Qintao Wang2012-01-01Xiandai shengwu yixue jinzhan
Objective: The study aimed at the surface modification of oral biomaterials(expanded polytetrafluoro-ethylene,ePTFE) by means of oxygen plasma immersion ion implantation(PIII) and evaluating its survival condition.Methods: PIII had been used to modify the surface of ePTFE membrane,and the modified ePTFE samples were i…
Metal and Thin Film MechanicsElectrospun Nanofibers in Biomedical ApplicationsPolymer Nanocomposite Synthesis and Irradiation
Guangwen Xu2012-01-01OpenAlex
Metal oxide supported on activated carbon was used to remove low concentration NO at room temperature.Activated carbon was pretreated by oxidant before use.After nitrate acid treatment,both carbonyl and nitro groups on the surface of activated carbon increased,and the capacity of removing NO also increased significant…
Catalytic Processes in Materials ScienceIndustrial Gas Emission Control
Shouren Wang2012-01-01Machine Tool & Hydraulics
A metal toughening azotized Si3N4-based supercharger turbine was manufactured by using hot isostatic pressing.Since the new turbine both has high strength,high thermal conductivity and low thermal expansion coefficient and other characteristics of conventional silicon nitride materials,but also to a large extent overc…
Advanced ceramic materials synthesisCatalytic Processes in Materials ScienceGas Sensing Nanomaterials and Sensors
Lili Wang2012-01-01Zhonghua laonian xin-nao-xueguanbing zazhi
Objective To assess the biocompatibility,efficacy and safty of a self designed and manifactured novel absorbable magnesium alloy stent.Methods An absorbable magnesium alloy stent was implanted into the coronary and femoral artery of 35 hybrid dogs,respectively.The implanted stents were observed by coronary arteriograp…
Magnesium Alloys: Properties and Applications
Youxi Lin2012-01-01OpenAlex
Sn as an alloying element in the gray cast iron not only can strongly promote the formation of pearlite,but also refine the pearlite.When some pig iron was used to produce gray iron casting,crack or micro-cracks will form due to the excess Sn in the pig iron and this resulted in the reject of the castings.Cast iron sa…
Microstructure and Mechanical Properties of SteelsMetallurgy and Material FormingMetal Alloys Wear and Properties
Dongsheng Chen2012-01-01OpenAlex
Eight kinds of trousers' materials are chosen to make two types of trousers fit and tight.Through stress testing and data analysis,the main factors affecting the pressure of trousers on the knee,including material characteristic,trousers' fitness,and human movement state are attained.The more flexible a trousers' mate…
Textile materials and evaluations
Yin Li-pang2012-01-01Hebei ke-ji daxue xuebao
With maleic anhydride as raw material,hydrogen peroxide as oxidan,and sodium tungstate as catalyst,the intermediate epoxy succinic acid(ESA) is synthesized.Then,with epoxy succinate(ESA),acrylic acid(AA) and 2-acrylamido-2-methyl propane sulfonic acid(AMPS) as raw materials,and ammonium persulfate as initiator,a new t…
Calcium Carbonate Crystallization and Inhibition
Ruyi Qin2012-01-01OpenAlex
2,4-di-tert-butyl phenol(2,4-DTBP) was sythesized with phenol and tertiary butanol as feedstock in the presence of ultrastable Y(USY) modified by phosphowolframic acid(HPWA) catalyst in a steel-made micro-reactor.The effects of HPWA loading amount,reaction temperature,reaction time and feedstock ratio on the phenol co…
Mesoporous Materials and CatalysisAnalytical Chemistry and ChromatographyCatalysis and Oxidation Reactions
Jiang Dibo2012-01-01Cailiao daobao
Several typical preparing conditions such as annealed temperatures,annealing atmosphere,and substrate effect on the microstructure and electronic properties were introduced emphatically.The LNO films as bottom electrode or transition layers of PLT,PZT,BST ferroelectric and BFO ferroelectromagnetic on the electronic an…
Magnetic and transport properties of perovskites and related materials
Yihui Zhao2012-01-01OpenAlex
The effect of starting particle size on the mechanical properties of liquid-phase sintered Si3N4 ceramics was investigated using mill-refined Si3N4 powders and the appropriate additives.The microstructure and phase composition were determined by using SEM and XRD.The results indicate that the density,strength and hard…
Advanced ceramic materials synthesisAluminum Alloys Composites PropertiesRecycling and utilization of industrial and municipal waste in materials production
