Kristi L. Griffiths2007-09-01Transactions of the IMF
Polyamides were one of the earliest powder coatings invented for metal protection and soon established recognition for their physical toughness, visual attractiveness and compatibility with potable water and foodstuffs. The available polyamides today can be derivatives from both crude oil and castor oil refining proce…
Material Properties and Applications
N. M. Olekhnovich2007-09-01Crystallography Reports
The dependence of the strain energy of anion-cation bonds on the sum Ψ2 of squares of the angles of ordered rotations of octahedra around the coordinate axes of the reduced cell has been determined for ABX 3 compounds with perovskite structure in the two-particle approximation. A relation determining the change in the…
High-pressure geophysics and materialsCrystal Structures and PropertiesSolid-state spectroscopy and crystallography
S. S. Glazkov2007-09-01Russian Journal of Applied Chemistry
A thermodynamic approach to predicting the compatibility of the binder with the filler by calculating the nonpolar and acid-base parameters of the filler and polymeric matrix was considered. The calculated adhesion stabilities of the composite systems are consistent with the structural and functional features of their…
Polymer Nanocomposites and PropertiesEpoxy Resin Curing ProcessesMaterial Properties and Applications
Eduardo Alcaraz Mateos、Vicente L. Cebolla、Luis Membrado 等 5 位作者2007-09-01Journal of Chromatographic Science
Gel permeation chromatography with differential refractometry is used to obtain molecular weight distributions (MWD) of poly-(epsilon-caprolactams). Elution is carried out using an m-cresolchlorobenzene mixture (50:50, v/v) at 50 degrees C. MW values are obtained by a Hamielec-based calibration method, using broad-MWD…
biodegradable polymer synthesis and properties
Lawrence J. Sacks2007-09-01Journal of Chemical Education
The author offers counterpoint commentary in response to Shaffer's suggestion that the Lewis acid–base approach be applied to reactions such as ammonia–water and HCl–water.
Porphyrin and Phthalocyanine ChemistryPhotochemistry and Electron Transfer StudiesVarious Chemistry Research Topics
Azita Asayesh、Mohammad Maroufi2007-09-01OpenAlex
The effect of yarn twist on the wicking rate of cotton interlock weft knitted fabrics has been studied. It is observed that using the yarn linear density of 30tex, the wicking rate decreases with an increase in the amount of yarn twist. An equation ‘h=cT+d’ is found to be a good estimate of the maximum wicking height…
Textile materials and evaluationsStructural Analysis and OptimizationVibration and Dynamic Analysis
In‐Chul Hwang、Kwang Ha2007-09-01Zeitschrift für Kristallographie - New Crystal Structures
Article Crystal structure of bis(2,2′-bipyridine-N,N′)dibromomanganese(II), MnBr2(C10H8N2)2 was published on September 1, 2007 in the journal Zeitschrift für Kristallographie - New Crystal Structures (volume 222, issue 3).
Magnetism in coordination complexes
Yu‐Fen Huang、Kuan-Ming Huang、Huan‐Tsung Chang2007-09-01Journal of Nanoscience and Nanotechnology
This paper describes how irradiation with light influences the preparation of Au-Ag-Hg trimetallic nanoparticles (NPs) from gold nanorods (AuNRs) in glycine solutions (pH 8.5-10.5). Silver, gold, and mercury ions were reduced by ascorbic acid and deposited on AuNRs to form Au-Ag-Hg trimetallic NPs of different sizes a…
Nanoparticles: synthesis and applicationsGold and Silver Nanoparticles Synthesis and ApplicationsMercury impact and mitigation studies
Г. А. Коваленко、O. V. Komova、Т. В. Чуенко 等 5 位作者2007-09-01Kinetics and Catalysis
The synthesis of catalytic filamentous carbon (CFC) on a Ni catalyst supported by homogeneous precipitation onto the surface of aluminosilicate ceramic supports (honeycomb monoliths, ceramic foam, glass foam, and haydite) was studied. The effects of CFC synthesis conditions (the catalyst concentration on a support, th…
Carbon Nanotubes in CompositesGraphene research and applicationsSupercapacitor Materials and Fabrication
Sebastian Sinnwell、Helmut Ritter2007-09-01Journal of Macromolecular Science Part A
The ring‐opening polymerization (ROP) of ϵ‐caprolactone (CL) using γ‐hydroxy‐α‐methylenebutyric acid (HMBA) as the initiator was studied. The use of stannous octoate (Sn(Oct)2) and Novozym 435 (Lipase B from Candida Antarctica) as catalysts was compared. Under enzymatic conditions, poly(ϵ‐caprolactone) (PCL) with well…
Advanced Polymer Synthesis and Characterizationbiodegradable polymer synthesis and propertiesCarbon dioxide utilization in catalysis
K. Y. Hakobyan、Hong Yong Sohn、A. K. Hakobyan 等 6 位作者2007-09-01Mineral Processing and Extractive Metallurgy Transactions of the Institutions of Mining and Metallurgy Section C
The oxidation of molybdenum sulphide concentrate by water vapour at high temperatures has been investigated experimentally. The progress of the reaction was followed by a thermogravimetric analysis unit and the exit gas was analysed to determine its composition. The conditions under which the water vapour oxidation pr…
Catalytic Processes in Materials ScienceCatalysis and Hydrodesulfurization StudiesCatalysis and Oxidation Reactions
Xavier Colin、L. Audouin、J. Verdú2007-09-01Rubber Chemistry and Technology
Abstract The thermal oxidation of an unvulcanized, unstabilized polyisoprene rubber (IR) has been studied in the 40–140 °C temperature range. Ageing was monitored by FTIR determination of double bonds and carbonyl groups, mass uptake measurement, and weight average molar mass determination. A mechanistic scheme based…
Polymer crystallization and propertiesPolymer Nanocomposites and PropertiesSynthesis and properties of polymers
Sean Gavin、M. Abdel-Aziz2007-09-01Brazilian Journal of Physics
Measurements of transverse momentum fluctuations can be used to determine the shear viscosity [1]. We use current data to estimate the viscosity-to-entropy ratio in the range from 0.08 to 0.3, and discuss how future measurements can reduce this uncertainty.
