Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
This paper elucidates the structural and electrical properties of Bi4Ti3O12 (BIT), Bi3.25Nd0.75Ti3O12 (BNT075) and Bi3.25La0.75Ti3O12 (BLT075) compounds that were primarily prepared by a novel combustion route at temperature as low as 300°C. Single crystalline phase of bismuth-layered perovskite structure was obtained…
We present field emission properties of CNT line emitters fabricated by a unique method. Two dimensional electron beam sheet was achieved by the line emitters. The CNT line emitters exhibited high emission current density over 10.7 A/cm2at the electric field of 2.8 V/μm and excellent emission stability during 24 hr. M…
Luminescent Y 1.74 Eu 0.16 Bi 0.1 O 3 films have been obtained by extraction pyrolytic method. The formation of a crystalline structure in the film upon isothermal annealing in air at 600–650°C was established by X-ray diffraction. Single-phase Y 1.74 Eu 0.16 Bi 0.1 O 3 films begin to exhibit luminescent properties af…
A new buffering layer(nickle oxide thin film) of organic solar cells was presented. The device strcture is Anode/NiO/P3HT[regioregular of poly(3-hexylthiophene)]: PCBM[(6,6)-phenyl C61 butyric acid methyl ester] /Al. Nickle Oxide(NiO) thin film is a good alternative of hole tansporting layer. We investigates the film…
Summary form only given. There has been a recent resurgence of interest in the development of high power microwave and terahertz (THz) sources and amplifiers. High power microwave and THz amplifiers have the potential to vastly improve a number of applications: high data rate communications, concealed weapon and threa…
Extended abstract of a paper presented at Microscopy and Microanalysis 2012 in Phoenix, Arizona, USA, July 29 – August 2, 2012.
Abstract Um neue metallische Werkstoffe mit besseren Eigenschaften zu entwickeln, ist Strukturierung auf kleinster Skala notwendig. Material‐ und Naturwissenschaftler kombinieren dafür ihre Methoden — und bereiten so innovativen Anwendungen in der Mikrosystemtechnik den Weg.
The nature of carrier traps in polyester (PET) and polyethylene (PE) has been widely investigated by respectively using thermally stimulated current (TSC) and photo-stimulated discharge (PSD). Under non-isothermal technology, the trap depths of Polyester sample for the TSC peaks were about 0.50eV, for the PSD peaks we…
For many years, titanium has been used as the main biomaterials in dental implant and despite the high success rate of its surgery, there have been still reports of failure due to inadequate bonding of titanium implant metal with surrounding bone. Hence, many researches have been carried out to solve this problem, oft…
Summary form only given. TiO2nanotubes are biocompatible and many studies have been carried out for their biotechnological applications, especially in relation to drug carriers. The purpose of this study is to apply TiO2film on the variety of metal substrates that could be used as biomaterials, and by forming various…
Summary form only given. Nonlinear optical properties and photoluminescence behavior of Tin-doped indium oxide (In2O3:Sn) thin films layers were investigate in detail. On heated glass substrates, we deposited these layers at different temperatures 400°C, 450°C and 500°C and different doping agent percentage, by the so…
Particle growth has been a subject to many different investigations. Besides industrial interests also the fundamental processes are being studied. It has been found, that particle growth can be divided into three stages: nucleation, coagulation and accretion [1].
Extended abstract of a paper presented at Microscopy and Microanalysis 2012 in Phoenix, Arizona, USA, July 29 – August 2, 2012.
Extended abstract of a paper presented at Microscopy and Microanalysis 2012 in Phoenix, Arizona, USA, July 29 – August 2, 2012.
Quasi-3D helix metamaterial is constructed from multilayered 2D spiral structure with capacitive coupling between the adjacent layers. The sample is implemented with PCB, and linearly polarized microwave source is used in the measurement. The polarization plane is rotated to the opposite directions with left- and righ…
In this study, sulphur dye was used for dyeing 100% cotton knitted fabric and the effect of dye concentration and colour shade on ultraviolet protection factor (UPF) was discussed. The results indicated that the UVR absorbency of sulphur dye was not satisfactory. Generally speaking, the higher the dye concentration, t…
The dependence of the rate and final height of the electron beam deposited platinum on the control parameters were studied by varying electron probe current density (PCD), accelerating voltage and deposition time.
Four di-cyanoethyl azo disperse dyes based on N,N-bis(2-cyanoethyl)-m-methylaniline were synthesized using four different heterocyclic aromatic amines as the diazo components. They were characterized by UV-Vis, IR, 1HNMR, MS and EA. The dyeing performance of these dyes were assessed on polyester, fir powder, and acety…
Multiferroic solid solutions between Pb(Fe2/3W1/3)O3(PFW) and PbTiO3(PT) [PFW-PT] have been characterized by anelastic measurements. Anomalies in the temperature dependence of the elastic constants have been observed at TNand TCfor all samples, indicating that the magnetoelectric coupling (ME) between the ferroelectri…
The specification for liquid dielectric has undergone changes over the years. Conventionally used mineral oil based on acid-clay treatment has been changed to hydrocraking/iso dewaxing/ hydrofinishing combinations. The power equipment being a precious system in the power system network, needs to be assured for its rel…