Qian Jian-qin2012-01-01Journal of Anhui Vocational College of Metallurgy and Technology
The effect of pre-recrystallization on microstructure and property of cold-rolled dual phase steel was studied through experimental.The recrystallization temperature and time were identified as 700℃ and 30s,by the evolution of recrystallization;the parameters of intercritical anneal processing were determined from the…
Microstructure and Mechanical Properties of SteelsMetallurgy and Material FormingMetal Alloys Wear and Properties
Gao Zhenzhou2012-01-01Bandaoti guangdian
The textured structure on multi-crystalline silicon was fabricated by low-temperature acid etching method with optimized ratio and technical parameters in HF-HNO3-H2O system,and the surface morphology and reflectivity property of samples were characterized by scanning electron microscope(SEM) and incident-photon-to-el…
Thin-Film Transistor TechnologiesSilicon and Solar Cell TechnologiesSilicon Nanostructures and Photoluminescence
Xinhai Yu2012-01-01Adhesion
The research status of wateraborne polyimide at home and abroad was reviewed.The synehetic principle and technological approaches were analysised emphatically.Its applications in adhesives,photoresists,paints and enamels were introduced.
Synthesis and properties of polymersSilicone and Siloxane Chemistry
Dong Liu2012-01-01Metal Materials and Metallurgy Engineering
The microstructure and hardness analysis of TiC high manganese steel bonded carbide were investigated by optical microstructure,X-ray diffractrometry,transmission electron microscope and Rockwell hardness testing.The results show that the TiC steel bonded carbide is composed by granular carbide and austenite phase.The…
Advanced materials and compositesMetal Alloys Wear and PropertiesPowder Metallurgy Techniques and Materials
Bo Qu2012-01-01Bandaoti guangdian
To study the effect of BCP on organic solar cell,a bulk heterojunction battery containing BCP layer was prepared.The battery has the structure as ITO/PEDOT:PSS/P3HT+PCBM/BCP/LiF/Al.Experimental results indicate that BCP layer has the effect of hole blocking and electron transport.The property of the cell varies with t…
Conducting polymers and applications
Zheng Jian2012-01-01OpenAlex
Manganese substituted potassium hexaaluminate catalyst was prepared by co-precipitation method,sol-gel method and reverse microemulsion-mediated method.The title catalyst was calcined at 1 200 ℃ and characterized by XRD and TG-DTA techniques.The catalytic activity was evaluated for methane combustion.The specific surf…
Catalytic Processes in Materials ScienceZeolite Catalysis and SynthesisCatalysis and Oxidation Reactions
Jianyong Chen2012-01-01Textile Research Journal
Owing to special channels of mesoporous silica SBA-15,a novel silver-supported mesoporous silica antibacterial agent(Ag/SBA-15) was synthesized by one-step method with adding Ag into the process of preparing mesoporous carrier.Ag/SBA-15 structure was characterized by X-ray diffraction(XRD),transmission electron micros…
Nanoparticle-Based Drug DeliveryMesoporous Materials and CatalysisAdvanced Nanomaterials in Catalysis
Jing Bai2012-01-01New Technology & New Process
Static characteristics of blades under six different restraint conditions were calculated by ANSYS software,taking the blades of axial compressor as the subject of the research.The stress and deformation regularity of distribution were obtained..The results of the study indicated that different constraint has no signi…
Material Properties and ApplicationsMechanical and Thermal Properties AnalysisMechanical Systems and Engineering
MA Ke-jia2012-01-01Journal of Jilin Institute of Chemical Technology
A novel Keggin-type supramolecular compound,[Cu2(phen)4(SiMo12O40)](1),has been synthesized under hydrothermal conditions and characterized by elemental analysis,IR and single crystal X-ray diffraction.It crystallizes in the triclinic system,space group P21/c,a= 1.303 2(3)nm,b=1.152 2(2)nm,c=2.340 8(8)nm,β=108.29(3)°,…
Metal-Organic Frameworks: Synthesis and ApplicationsPolyoxometalates: Synthesis and ApplicationsAdvanced Nanomaterials in Catalysis
Jianhua Liu2012-01-01Fudan xuebao. Ziran Kexue ban
β-PbO2 electrode on stainless steel were prepared in Pb(NO3)2 plating solution adding Mn(NO3)2 by DC deposition.SEM,XRD and linear sweep voltammetry(LSV) were used for the analysis of the surface structure,phase composition and the catalytic activity of oxygen evolution potential analysis.The results show that as the…
Conducting polymers and applicationsElectrochemical Analysis and Applications
