Liu Qingtian2012-01-01Fuhe cailiao xuebao
A point of view that the carbon fiber has composite structure is proposed.The relationship between the practical elasticity coefficient of carbon fiber and the crystallinity,micro-fiber orientation and pore conditions was researched based on the micro mechanics theory for mechanical properties of composite materials,t…
Engineering Technology and MethodologiesMaterial Properties and ApplicationsAdvanced Theoretical and Applied Studies in Material Sciences and Geometry
Huang Guo-xiong2012-01-01Cailiao rechuli xuebao
Zinc coatings were mechanically deposited from the electrolyte solution containing nano-TiO2 particles.Microstructure of the coatings was studied by means of scanning electron microscopy(SEM),energy-dispersive X-ray spectrosmeter(EDS)and X-ray diffraction(XRD).The density of the coatings was measured and the corrosion…
Corrosion Behavior and InhibitionElectrodeposition and Electroless Coatings
Wei Wei2012-01-01Corrosion & Protection
This paper introduces the main reasons for Ti based metal oxide anodes' degradation including dissolution and desquamation of coating,passivation of Ti substrate,poisoningof coating,mechanical damage,unreasonable working conditions and so on.According to the recent measures taken by domestic and international research…
Catalytic Processes in Materials Science
Dun Zhang2012-01-01Total Corrosion Control
Sulfate-reducing bacteria (SRB) which can withstand a certain dissolved oxygen is not strictly anaerobic. However, the study of corrosion by SRB bacteria in the aerobic condition is still limited. In this study, corrosion behaviors of Q235 carbon steel in SRB’s aerobic seawater were studied by the electrochemical impe…
Corrosion Behavior and InhibitionConcrete Corrosion and Durability
LI Xi-liang2012-01-01Synthetic Fiber in China
The polyester(PET) draw textured yarn(DTY) has a complex end-use from different weaving machines.The influences of physical properties,apperance properties and dyeabilities of DTY on weaving and parameters adjustment are investigated.
Textile materials and evaluations
Tao Li2012-01-01Welded Pipe and Tube
This article compared and analyzed some test results of X70 SAWH pipe with different alloy content design,such as chemical composition,tensile test,impact test,DWTT and etc.The results indicated that the effect of Mo on pipeline steel strength is great,while the effect of Mo on toughness is not great.The properties of…
Hydrogen embrittlement and corrosion behaviors in metalsGeotechnical Engineering and Underground StructuresEngineering Structural Analysis Methods
Wenfei Peng2012-01-01Journal of University of Science and Technology Beijing
Based on the ring rolling theory and the principle of invariable volume during the rolling process,the design principle of flange blanks and the limit scope of process parameters were determined for producing high neck flanges.The closed ring rolling process of the flange blanks was simulated by a finite element model…
Metal Forming Simulation TechniquesMetallurgy and Material FormingMetal Alloys Wear and Properties
Zou Qing-yun2012-01-01OpenAlex
This paper introduces in details a new kind of summer cool quilts characteristic of moisture absorbable,breathable and antibiotic,and made of Outlast acrylic fiber,bamboo pulp fiber and moisture absorbable and breathable polyester fiber and designed in special structure.Concrete technical points in the production of t…
Natural Fiber Reinforced CompositesHygrothermal properties of building materialsBamboo properties and applications
Qinglai Zhang、Jun Chen2012-01-01Cailiao yanjiu xuebao
The cold-rolled polycrystalline molybdenum strip was laser shocked by the Thales laser with the maximum output laser pulse energy of 12.5 J,and the microhardness and microstructure of shocked specimens were analyzed.The results show that laser shock at high strain rate can achieve a double effect of forming and modifi…
Metal and Thin Film MechanicsDiamond and Carbon-based Materials ResearchSurface Treatment and Residual Stress
Chongtai Wang2012-01-01Journal of Hainan Normal University
A novel photo-Fenton-like(PFL) system using a Keggin-type iron-substituted heteropoly anion PW11O 39 Fe(Ⅲ)(H2O) 4[PW11Fe(Ⅲ)(H2O) ] as photocatalyst was employed to the photocatalyt ic degradation of dimethylphthalate(DMP).The experimental results showed that a complete DMP degradation and a 43% total organic carbon(TO…
Advanced Photocatalysis TechniquesPolyoxometalates: Synthesis and ApplicationsAdvanced Nanomaterials in Catalysis
Hua Li2012-01-01Food Science and Technology International
Experiment adopt enzyme method to produce the chitosan,which taking the raw material of aspergillus niger.We measures the value number of degree of deacetylation,viscosity,yield with difference condition via experiment many times,thus make sure the best experiment condition.Compare with the reaction in the microwave m…
Nanocomposite Films for Food PackagingEnzyme-mediated dye degradationCancer and biochemical research
Mingqing Chen2012-01-01Gōsei jushi
Oleic acid,formic acid and peroxide were used to synthesize epoxidized oleic acid,afterward,epoxidized calcium(zinc) oleate were synthesized by double decomposition reaction.The products were used as thermal stabilizers in PVC.Investigation of thermal stability of epoxidized calcium(zinc) oleate was investigated by me…
Polymer Science and PVC
Huadong Zhang、Mcc Paper2012-01-01China Pulp & Paper Industry
The process,equipment,raw materials and the operating procedure for the preparation of a water-in-water emulsion retention aid and its application were introduced.The results show that this retention aid has the advantage of high retention rate,low cost and worth of popularization.