Kuiren Liu2012-01-01Chinese Rare Earths
This paper investigated the distribution and metabolism of nano-TiO2 and two kinds of rare-earth doped nano-titanium dioxide(nano-TiO2,Ce/TiO2 and CeO2/TiO2) in mice.The mice were treated with nano-TiO2,Ce/TiO2 and Ce-TiO2/KL powder by oral for 28 days.TiO2 in the tissues of the mice was detected by ICP-AES respective…
Advanced Nanomaterials in Catalysis
Chengli Yao2012-01-01Journal of Instrumental Analysis
Based on the basic principles of biomineralization,calcium carbonate was induced by egg white protein(EWP) in the dialysis bag compartment under biomimetic conditions.The different morphology and polymorphy of calcium carbonate were characterized by SEM and FT-IR spectra.The results showed that calcium carbonates were…
Calcium Carbonate Crystallization and InhibitionEnzyme Production and Characterization
Xie Xiang-li2012-01-01Acta Mineralogica Sinica
Taurine layered double hydroxide(TAU-LDH) and ibuprofen layered double hydroxide(IBU-LDH) were prepared with calcinated-hydration method,by using taurine(TAU) and ibuprofen(IBU) as interlayer anions.XRD and FT-IR were used to characterize the structure of intercalation compounds.Drug release characteristics of TAU-LDH…
Layered Double Hydroxides Synthesis and ApplicationsSynthesis and properties of polymersSilicone and Siloxane Chemistry
Xiaogang Li2012-01-01Keji daobao
The stress corrosion cracking(SCC) behavior of 2024-T351 aluminium alloy in acid NaCl solution was studied by using the electrochemical noise technique.The electrochemical noise signal was recorded during the immersion test of the Wedge Opening Loading(WOL) specimen in the Zero Resistance Ammeter(ZRA) mode.The charact…
Corrosion Behavior and InhibitionHydrogen embrittlement and corrosion behaviors in metalsNon-Destructive Testing Techniques
Jiang Jian-Jun2012-01-01Journal of Magnetic Materials and Devices
The relation of internal stress resulting from discrepancy of thermal expansion coefficient between the alloy core,glass cover layer and Young's modulus,thermal expansion coefficient,and the dimension of the glass-coated alloy microwires is investigated by analyzing of the origination of internal stress of glass-coate…
Magnetic Properties and Applications
Hongbin Yu2012-01-01Cailiao baohu
Al alloy 2E12-T3 was separately treated by Al surface-cladding,anodizing and micro-arc oxidation.An immersion corrosion test rig,a metallographic microscope,a scanning electron microscope and an X-ray diffractometer were performed to study the effect of surface treatment on the intergranular corrosion behavior and exf…
Corrosion Behavior and InhibitionHigh-Temperature Coating BehaviorsAluminum Alloy Microstructure Properties
Wenbo Lu2012-01-01Journal of Functional Biomaterials
SiC coating was prepared by three technologies on graphite with the purpose of optimizing the phase structure and researching the performance of antioxidant coating.The weight loss of different samples oxidated at 1400℃ for 10h was tested.The surface and cross-section morphology images of the coating before and after…
Advanced ceramic materials synthesisMetal and Thin Film MechanicsAluminum Alloys Composites Properties
Rao Tian-rong2012-01-01Cailiao rechuli xuebao
The non-quenched and tempered CT80 grade coiled tubing steels with different composition were designed.Effects of cooling rate,coiling temperature and Mo and Nb content on microstructure and mechanical properties of the non-quenched and tempered CT80 steels were investigated.The results show that when cooling rate inc…
Microstructure and Mechanical Properties of SteelsMetallurgical Processes and ThermodynamicsMetal Alloys Wear and Properties
H. B. Qi2012-01-01OpenAlex
With the style sense-evaluation method,different components of some hemp fabrics are tested for the characteristics analysis.The works can offer useful data for improving the performance of the hemp fabrics.
Textile materials and evaluationsColor perception and design
Yunjun Luo2012-01-01Chinese Journal of Explosives and Propellants
Resorcinol-formaldehyde/ammonium perchlorate(RF/AP) nanocomposite with different AP contents were prepared by the sol-gel and freeze drying method and characterized by FTIR,XRD,SEM,BET and TG/DSC methods.Results show that the sol-gel process can't destroy the crystal structure of AP.When AP content is lower than 60%,w…
Synthesis and properties of polymers