XU Shi-chuan2012-01-01Tire Industry
The thermo-oxidative aging resistance,anti-reversion characteristic and ozone aging resistance of antioxidant DDA were experimentally investigated and compared to common antioxidants.The results showed that DDA possessed excellent anti-reversion characteristic and ozone aging resis-tance.DDA showed dual effect of agin…
Dyeing and Modifying Textile FibersSynthesis and properties of polymersSilicone and Siloxane Chemistry
IT Electronics2012-01-01OpenAlex
Methanol fuel is recognized as a substitute fuel.Based on the comparison of the properties of methanol and pure gasoline,the paper analyzes the advantage and development trend of Methanol gasoline alternative fuel,and the Security of Methanol gasoline.This paper introduces the application and study of methanol gasolin…
Advanced Combustion Engine TechnologiesCatalytic Processes in Materials ScienceBiodiesel Production and Applications
Zhan Huai-yu2012-01-01Fain kemikaru
Hydroxypropyl methylcellulose acetate succinate(HPMCAS) was successfully synthesized from hydroxypropyl methylcellulose(HPMC),during the process of which succinic anhydride and acetic anhydride were used as esterifying agent and acetic acid as organic solvent.By varying the amount of factors,HPMCAS with different cont…
Epoxy Resin Curing ProcessesSynthesis and properties of polymers
Shaohua Wu2012-01-01Energy Conservation Technology
Selective Non-Catalytic Reduction(SNCR) has a strict requirement on temperature,only after acquiring the exact temperature distribution in the furnace,the location of ejecting reduction reagent can be fixed.O2,CO and some other components shall have some influence on the procedure of SNCR,and the distribution of initi…
Catalytic Processes in Materials ScienceIndustrial Technology and Control Systems
WU Su-hua2012-01-01OpenAlex
The application of response surface method in the research of the formulations of PVC heat stabilizers was studied.According to Box-Benhnken design principle,a response surface analysis table of the three factors and three levels and the experimental programs of thermal stability time were designed.SAS was used to ana…
Color Science and ApplicationsIndustrial Vision Systems and Defect DetectionPolymer Science and PVC
Lihong Gong2012-01-01Journal of Natural Science of Heilongjiang University
The flower-like ZnO nanocrystals are prepared through one-step methods of reflux.The structure and morphology of the products are examined by SEM,XRD,FT-IR.The results indicated that the uniform flowerlike ZnO are actually obtained,which are consisted of nanosheets from self-assembled nanocrystalline.The as-synthesize…
ZnO doping and propertiesGas Sensing Nanomaterials and SensorsMercury impact and mitigation studies
Liu Bao-rui2012-01-01Chinese Journal of Surgical Oncology
Objective To compare the antitumor effects between paclitaxel-loaded liposomes and paclitaxel in vivo on S180 solid-tumor bearing mice.Methods Twenty Kunming mice bearing S180 solid-tumor xenograft were distributed into four groups randomly:contrast,empty-liposome,free paclitaxel and the paclitaxel-loaded liposome.Tre…
Nanoparticle-Based Drug DeliveryMicrotubule and mitosis dynamicsCancer-related Molecular Pathways
Yang Xiao-jie2012-01-01Rejiagong gongyi
Twin-wire indirect arc welding is a novelty welding method with research value in theory and application prospect.Following the theory of magnetic fluid dynamics,we established the numerical model of twin-wire indirect arc in three dimensions.The mathematic equations are solved in coupled electric field,magnetic field…
Welding Techniques and Residual StressesMetal Alloys Wear and PropertiesEngineering and Environmental Studies
Tan Wen2012-01-01Ironmaking & Steelmaking Processes Products and Applications
High yield ratio was a common problem for products made by CSP process.To reduce the yield ratio of SAPH370 steel,based on orthogonal experiment,the effect of finish rolling temperature(FT7),air-cooling temperature(ACT) and coiling temperature(CT) on yield ratio were investigated by two-stage cooling process,the stati…
Microstructure and Mechanical Properties of SteelsMetallurgy and Material FormingMetal Alloys Wear and Properties
Guoyang Li2012-01-01OpenAlex
The compositions of the bath and dross in the 55%Al-Zn pot for hot dip galvanizing have been detected.The effect of the temperature on the dross has been analyzed based on the Al-Zn-Si-Fe thermodynamic phase diagrams.The XRD result shows that the dross contains FeAl3 as the main component and a little Al11V as well.Th…
Electromagnetic wave absorption materials