P Eswara Prasad、R. Vinu Chandran2013-01-01OpenAlex
Department of Pharmacology, Krishna Theja College of Pharmacy, Tirupati, Andhra Pradesh, India. Department of Pharmacology, School of Pharmacy, Vels University, Pallavaram, Chennai. Tamil Nadu, India. Department of Pharmacology, Mother Theresa Post Graduate and Research Institute of Health Sciences, Pondicherry, India…
Phytochemicals and Medicinal PlantsMedicinal Plants and NeuroprotectionPhytochemistry and Bioactive Compounds
Andrew Muzinda、Rumbidzai Muvunzi、Catherine Maware2013-01-01OpenAlex
The paper outlines how experiments were carried out to determine the optimum chromium/carbon (Cr/C) ratio that brings the required hardness of 65HRC an d to establish a quenching technique for the grindi ng balls. Matlab was also used to develop a mathematical model for the ball wear rate and its cost effectiveness ba…
Metallurgy and Material FormingMetal Alloys Wear and PropertiesEngineering Structural Analysis Methods
Uzma Syed、Rafique Ahmed Jhatial2013-01-01DOAJ (DOAJ: Directory of Open Access Journals)
Fabric properties such as pilling and abrasion resistance and tensile strength vary when greige fabric is processed further. The quality of dyed fabric depends on the quality of greige fabric. Cotton Plain and Twill weave fabrics were woven at three different warp yarn tension and then dyed using monochlorotriazine, D…
Dyeing and Modifying Textile FibersTextile materials and evaluationsColor Science and Applications
Mihaela Amarandei、K. N. Berdich、L. Marsavina 等 6 位作者2013-01-01Florence Research (University of Florence)
Necuron is a polyurethane material (PUR) that is used for various applications of industry. The use of these materials in industry increased in recent years because of their good mechanical and machinability properties. Good knowledge of the mechanical behaviour of these materials is highly important therefore this wo…
Polymer composites and self-healingErosion and Abrasive MachiningMaterial Selection and Properties
Dan Donescu、Raluca Ianchiş、Cristian Petcu 等 8 位作者2013-01-01OpenAlex
Present paper studies the possibility to obtain polymer-clay nanocomposites using poly(3methacrylamidopropyl (N,N-dimethyl) dodecyl ammonium bromide) and several commercial clays- Cloisite Na, Cloisite 30B, Cloisite 93A, Cloisite 20A, Cloisite 15A in three different solvents (ethanol, chloroform and propyleneglycol mo…
Polymer Nanocomposites and PropertiesInorganic and Organometallic Chemistry
Ahmad Saeed、Nisar Ali、Waqar Adil Syed2013-01-01OpenAlex
pressure. The deposited thin films were annealed at 150 ° C in tube furnace in the presence of argon gas. For characterization, thin films were subjected to X-ray diffraction (XRD), SEM, EDS and J.A. Woollam variable angle ellipsometry (VASE) for structural, surface morphological, elemental composition and optical pro…
TiO2 Photocatalysis and Solar CellsSolar Thermal and Photovoltaic SystemsChemical and Physical Properties of Materials
Muhammad Yusri Zulkafli、Norinsan Kamil Othman、Аzwan Mat Lazim 等 4 位作者2013-01-01OpenAlex
Abstract-- The effect of carboxylic acid from Palm kernel oil (PKO) on carbon steel SAE 1045 in 1M hydrochloric acid (HCL) media by using weight loss technique for corrosion prevention. The inhibition efficiency of PKO was calculated using weight loss technique. Weight loss and corrosion rates of carbon steel decrease…
Corrosion Behavior and InhibitionPetroleum Processing and AnalysisConcrete Corrosion and Durability
Sachin Yadav、Sharda E. Kondawar、S. Varne2013-01-01OpenAlex
Candesartan is an angiotensin-receptor blocker (ARB) with very low bioavailability approximately 15% that can be improved by increasing its solubility and dissolution rate. The aim of this study is to enhance dissolution of candesartan as a model hydrophobic drug through application of liquisolid technology. It was fo…
Drug Solubulity and Delivery SystemsCrystallization and Solubility StudiesPharmacological Effects of Natural Compounds
Saif Ur Rehman、Syed Mujtaba Shah、Mohammad Siddiq2013-01-01OpenAlex
Summary: Ag NPs were synthesized by the chemical reduction method and were optically characterized. The change in size of the nanoparticles and position of surface Plasmon resonance was studied as a function of concentration of different reactants by using UV-Visible spectroscopy. Red shift was observed in the positio…
Gold and Silver Nanoparticles Synthesis and ApplicationsHydrogels: synthesis, properties, applications