Materials Literature

文献浏览

按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。

清除
第 245670 / 276223 页 · 当前展示 4,913,381–4,913,400 / 5,524,455 条匹配结果 · 摘要仅作预览

Patterned Deposition of Allophane Nanoparticles on Silicon Substrates

Marco Fuchs、Zaenal Abidin、Christian Kübel 等 8 位作者2012-10-01Clays and Clay Minerals

Abstract In order to obtain nanopatterned surfaces, natural allophane particles originating from Japanese soils were immobilized as single particles on Si wafer substrates.When derived from aqueous suspensions, only a few nanoparticles were deposited and detected on the surface due to the weak adsorption of allophanes…

Photonic Crystals and ApplicationsBlock Copolymer Self-AssemblyElectrophoretic Deposition in Materials Science

The Influence of Hydrogen Treatment on Removal Degree of Iron Particles from CNTs

Iwona Pełech2012-10-01Fullerenes Nanotubes and Carbon Nanostructures

Multi-walled carbon nanotubes were obtained by catalytic chemical vapor deposition. Ethylene was applied as the carbon source and nanocrystalline iron without support was used as the catalyst. In order to remove amorphous carbon, the samples were reduced under hydrogen atmosphere. As a result of this process cementite…

Carbon Nanotubes in CompositesDiamond and Carbon-based Materials ResearchNanotechnology research and applications

Power system stability with parallel active filter ensuring compensation of capacitive reactive power of a resonant LC circuit

T. Płatek2012-10-01Bulletin of the Polish Academy of Sciences Technical Sciences

Abstract. This paper presents an analysis allowing for the determination of the differential equation describing the circuit of the active filter inverter output current control with an additional measurement of input voltage. The resulting equation allows to determine the conditions that ensure stable operation of th…

Power Quality and HarmonicsHVDC Systems and Fault ProtectionMagnetic Properties and Applications

Hydrogen Sulfide Corrosion of Weld Regions in API X52 Steel

Universidad Autónoma de Coahuila - Facultad de Ciencias Químicas、Luis F. Arenas、Gabriel García-Cerecero 等 4 位作者2012-10-01Ingeniería Investigación y Tecnología

Ingeniería Investigación y Tecnología es una publicación trimestral, arbitrada, de investigación científica y tecnológica editada e impresa por la Facultad de Ingeniería de la UNAM. Su propósito es difundir información y conocimientos originales e inéditos relacionados con la ingeniería. Es un espacio para profesores,…

Corrosion Behavior and InhibitionHydrogen embrittlement and corrosion behaviors in metalsWelding Techniques and Residual Stresses

CO OXIDATION: EFFECT OF Ce AND Au ADDITION ON MnOX CATALYSTS.

Miguel Andrés Peluso、Willinton Y. Hernández、M.I. Domínguez 等 6 位作者2012-10-01LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas)

The effect of cerium and/or gold addition to a manganese oxide which was greatly active in CO oxidation was studied. The catalysts obtained by this way were characterized by N2 adsorption, XRF, XRD and TPR, and their catalytic activity was measured in the CO oxidation reaction. The pure MnOx catalyst was active in the…

Catalytic Processes in Materials ScienceGas Sensing Nanomaterials and SensorsCatalysis and Oxidation Reactions

Metal Physics and Rolling Contact Fatigue Testing

R. H. Vegter、J. Slycke2012-10-01OpenAlex

A description of a novel rolling contact fatigue test for evaluation of bearing steel characteristics is presented. Unlike traditional approaches where bearings are tested until failure, the proposed testing method is based on monitoring the material response during testing. The measurement principles are based on cha…

Gear and Bearing Dynamics AnalysisMechanical stress and fatigue analysisMetal Alloys Wear and Properties

Rolling Contact Fatigue in Bearings: Phenomenology and Modelling Techniques

Pedro E.J. Rivera-Díaz-del-Castillo2012-10-01OpenAlex

Current understanding of rolling contact fatigue is reviewed. The stress developed in the subsurface as a function of loading conditions, along with the resulting microstructural changes are described. Focusing on the dissolution of hardening phases and the occurrence of recovery and recrystallization, the relationshi…

Metallurgy and Material FormingMechanical stress and fatigue analysisMetal Alloys Wear and Properties

