Materials Literature

文献浏览

按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。

清除
第 248523 / 280014 页 · 当前展示 4,970,441–4,970,460 / 5,600,273 条匹配结果 · 摘要仅作预览

Optimization of the Two Parameters of Classical Blaze Grating in Littrow Mount

Shan Wen Zhang、Jian Xin Ying2012-06-14Advanced materials research

On the base of electromagnetic theory of gratings, we analyse the effects of both of two important parameters of classical blaze grating in Littrow mount to diffraction efficiency, and the two parameters are optimized for obtaining highest diffraction efficiency. It is presented that not only blaze angle but apex angl…

Optical Coatings and GratingsOptical Systems and Laser TechnologyAdvanced Measurement and Detection Methods

Development of the continuous process method for ECAP using a tri-axis rotary die and microstructural evolution of semi-solid aluminium alloy

Keiko Natori、Fumiya Nomura、Yoshihiko Arao 等 4 位作者2012-06-14WIT transactions on the built environment

The continuous ECAP process which can provide three-dimensional strain was developed in this study. A die with tri-axis crossed channels having channel angle of 90 and curvature of 0 was created. As a result, continuous ECAP process via route Bc for AC4CH aluminium semi-solid alloy could be performed at 573K at pressi…

Advanced ceramic materials synthesisAluminum Alloys Composites PropertiesElectrophoretic Deposition in Materials Science

Effect of Modification of Coal Powder Using Silane Coupling Agent on Mechanical Properties of SBS

Guo Jun Cheng、Xiu Hua Yu、Zhong Tang2012-06-14Advanced materials research

Coupling agent γ-methacryloxypropyltrimethoxysilane(KH-570) was used as modifier to improve the superficial capacity of coal powder. Modified coal powder/thermoplastic butadiene-styrene rubber (SBS) composites were prepared by mixing procedure. The modified and unmodified coal powder and mechanical properties of compo…

Carbon Nanotubes in CompositesPolymer Nanocomposites and PropertiesFiber-reinforced polymer composites

Structure and Performance of YSZ Thermal Barrier Coatings Irradiated by High Intensity Pulsed Ion Beam

Xian Xiu Mei、Yue Liu、Xue Ma 等 4 位作者2012-06-14Advanced materials research

The thermal barrier coatings (TBC) of the yttria-stabilized zirconia (YSZ) has been deposited by the atmospheric plasma spraying (APS),followed by the irradiation of high intensity pulsed ion beam (HIPIB) with the voltage of 250 KV and the ion current density of 300 A/cm2 and pulsed times of 2, 5, 10 and 20, respectiv…

High-Temperature Coating BehaviorsNuclear Materials and PropertiesNuclear materials and radiation effects

Study on Present Situation and New Trends of the Electrodeposition of Nickel-Cobalt Alloy

Ming Yu、Hong You Li、Yi Wang2012-06-14Advanced materials research

Nickel-cobalt alloys have broad application prospect for their excellent properties (i.e. high microhardness, strength, abrasion, corrosion resistance and magnetic properties.etc). Present situation and new trends on mechanism of the anomalous codeposition and technology of electrodepostion of nickel-cobalt were studi…

Corrosion Behavior and InhibitionHydrogen embrittlement and corrosion behaviors in metalsElectrodeposition and Electroless Coatings

Oligomeric Pseudorotaxanes Adopting Infinite‐Chain Lattice Superstructures

Zhixue Zhu、Hao Li、Zhichang Liu 等 10 位作者2012-06-14Angewandte Chemie

Nur eine Illusion: Oberhalb einer kritischen Kettenlänge, bei Oligomeren mit fünf oder mehr Erkennungseinheiten, werden im Festkörper scheinbar endlose Donor-Akzeptor-Polypseudorotaxane gebildet (siehe Bild). Röntgenstrukturanalysen dreier Kristalle zeigen, dass die oligomeren Ketten zwar eindeutig diskret und monodis…

Metal-Organic Frameworks: Synthesis and ApplicationsSupramolecular Chemistry and ComplexesSupramolecular Self-Assembly in Materials

Pentaguanidinium monohydrogendiphosphopentamolybdate(VI) 2.5-hydrate, (CH6N3)5[HP2Mo5O23]·2.5H2O: hydrogen bonding and π-stacking in guanidinium cations