Pickering emulsions and particle stabilizationCyclone Separators and Fluid DynamicsChemical and Environmental Engineering Research
Chen Bao-hua2012-01-01Journal of Qinghai Normal University
The paper introduces and analyzes domestic titanium concentrate and utilization status,titanium and titanium alloy smelting(ingot casting) and processing situation,thus proposes contermeasures of accelerating the development of titanium and titanium alloy industry in Qinghai province,firstly compiling Qinghai province…
Metallurgy and Material FormingTitanium Alloys Microstructure and PropertiesMetallurgy and Cultural Artifacts
Yaoxiang Geng、Song Zhi-qiang2012-01-01OpenAlex
In this paper we report on the structural,magnetic and magnetocaloric properties of the first-order phase transition materialMn1.3Fe0.7-xVxP0.45Si0.55(x=0,0.05,0.1,0.15).The XRD results show that the compounds crystallize in the Fe2P-type hexagonal structure with space group of P-62m.The lattice constants and unit cel…
Magnetic and transport properties of perovskites and related materialsShape Memory Alloy Transformations
Jiaxin Liu2012-01-01Zhongguo shuxue zazhi
Object To prepare the endotoxin adsorption materials by using Poly(vinyl alcohol)(PVA) as the carrier and different Amines as affinity ligands and then proceed to evaluate their adsorption capability and blood compatibility.Method PVA was graft-polymerized respectively by ethylendiamine(PN-1),hexane diamine(PN-2),trie…
Chemical Synthesis and AnalysisDendrimers and Hyperbranched PolymersBiopolymer Synthesis and Applications
Yu‐Sheng Yin2012-01-01OpenAlex
The pretreatment process of the carrier of Cu/SiO2 catalyst for hydrogenation of nitrobenzene to aniline and the influence of process conditions on pore structure of silica gel were investigated.The catalytic activity of Cu/SiO2 catalysts prepared by using pretreated and unpretreated carriers was evaluated.The results…
Catalytic Processes in Materials ScienceNanomaterials for catalytic reactions
Chuanglong He2012-01-01Cailiao kexue yu gongcheng xuebao
In this article,mechanical properties of a new type of foam-core sandwich composites are studied.The core was made by inserting thin-walled circular tubes into a PU foam,resulting in a significant reinforcement in its Z-directional properties.The sandwich composites were further fabricated by using FRP(fiber reinforce…
Mechanical Behavior of CompositesCellular and Composite StructuresPolymer composites and self-healing
Yanqing Li2012-01-01OpenAlex
Lab experiments show that the appropriate algorithm of DOA(Direction Of Arrival) estimation is the key of transformer PD(Partial Discharge) detection by ultrasonic array sensors.A modified FastDOA algorithm is proposed for transformer PD orientation with ultrasonic array signals,which adds an expansion coefficient to…
Advanced Fiber Optic SensorsHigh voltage insulation and dielectric phenomenaNon-Destructive Testing Techniques
Haifeng Song2012-01-01Zhongguo xin yao zazhi
Objective: To investigate the tissue distribution,pharmacokinetics and antitumor effects of rsTRAIL in animals.Methods: Radioisotope tracer labeling combined with trichloroacetic acid precipitation method was used to study the tissue distribution and excretion of rsTRAIL in nude mice.ELISA was used to determine the se…
Nanoparticle-Based Drug DeliveryCancer, Hypoxia, and MetabolismNanoplatforms for cancer theranostics