Circuit model for metallic gratings with tapered and stepped slits

Francisco Medina、Raúl Rodríguez‐Berral、Francisco Mesa2012-10-01OpenAlex

The study of the transmission of electromagnetic waves through periodically perforated opaque screens, even though being a very classical topic, has received a renewed attention along the last fifteen years because of the discovery of the exciting phenomenon so-called extraordinary optical transmission [1]. The transm…

Metamaterials and Metasurfaces ApplicationsPlasmonic and Surface Plasmon ResearchOptical Coatings and Gratings

Composite right/left-handed (CRLH) phased-array feed network for frequency scanning antenna

Jun H. Choi、Yuandan Dong、T. Itoh2012-10-01OpenAlex

Frequency scanning antenna array based on composite right/left handed (CRLH) phased-array feed network is presented. The proposed array design method enables continuous beam scanning obtained through the feeding network design, which is different from the widely researched CRLH based leaky-wave antennas. It allows an…

Antenna Design and AnalysisMetamaterials and Metasurfaces ApplicationsMicrowave Engineering and Waveguides

Thermal analysis of an interior permanent magnet synchronous traction motor for high speed railway applications

Wei Chen、Jien Ma、Xiaoyan Huang 等 4 位作者2012-10-01International Conference on Electrical Machines and Systems

In this paper thermal behavior of a 600kW 4200r/min interior permanent magnet synchronous motor (PMSM) with forced ventilation in the stator was analyzed using Fluent. Due to its high power density and compact structure, accurate thermal analysis of PMSM traction machine is of great importance in designing and optimiz…

Electric Motor Design and AnalysisMagnetic Properties and ApplicationsMagnetic Bearings and Levitation Dynamics

Environmental Applications of Nanocrystalline TiO2in Combination with H2O2

S. N. Shintre、Pragati Thakur2012-10-01International Journal of Green Nanotechnology

Heterogeneous photocatalysis using nanostructured semiconductors constitutes one of the emerging advanced oxidation processes (AOP) for destructive oxidation of organic contaminants in water or air. Herein we report the kinetics of potocatalytic degradation of nitrophenols (NPs), namely, o-nitrophenol (ONP), m-nitroph…

TiO2 Photocatalysis and Solar CellsAdvanced Photocatalysis TechniquesAdvanced Nanomaterials in Catalysis

PEMBUATAN PERANGKAT LUNAK KONSTRUKSI KAPAL PERIKANAN BERDASAR PERATURAN KLASIFIKASI DAN KONSTRUKSI KAPAL KAYU BKI 1996

Untung Budiarto、Sarjito Jokosisworo2012-10-01Kapal Jurnal Ilmu Pengetahuan dan Teknologi Kelautan

Sebagian besar para pengrajin kapal kayu tradisional dalam pembangunan konstruksi kapal tanpa melalui proses rancang bangun atau perencanaan kapal yang sesuai dengan prosedur yang benar, karena pengerjaan bangunan fisik kapal hanya berdasarkan dari keterampilan atau kepandaian dan pengalaman pengrajin kapal yang diper…

Material Selection and PropertiesMarine and Offshore Engineering StudiesCoastal Management and Development

The Solid State Polymorphism and Dynamics of 2,3-Dimethylbutan-2-ol (2,3-DM-2-B)

E. Juszyńska、Maria Massalska-Arodź、Piotr M. Zieliński 等 4 位作者2012-10-01Acta Physica Polonica A

In the paper we present adiabatic calorimetry and dielectric spectroscopy results for 2,3-dimethylbutan-2-ol (2,3-DM-2-B), one of the isomers of neohexanol. For 2,3-DM-2-B we have detected the following phase transitions: C2 (249.8 K) C1 (262 K) Is. No glass phase was found. In both crystalline phases C2 and C1 three…

Material Dynamics and PropertiesThermodynamic properties of mixturesChemical Thermodynamics and Molecular Structure

Calculation and measurement of eigenmodes for a canned switched reluctance machine

C. Laudensack、Thomas Dentler、Qiang Yu 等 4 位作者2012-10-01International Conference on Electrical Machines and Systems

A great disadvantage of switched reluctance machines is the heavy noise emitation, caused by the radial forces in the airgap, which excite the structure to vibrate. Especially the stator vibrations produce heavy noise, when the frequencies of the excited forces correspond to the eigenfrequencies of the stator. Every s…