Pietro Di Tondo、Robin G. Pritchard2012-06-14Acta Crystallographica Section C Crystal Structure Communications

The asymmetric unit of the title compound consists of two crystallographically independent, but structurally identical, [HP(2)Mo(5)O(23)](5-) anions, ten guanidinium cations and five water molecules. Each singly protonated diphosphopentamolybdate(VI) anion retains the typical geometry of a ring of five edge-sharing Mo…

Metal-Organic Frameworks: Synthesis and ApplicationsPolyoxometalates: Synthesis and ApplicationsChemical Synthesis and Characterization

Study on the Mechanical Property and Microstructure of Surgical Implanted Ti-6Al-7Nb Titanium Alloy

Jiang Bo Wang、Zai Yan Shang、Zhi Shan Yuan 等 7 位作者2012-06-14Advanced materials research

Ti-6Al-7Nb titanium alloy is attractive to medical device industry for orthopedic applications, such as total hip replacement systems, fracture fixation plates, intermedullary rods and nails, spinal devices, screws, and wires. Substituting Niobium for Vanadium as the beta stabilizing element, Ti-6Al-7Nb titanium alloy…

Orthopaedic implants and arthroplastyTitanium Alloys Microstructure and PropertiesAdvanced materials and composites

Throughput analysis of shared-memory crosspoint buffered packet switches

Ziqian Dong、Roberto Rojas‐Cessa2012-06-14IET Communications

This study presents a theoretical throughput analysis of two buffered-crossbar switches, called shared-memory crosspoint buffered (SMCB) switches, in which crosspoint buffers are shared by two or more inputs. In one of the switches, the shared-crosspoint buffers are dynamically partitioned and assigned to the sharing…

Advancements in Battery MaterialsSupercapacitor Materials and FabricationInterconnection Networks and Systems

Unexpected Low‐Temperature Behaviour of Piroxicam Monohydrate

Katharina Fucke、Alison J. Edwards、Michael R. Probert 等 6 位作者2012-06-14ChemPhysChem

Cool runnings: Upon cooling the monohydrate of the anti-inflammatory drug piroxicam shows reversible splitting (see picture). The cell also shows an irregular contraction over temperature and has a memory effect of its thermal history. This is due to strongly hydrogen bonded chains present in the monohydrate, which al…

High-pressure geophysics and materialsSolid-state spectroscopy and crystallographyThermal Expansion and Ionic Conductivity

Back-Side Thinning of Silicon Carbide Wafer by Plasma Etching Using Atmospheric-Pressure Plasma

Yasuhisa Sano、Kohei Aida、Hiroaki Nishikawa 等 6 位作者2012-06-14Key engineering materials

Silicon carbide (SiC) power devices have received much attention in recent years because they enable the fabrication of devices with low power consumption. To reduce the on-resistance in vertical power transistors, back-side thinning is required after device processing. However, it is difficult to thin a SiC wafer wit…

Advanced ceramic materials synthesisSilicon Carbide Semiconductor TechnologiesAdvanced Surface Polishing Techniques

Experimental Study on Rock Breaking with Impacting Water Jet by Modulation of Chaos

Chang Tian、Cheng Xue、Wei Wang2012-06-14Advanced materials research

The experiment focused on the contrast with rock breaking effect of impacting water jet by modulation of chaos and common cavitation jet. Investigated the influences of various water jet parameters and conditions on rock breaking, such as standoff distance, pump pressure, transverse speed and erosion time and the mass…

High-Velocity Impact and Material BehaviorErosion and Abrasive Machining

DEFORMATION ANALYSIS OF RAILGUN CROSS –SECTION

P. Gildutis、Rimantas Kačianauskas、Markus Schneider 等 5 位作者2012-06-14Mechanika

This paper presents the first results in a series of research efforts aiming to perform numerical modelling of the electromagnetic gun RAFIRA (RApid FIre RAilgun) of the French-German Research Institute of Saint-Louis (ISL). It deals with the understanding and the illustration of cross-sectional deformation behaviour.…

Energetic Materials and CombustionHigh-Velocity Impact and Material BehaviorElectromagnetic Launch and Propulsion Technology

Reconstitution of the B12 Macrocycle by Radical Ring Closure of a Blue Secocorrin

