Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Directed self-assembly of nano or microsized materials as building blocks is a very exciting research topic to construct large-scale but still uniform 2D or 3D architectures. Graphene shows great potential as an advanced building block for fabricating varied graphene-based functional films or architectures together wi…
The Tetrahedrite’s family constitutes a complete solid-solution series, and is among the most frequent complex sulfides in Nature. This kind of structure can be generically expressed by the composition, Cu12Sb4S13. We have calculated the electronic band structure of Cu12Sb4S13 and Ag6Cu6Sb4S13 (with band gaps of 1.24…
Two commercial powdered organoclays, Cloisite 15A and Cloisite 30B, as long-chain organoclays, and two organically modified clays with tetramethylammonium chloride (TMA-clay), as short-chain organoclays were used in this study to investigate their potentials for crude oil removal from salty waters. Batch experiments w…
The wettability of graphite by the Ag-M based (M: Cd, In Sn, Sb) liquid alloys was measured using the sessile drop method at a temperature interval of 1273 1473 K. Except the Ag-Cd alloys, the investigated systems exhibit worse wettability than that of Ag (host metal) melt, within the investigated temperature range. T…
The growth mechanism of TiO(2) films and their morphology are reported using the reactive-layer-assisted deposition (RLAD) method under ultrahigh vacuum conditions. The oxide film formation involves Ti atom deposition on top of amorphous solid water (ASW) condensed on a SiO(2)/Si(100) support at 90 K. Subsequent annea…
We report unprecedented dramatic changes in the 647.1 nm Raman signal of PbZr(0.6)Ti(0.4)O(3) occurring in the same pressure ranges as the critical pressures of the antiferrodistortive and ferroelectric-paraelectric phase transitions. This huge decrease in intensity of both the Raman modes and the background, observed…
Work hardening reserches in metal cutting has an important significance in improving surface quality of the workpiece and the service performance of parts. The paper introduces current researches of the work hardening in metal cutting process, analyses the forming mechanism and influencing factors of the work hardenin…
A temperature controlled carbonization process (5-800 °C for 1-4 h) of metal forms of various types of partially or completely saturated sulphonated styrene-divinylbenzene copolymer based ion-exchangers loaded with various valence state metal ions has been evaluated. The effect of temperature, nature and valence of me…
This study presents a novel approach for using a micro rotary wire Electrical Discharge Machining (micro w-EDM) to thin the grinding-edge of a wheel-tool made from boron-doped polycrystalline composite diamond (PCD). For thinning the PCD, two discharge circuits (a Resistance-Capacitance (RC) circuit and a transistor)…
By applying the cellular automaton method the short-range diffusion processes in metals can be efficiently simulated. Several examples for the two-and three dimensional modeling of recrystallization and grain-coarsening are know at the literature. In some previous works, results have been performed concerning the two-…
The effect of the impurity content on the evolution of the ultrafine-grained (UFG) microstructure in low stacking fault energy Ag and its stability at room and elevated temperatures were investigated. Samples of silver having high (99.995%) and somewhat lower (99.99%) purity levels were processed by equal-channel angu…
The geometry and mechanical properties of solid and hollow carbon fibres were investigated by light-and scanning electron microscopy, and by single fibre tensile tests. The hollowness factor of fibres was determined by their external and internal diameter. The tensile strength was determined by single fibre tensile br…
In this paper the friction and wear characteristics of vinylester and vinylester composites have been investigated under dry sliding conditions for different applied normal load, sliding speed and sliding distance. The experiments have been carried on a pin on disc arrangement at normal room temperature conditions. Th…
The presence of organic compounds on wastes, especially plastics, is considered an important source of energy. However, most of these plastics contain polyvinyl chloride (PVC), causing recycling problems when it is considered a thermal valorization process for its treatment [1], preventing the use of those residues on…
Conventional methods for preparing ceramic bodies, such as cold isostatic pressing, gypsum-mold slip casting, and filter pressing are not completely suitable for fabricating large and thick ceramic plates, because of disadvantages such as the high cost of equipment, formation of density gradient, and differential shri…
The alkali-aggregate reaction (AAR) in concrete is a group of chemical reactions that involves the reaction of certain minerals present in the aggregates with alkali and hydroxyl ions in the interstitial solution of cement paste in concrete. These reactions form an alkaline hygroscopic gel that absorbs water and expan…
Vanadium carbide is known for its applications due to extreme hardness and high melting point. In this present work, vanadium carbide nanoparticles have been synthesized in a specially designed stainless steel autoclave by solvothermal route using vanadium pentoxide (V2O5) as precursor along with a hydrocarbon acetone…
Ethylene tar (ET) was utilized as raw material, 1,4-benzenedimethanol and trioxane as crosslinking agent to prepare condensed poly-nuclear aromatic resin (COPNAR). FT-IR, 1H-NMR, TGA, elemental analysis, and improved Brown-Ladner calculation were systematically conducted for ET, COPNAR, and COPNAR/graphite composites…
Several kinds of alloys Ni-based, Fe-based and Al-based oxide dispersion strengthened (ODS) and carbide dispersion strengthened (CDS) have been produced through mechanical alloying. Precipitation-strengthened or dispersion-strengthened steels are a kind of high strengthened steel using fine precipitation or dispersion…
This paper uses planar ring sensor for dielectric measurements of low-loss powder materials by applying conversion of measured re∞ection coe-cient to relative dielectric constant via a lumped-element model. The ring sensor has been fabricated using 1.58mm thickness of FR4 substrate and designed to operate at a frequen…