Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
In order to improve the tracking and erosion performance of outdoor polymeric silicone rubber (SR) insulators used in HV power transmission lines, micron sized inorganic fillers are usually added to the base SR matrix. In addition, insulators used in high voltage dc transmission lines are designed to have increased cr…
Corrosion inhibition of carbon steel in normal hydrochloric acid solution at 30°C by new pirydazine derivative, namely 3,6-bis (3-pyridyl) pyridazine (3-PYP) has been studied by a series of known techniques such as weight loss, polarisation and electrochemical impedance spectroscopy (EIS). The experimental results hav…
BACKGROUND: Realizing the therapeutic benefits of quercetin is mostly hampered by its low water solubility and poor absorption. In light of the advantages of nanovehicles in the delivery of flavanoids, we aimed to deliver quercetin perorally with nanomicelles made from the diblock copolymer, polyethylene glycol (PEG)-…
Thermal conductivity of one-dimensional nanostructures, such as nanowires, nanotubes, and polymer chains, is of significant interest for understanding nanoscale thermal transport phenomena as well as for practical applications in nanoelectronics, energy conversion, and thermal management. Various techniques have been…
An effort is made to determine theoretically the new rheological properties of a rheologically defined non-Newtonian fluid as a result of the addition of particles in the original fluid. A theoretical model is proposed to determine the rheological properties of a dilute suspension of infinite-length round particles fo…
A high torque vane rheometer is used to measure the yields stress of cement-based materials. It is shown that this apparatus is suitable for the evaluation of the yield stress of various concretes and mortars in the fresh state in comparison with slump tests realized with ASTM Abrams cone. Then, the rheological proper…
A wedge-shaped copper mold was used to fabricate micro quasicrystals(QCs). Stable Mg-Zn-Y-based nano-QCs were directly synthesized through this simple route instead of crystallization from metallic glasses or complicated forming processes at high temperature. The study showed that on the tips of the wedge-shaped ingot…
Steel bar embedded in an alkali-activated slag (AAS) concrete was tested under complete immersion, in 3.5% NaCl solution by weight of the slag. Ordinary Portland cement (OPC) was also tested for comparative purposes and exposed to the same solution. Monitoring of open-circuit potential, polarization resistance measure…
The applications of the chromium ferritic stainless steel AISI 410S have been considerably increased in the last years in many technical fields as chemical industries and oil or gas transportation. However, the phase transformation temperatures are, currently, unknown for this alloy. The aim of this work is to determi…
This paper shows theoretical models (analytical formulations) to predict the mechanical behavior of thick composite tubes and how some parameters can influence this behavior. Thus, firstly, it was developed the analytical formulations for a pressurized tube made of composite material with a single thick ply and only o…
Colloidal processing of ceramics offers a high potential to achieve homogeneous microstructures with improved material properties. In this study, a novel forming method is investigated, which was already applied successfully for the fabrication of ceramic matrix composites (CMC), but is also considered to be a suitabl…
The processing of 3% Si steel is characterized by the use of MnS particles as a normal grain growth inhibitor. Experiments were carried out to investigate the grain growth in this material during heat treatments at low temperature. Industrial decarburized samples were annealed in the range 825-845 °C and a detailed st…
Hydroxyapatite-collagen (HA/Col) composites are potential scaffolds for bone tissue engineering. In this work, three-dimensional (3-D) HA/Col (50/50 wt. (%)) scaffolds were synthesized using a self-assembly method and cross-linked with a 0.125% glutaraldehyde solution. Scaffolds were evaluated in vitro by cytotoxicity…
This study evaluated the effect of artificially accelerated aging (AAA) on the surface hardness of eight composite resins: Filtek Z250, Filtek Supreme, 4 Seasons, Herculite, P60, Tetric Ceram, Charisma, and Filtek Z100. Sixteen specimens were made from the test piece of each material, using an 8.0 × 2.0 mm teflon matr…
The present study investigated the Ti-46Al-4Nb-2Mo and Ti-46Al-4Nb-2Cr (at.%) alloys, which were prepared by solution treatment at 1,400 °C for 30 minutes prior to being air-cooled. The alloys were subsequently reheated to 1350 °C for 60 minutes and were cooled to room temperature by oil or water quenching. The evolut…
Single crystalline Ca2Ge7O16 nanowires have been synthesized using CaO and GeO2 as the raw materials. Various factors that affect the formation and size of the Ca2Ge7O16 nanowires have been analyzed. The obtained products are characterized by X-ray diffraction, transmission electron microscopy and scanning electron mi…
Cu (II) removal equilibrium from aqueous solutions using calcined clays "Bofe" and "Verde-lodo" has been studied by batch and fixed-bed in static and dynamic systems, respectively. Analyses were performed for physicochemical characterization of clays using the techniques: X-ray fluorescence (XRF), thermogravimetry (TG…
A 7.4 mm thick strip of 3003 aluminum alloy produced by the industrial twin-roll casting (TRC) process was homogenized at 500 °C for 12 hours, after which it was cold rolled in two conditions: 1) to reduce the strip's thickness by 67%, and 2) to reduce it by 91%. The alloy was annealed at 400 °C for 1 hour in both con…
The main goal in this work is to conduct a quantitative analysis of the mechanical stir casting process for obtaining particulate metal matrix composites. A combined route of stirring at semi-solid state followed by stirring at liquid state is proposed. A fractional factorial design was developed to investigate the in…
A combined chemical-electrochemical oxidation method to obtain porous bioactive TiO2 films on titanium is reported. In this case, a titanium chemical pre-etching followed by the micro-arc oxidation (MAO) treatment is proposed and optimized, to obtain a high-roughness and porous surface which benefits the titanium/bone…