Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
The effect of carbon black particle size and structure on the equilibrium volume swelling and elastic recovery of polychloroprene rubber immersed in hydraulic oil and subjected to uniaxial compression stress was investigated in this study.
The paper deals with the degradation phenomena produced on polypropylene films by corona discharges with streamers in air at different humidity levels. The attention is focused on the formation of crystals on the surface of these films. In the case of the thin films under consideration, these crystals appear in about…
The mechanical properties of a novel laminar composite made by tape casting have been studied. The composite consists of three layers in which an inner core of pure molybdenum disilicide (MoSi 2 ) is sandwiched between two layers of MoSi 2 reinforced with alumina platelets. Monolithic MoSi 2 exhibits poor room‐tempera…
Chloroaluminum phthalocyanine (ClAlPc) thin films, vacuum sublimed on SnO2-covered glass substrates, were exposed to KCl solutions of various pH values (from 2.0 to 8.0) in the fluid cell of an atomic force microscope (AFM). The evolution of the surface morphology of the film was followed in situ. Complementary experi…
All articles of this category New supramolecular ferrocene derivatives 9-16 have been produced from precursors synthesised from alumina-catalysed Knoevenagel reactions of ferrocenecarboxaldehyde. The UV-Vis spectra for each compound revealed solvatochromic behaviour, which augur well for these materials to display non…
A new method for fabricating analog light modulators on VLSI devices is described. The process is fully compatible with devices fabricated by commercial VLSI foundries, and the assembly of the modulator structures requires a small number of simple processing steps. The modulators are capable of analog amplitude or pha…
Six epoxy-based coating systems were tested for their resistance to degradation in the form of “cold-wall” blistering. The coatings were applied to type 1010 steel (UNS G10100) substrates and exposed to heated water for up to 10 months in Atlas test cells as a modified version of NACE Standard TM0174. The performance…
ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTMetal-Organic Chemical Vapor Deposition of Copper and Copper(I) Oxide: Kinetics and Reaction Mechanisms in the Presence of OxygenGuglielmo G. Condorelli, Graziella Malandrino, and Ignazio FragalaCite this: Chem. Mater. 1995, 7, 11, 2096–2103Publication Date (Print):November…
The overall performance of pentane blown rigid polyurethane foams in terms of insulation value and mechanical properties is demonstrated. The low vapor pressure of both normal-pentane and cyclopentane is shown to induce condensation effects. The consequences of condensation in terms of thermal conductivity and dimensi…
Abstract The Ramberg-Osgood strain-hardening exponents and coefficients are characterized for an unirradiated ASTM A302-B steel over a wide range of temperatures from −129 to 260°C. The strain-hardening exponent increases only slightly with temperature over this range, while the coefficient decreases with increasing t…
Abstract Several poly(acrylonitrile)‐g.co‐hydroxyethyl methacrylate graft copolymers were prepared using gamma irradiation ( 60 Co). The influences of the monomer concentration and the time of irradiation on the level of grafting were studied. Some of the graft copolymers obtained were characterised and used for the c…
The influence of chromium on homogeneity of gels and on mullite formation at 980°C was examined by DTA coupled with quadrupole mass spectrometry (QMS), X‐ray diffraction (XRD), and SEM, EDX, and TEM analyses. Mullite precursors were prepared according to the method which provides completelyhomogeneous gels in the Al 2…
ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTMetalloporphyrins with X[N2O2]- Ligands. Novel High-Spin (N-Phenyl-N-nitrosohydroxylaminato)(meso-tetraarylporphyrinato)iron(III)Geun-Bae Yi, Masood A. Khan, and George B. Richter-AddoCite this: Inorg. Chem. 1995, 34, 23, 5703–5704Publication Date (Print):November 1, 1995Pub…
We consider the system of a network formed by crosslinking a polymer blend. In such a system there is a competition between monomer-monomer interactions and elastic energy which may result in a microphase separation. We first treat the problem by adapting a model due to de Gennes to include the effect of concentration…
Young's moduli, creep properties, and time to failure under steady loads were measured for two types of alumina‐based single fibers. Microstructural changes during deformation (grain growth and cavitation) have been analyzed. Experimental dispersion has been correlated to fiber diameter scatter. It has been shown that…
Two types of smectic A and smectic C phases, respectively, have been proved by X-ray and DSC methods for compounds that are terminal non-polar, but consist of tuning-fork shaped molecules. The structural models of the phases are discussed on the basis of steric interaction and of a dense packing. The X-ray patterns of…
This paper presents a dynamic equivalent circuit model of solid magnetic cores for high frequency operations in power electronic circuits. The effects of eddy current, domain wall motion, and hysteresis are taken into account by distributed equivalent resistors and distributed nonideal differential inductors, respecti…
Two different solutions to the problem of simply supported conical shells under axial compression suggested by previous investigators are extensively compared and the problems associated with each type of solution are identified. In terms of buckling load, both solutions are in good agreement but significant differenc…
The thermal conductivity, heat capacity and heat generation properties of two poled piezoceramic materials, a "soft" PZT-5H and a "hard" PZT-4S, were measured over the temperature range from 20 K to above 150 K. A single sample was used for each test type. The thermal conductivity (in the poling direction) of PZT-5H i…
Shock wave processing of Ti-SiC powders has been numerically analyzed at the particle level using an Eulerian finite-element methodology. The analysis reveals that the shock consolidation is dominated by the viscoplastic deformation of Ti particles and that inertia plays a significant role in setting the magnitude of…