Phase Equilibria and ThermodynamicsMaterial Dynamics and PropertiesAdvanced Thermodynamics and Statistical Mechanics
Dennis D. Keiser、James I. Cole2007-09-01University of North Texas Digital Library (University of North Texas)
Metallic nuclear fuels are being looked at as part of the Global Nuclear Energy Program for transmuting longlive transuranic actinide isotopes contained in spent nuclear fuel into shorter-lived fission products. In order to optimize the performance of these fuels, the concept of using liners to eliminate the fuel/clad…
Intermetallics and Advanced Alloy PropertiesAdvanced materials and compositesMetallurgical and Alloy Processes
Sunil K. Sharma、N. K. Saxena2007-09-01Journal of Fire Sciences
Polyvinyl chloride (PVC) is one of the most widely used polymers today. One of its major applications is in electrical and control cables. Although PVC is intrinsically self-extinguishing, it supports flame spread along its length because of the additives used during processing. The spread of fire along electrical cab…
Fire dynamics and safety researchFlame retardant materials and propertiesEnvironmental and Industrial Safety
Alberto Pérez‐Huerta、Jennifer England、Maggie Cusack2007-09-01Earth and Environmental Science Transactions of the Royal Society of Edinburgh
ABSTRACT Electron backscatter diffraction (EBSD) is used to determine the detailed crystallographic orientation of calcite crystals of craniid brachiopods in the context of shell ultrastructure. Sections of shells of two Recent species, Novocrania anomala and Novocrania huttoni , are analysed to provide 3D crystallogr…
Paleontology and Stratigraphy of FossilsCalcium Carbonate Crystallization and Inhibition
I. V. Stroganov、V. F. Stroganov2007-09-01Polymer Science Series C
Peculiarities of the synthesis of crosslinked epoxyurethane polymers prepared by two main reactions such as “cyclic carbonate-amine” with the formation of linear hydroxyurethane fragments and “epoxide-diamine” to form crosslinked polymer are considered. It is shown that the acidolysis of cyclic carbonate proceeds by t…
Synthesis and properties of polymers
Mohammad Sheikhzadeh、Seyedrasoul Hosseini、M Darvishzadeh2007-09-01OpenAlex
The relationship between the ratio of the applied force on warp yarn by backrest roller to the warp tension, and the radius of backrest roller, the vertical position of backrest roller and the horizontal position of backrest roller with variations in warp beam radius during weaving process has been studied. The optimu…
Textile materials and evaluationsVibration and Dynamic Analysis
SUHEY TORRES、G. Neculqueo、Francisco Martínez2007-09-01Journal of the Chilean Chemical Society
In this paper, we report the electrochemical polymerization of 3-decylthiophene at room temperature using the 1-butyl-3-methylimidazoliumtetrafluorborate as solvent. The polymer film is electroactive and its morphology depends upon the anode used. The polymerized 3-decylthiophene was characterized by ft-infrared, uv-v…
Electrochemical sensors and biosensorsConducting polymers and applicationsAnalytical Chemistry and Sensors
А. А. Назаров、Mao S. Wu、Hong Zhou2007-09-01The Physics of Metals and Metallography
Crack formation in a nickel bicrystal wire of radius 16 nm with a negative junction disclination lying along the axis has been studied by computer simulation. It has been revealed that at a disclination strength exceeding some critical value (approximately 17°), a crack is formed in the region of the disclination core…
Microstructure and mechanical propertiesnanoparticles nucleation surface interactionsMaterial Properties and Failure Mechanisms