Electric Motor Design and AnalysisMagnetic Properties and ApplicationsMagnetic Bearings and Levitation Dynamics

Development of Erbia-Credit Super-High-Burnup Fuel: Evaluation of Minimum Erbia Content for Criticality Safety Analyses

Masatoshi Yamasaki、Hironobu Unesaki、Akio Yamamoto 等 5 位作者2012-10-01Nuclear Technology

The use of highly-enriched fuels is an effective method for reducing the number of spent fuel assemblies and improving fuel cycle economics, e.g., with >5 wt% 235U. However, from a criticality safety point of view, such high enrichment levels require a significant investment for the considerable modification of most f…

Nuclear reactor physics and engineeringNuclear Materials and PropertiesNuclear and radioactivity studies

Ketorol: New and Effective Corrosion Inhibitor for Mild Steel in Hydrochloric Acid Solution

M.A. Quraishi、Sudheer Sudheer、Eno E. Ebenso2012-10-01International Journal of Electrochemical Science

The corrosion inhibition properties of Ketorol on mild steel corrosion in 1.0 M HCl solution was studied using electrochemical impedance spectroscopy (EIS), potentiodynamic polarization and weight loss methods. EIS data were interpreted using CPE in equivalent circuit. Adsorption of the inhibitor on the mild steel sur…

Corrosion Behavior and InhibitionHydrogen embrittlement and corrosion behaviors in metalsConcrete Corrosion and Durability

Materials and Corrosion 10/2012

作者信息未提供2012-10-01Materials and Corrosion

Cover: The images show the aged microstructure of the heat resistant centrifugal cast alloy 35/45LC (Low Carbon ‐ LC) after creep rupture test (871°C/55.2 MPa/124hrs) using different imaging techniques: LM‐DIC, Light Microscopy ‐ Differential Interference Contrast; SEM‐BSE, Scanning Electron Microscopy ‐ Back Scattere…

Aluminum Alloy Microstructure PropertiesHigh Temperature Alloys and CreepElectron and X-Ray Spectroscopy Techniques

Magnetic Properties of Amorphous Fe–Si–B Powder Cores Mixed with Pure Iron Powder

Hyeon-Jun Kim、Seul Ki Nam、Kyu-Sung Kim 等 8 位作者2012-10-01Japanese Journal of Applied Physics

Magnetic Properties of Amorphous Fe–Si–B Powder Cores Mixed with Pure Iron Powder, Kim, Hyeon-Jun, Nam, Seul Ki, Kim, Kyu-Sung, Yoon, Sung Chun, Sohn, Keun-Yong, Kim, Mi-Rae, Song, Yong Sul, Park, Won-Wook

Metallic Glasses and Amorphous AlloysElectromagnetic wave absorption materialsMagnetic Properties of Alloys

Directly Determine an Additive-Induced Shift in Quasi-Fermi Level of TiO2Films in Dye-Sensitized Solar Cells

Shufang Zhang、Masatoshi Yanagida、Xudong Yang 等 4 位作者2012-10-01Japanese Journal of Applied Physics

The shifts in quasi-Fermi level (QFL) of TiO 2 films affected by additives are directly measured using three-electrode dye-sensitized solar cells (DSCs). The difference in QFL of TiO 2 under short circuit and open circuit are also analyzed. It is found that the QFL difference between the electrolyte side of the TiO 2…

TiO2 Photocatalysis and Solar CellsAdvanced Photocatalysis TechniquesTransition Metal Oxide Nanomaterials

Chiral Schiff base Ligated Dioxomolybdenum (VI) Complexes and their Asymmetric Catalytic Properties in the Epoxidation of Styrene

Yan Sui、Dongsheng Liu、Rong‐Hua Hu 等 4 位作者2012-10-01Journal of Chemical Research

Two series of Schiff base dioxomolybdenum (VI) complexes of the general formula [MoO 2 (L)(MeOH)] (L = D-glucosamine-derived Schiff base) have been synthesised, characterised and their asymmetric catalytic activities evaluated through the epoxidation of styrene. The molybdenum complexes with acetyl-protected D-glucosa…

Metal complexes synthesis and propertiesPolyoxometalates: Synthesis and ApplicationsMetalloenzymes and iron-sulfur proteins