Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
The synthesis of alumina (Al2O3)-composites having different amount of very fine titanium and titanium carbide reinforcement-particles has been explored. Two experimental steps have been set for the synthesis; the first step consisted of the pressureless-sintering of Al2O3-titanium powders which were thoroughly mixed…
Pure zirconium oxide (ZrO2) nanoparticles with diameters 10-25 nm were synthesized from ZrOCl2.8H2O and Zr(SO4)2.H2O with benzyl alcohol as non-aqueous solvent medium using sol-gel method. Sodium lauryl sulfate was added as surfactants to control the particle size. The synthesized ZrO2 nanoparticles have a mixture of…
Since the development of plastic in the last century, being versitile it has become very popular for diversified uses. The problem appears when these plastics, particularly shoppers are disposed as waste. The current reuse and recycling rates for the plastic shoppers waste are very low. Construction Industry has a gre…
Although titanium has been recognized for its excellent bio-compatibility with human tissues and good corrosion resistance in some specific environments, little attention has been paid to the surface enrichment of the components by titanium. In this paper, titanium diffusion coating was formed on the surface of Ni-bas…
In this paper, preparation and characterization of a-SiNx thin films deposited by LPCVD method from free radicals of TCS and NH3 gaseous system were investigated. These radicals are made by passing each of the precursor gases separately over Pt-Ir/Al2O3 catalyst at the temperature of 600 ᐤC. Kinetics of this process w…
MoSi2-TiC nanocomposite powders were successfully synthesized with different ball to powder weight ratios (BPR) by ball milling of Mo, Si, Ti and graphite elemental powders. Formation of this composite was studied by X-ray diffraction (XRD). Morphology and microstructure of the milled powders were monitored by scannin…
This paper describes a modeling procedure for tandem cold metal rolling, including the linearization step and system identification for control. The tandem cold rolling process is described by a mathematical model based on algebraic equations developed for control purposes and empirical relations. A state-space model…
In the present investigation, the static immersion corrosion behavior of Al/Al2O3 and Al/SiC nanocomposites in 1 M HCl acidic solution was evaluated. The nanocomposites were fabricated using conventional powder metallurgy (P/M) route. The effect of nanoparticulates size and volume fraction on the corrosion behavior of…
In this study, the effects of reinforcement volume ratios (RVR) on composite structure and thermal conductivity were examined in Al-MgO reinforced metal matrix composites (MMCs) of 5%, 10% and 15% RVR produced by melt stirring. In the production of composites, EN AW 1050A aluminum alloy was used as the matrix material…
Coherency elastic strain between γ and is one of the effective factors which affect the morphology, spatial re-arrangement and coarsening kinetics of precipitates in nickel-base superalloys. In this investigation, using X-ray diffraction (XRD) technique, the - constrained and unconstrained lattice misfits wer…
This paper discusses the influence of fat type in the structure of ice cream, during its production by means of rheo-optical analysis. Fat plays an important part in the ice cream structure formation. It's responsible for the air stabilization, flavor release, texture and melting properties. The objective of this stud…
Manganese vanadate microtubes have been synthesized by a facile polyvinyl pyrrolidone-assisted hydrothermal route. X-ray diffraction pattern confirms that the microtubes are composed of monoclinic MnV2O6, tetragonal V2O5 and orthorhombic MnO2 phases. The outer diameter and inner diameter of the microtubes are about 30…
Due to increase water pollution by organic compound derived from hydrocarbons such as toluene, several alternative technologies for remediation of polluted water have been originated. In this work natural bentonites were modified with cetyltrimethylammonium (CTMA+) for obtaining organophilic bentonites. The obtained C…
The aim of this paper was to prepare a poly (vinylidene fluoride) (PVDF) membrane using different non-solvents in the coagulation bath for the phase inversion method. In order to increase the mechanical strength of membranes, facing the pressure of work, was used a macro-porous polyester support. The morphology and st…
ract The mould flux is a mixture of non-metallic oxides that, in contact with liquid steel melts, becomes a liquid slag which the mainly function is to lubricate and control heat transfer between mould and strand during the continuous casting process. The mould flux without fluoride has the advantage of decreasing the…
The research conducted in this paper focuses on the generation of a model for the quantification of energy consumption in building. This is to be done through one of the most relevant environmental impact indicators associated with weight per m2 of construction, as well as the energy consumption resulting from the man…
This paper describes fractographic features observed in aerospace composites failed under tensile loads. Unidirectional Carbon Fibre Reinforced Plastic (UD CFRP) and Unidirectional Glass Fibre Reinforced Plastic (UD GFRP) composite specimens were fabricated and tested in tension. The morphology of fractured surfaces w…
This paper investigates the underlying physics of a gravity car race. This work seeks to provide a sound theoretical basis to elucidate the design considerations that maximize performance while simultaneously dispelling false assertions that may arise from incomplete analyses. The governing equations are derived and s…