Markus Ruetz、Sergey N. Fedosov、Bernhard Kräutler2012-06-14Angewandte Chemie International Edition

A radical B12 synthesis: A recently described blue 7,8-secocorrinoid, a degradation product of vitamin B12, has a remarkable structural predisposition for ring closure. Reductive reconstitution of the corrin macrocycle by means of a stereospecific radical reaction leads to a 7-epicobalamin. Human B12-binding proteins…

Folate and B Vitamins ResearchPorphyrin and Phthalocyanine ChemistryPorphyrin Metabolism and Disorders

The Influence of Electrode Materials on the Electrical Degradation Process of Lead Zirconate Titanate under Harsh Operating Environment

De Yi Zheng、J. Swingler、Paul M. Weaver2012-06-14Advanced materials research

Piezoelectric materials because their special ability to convert bwteen kinetic energy and electrical energy. Therefore, they are widely applicated in the areas such as sensors, resonators etc. However, the electrical degradation phenomenon of piezoelectric materials will cause the degradation of their performance. Th…

Ferroelectric and Piezoelectric MaterialsAdvanced Sensor and Energy Harvesting MaterialsAcoustic Wave Resonator Technologies

Studies on the Thermal Conductivity of Al2O3/Epoxy Resin Composite Materials

Xiao Hu Wan、Li Ge Wang、Bin Zuo 等 5 位作者2012-06-14Advanced materials research

Al2O3/epoxy resin composite materials were prepared with alumina as filler in this paper, and the effects of particle size and added quantity of Al2O3 powers on the thermal conductivity of the composites have been investigated. The results show that, thermal conductivity of the composites increases with the increase o…

Epoxy Resin Curing ProcessesThermal properties of materialsAerogels and thermal insulation

Star Polymers of Sodium Styrenesulfonate Prepared by One-Pot TEMPO-Controlled SFRP

Jianfu Ding、Steven Holdcroft2012-06-14Australian Journal of Chemistry

Star polymers of sodium styrenesulfonate with controlled arm length were prepared in a one-pot polymerization. Sodium styrenesulfonate was first polymerized with controlled molecular weight and narrow polydispersity by stable free radical polymerization. Poly(sodium styrenesulfonate) was terminated with divinyl benzen…

Advanced Polymer Synthesis and CharacterizationFuel Cells and Related Materialsbiodegradable polymer synthesis and properties

Properties of High Solid Content UV Curable Waterborne Polyurethane Dispersions with Different C=C Content

Yong Bin Jiu、Xin Zeng、Jun Ji 等 5 位作者2012-06-14Advanced materials research

Ultraviolet (UV) curable waterborne polyurethane(WPU) dispersions based on isophorone diisocyanate(IPDI), polypropylene glycol(PPG), dimethylolproprionic acid(DMPA) and pentaerythritol triacrylate(PETA) were prepared by the conventional method of anionic aqueous polyurethane dispersions. The structure of the ultraviol…

Advanced Polymer Synthesis and CharacterizationPolymer composites and self-healingPhotopolymerization techniques and applications

Effect of Cr and Ni Contents on Microstructure and Properties of High Boron Stainless Steel Composite Plate

Jing Liu、Ke Zhang、Guo Liang Xie2012-06-14Advanced materials research

Two high boron alloyed stainless steel composite plates(HBASSCP) which have different Cr and Ni contents were prepared by composite casting and hot rolling process. By means of metallographic observation and x-ray diffraction analysis, the matrix microstructure of calding and core is ferrite and the boride phase in co…

Fusion materials and technologiesGraphite, nuclear technology, radiation studiesNuclear and radioactivity studies

Preparation and Characterization of the Hydrophilic Copolyester

Qiong Wang、Chao Sheng Wang、Hua Ping Wang 等 5 位作者2012-06-14Advanced materials research

A series of hydrophilic copolyesters were prepared via copolymerization method with purified terephthalic acid (PTA), ethylene glycol (EG), 5-sodium suflo bis-(hydroxyethyl) isophthalate (SIPE) as the third monomer, and different content of polyols (FMA01) as the fourth monomer. The chemical structures of the hydrophi…

Advanced Polymer Synthesis and Characterizationbiodegradable polymer synthesis and propertiesSynthesis and properties of polymers