Jiao Ye-fan2012-01-01Boiler Technology
Nitric Oxides are recognized as one of the main air pollutants.Because of the high denitration efficiency of selective catalytic reduction(SCR),this technique becomes the main method of the coal-fired power station boiler in removing NOx.This paper combines the mechanism of SCR denitration and it is summarized the res…
Catalytic Processes in Materials Science
Lei Jing-xuan2012-01-01OpenAlex
The porous silica ceramic materials and parts were fabricated by pelletizing the pore-forming agents and silica particles with PVA,screening the granulation and then adding it to the silica slip,aging the slip in the vacuum conditions and casting the slip under pressure.The influence of the content of the pore-forming…
Silicone and Siloxane ChemistryEngineering Applied Research
Li Ma2012-01-01OpenAlex
Influence of magnesium content on the microstructure and electrochemical performance of Al-Zn-In-Mg-Ti-Ga-Mn alloy sacrificial anode were investigated by means of microscope,scanning electron microscope(SEM) and electrochemical methods.The results indicated that with the increase of Mg content,segregative phase increa…
Corrosion Behavior and InhibitionAluminum Alloy Microstructure PropertiesAdvanced Welding Techniques Analysis
Ying‐Chun Chen2012-01-01Physics Experimentation
Based on the analysis of the advantages and disadvantages of various methods to produce gratings,a method to produce low-frequency holographic grating was put forward using plane flat crystal reflection.To ensure the quality of the grating,the original light path was greatly simplified.The optical path was proved to b…
Optical Coatings and GratingsOptical Systems and Laser TechnologyAdvanced Measurement and Detection Methods
Tao Chen2012-01-01Cailiao kexue yu gongcheng xuebao
Peptide can self assemble through the noncovalent bond action,such as hydrogen bond,hydrophobicity and π-π accumulation,and form different peptide molecular aggregations,for example,molecular brick,molecular switch,molecular paint and nanofiber.These self-assembling peptides are characterized by their good biocompatib…
Chemical Synthesis and AnalysisSupramolecular Self-Assembly in Materials
Jiang Ting-shun2012-01-01Guisuanyan xuebao
A composite molecular sieve of Y/MCM-48 was hydrothermally synthesized at different crystallization temperatures and crystallization time using ethyl orthosilicate as Si source and cetyl trimethyl ammonium bromide as a template agent with fluoride.The sample was characterized by X-ray diffraction,Fourier transform-inf…
Zeolite Catalysis and SynthesisMesoporous Materials and CatalysisAnalytical Chemistry and Chromatography
Keqiang Qiu2012-01-01Applied Chemical Industry
High properties of activated carbon was prepared from FR-1 phenolic resin laminated board by CO2 activation.The effects of activation temperature,activation time and CO2 flow rate on the properties of the obtained carbons were investigated.The product has high porous structure with BET surface area of 1 198 m2/g,total…
Carbon Nanotubes in CompositesPolymer Foaming and Composites
Weng Hui2012-01-01Journal of Inner Mongolia University for the Nationalities
In this paper we have designed and synthesized two novel europium complexes,which doped it into PVK as the light-emitting layers to make EL devices,EL properties were measured.The mechanism of energy transfer in the doped system
Organic Light-Emitting Diodes ResearchMolecular Junctions and NanostructuresLanthanide and Transition Metal Complexes
Xueliang Chen2012-01-01Advanced materials research
Aiming at the problem that the prototype method of knitting dress designing has difficulty in controlling the changes of the sample sizes of knitted garments with high elasticity,this thesis tests the data of various parts of the cut-parts with high elastic knitted fabric on mannequin and human body with different spe…
3D Shape Modeling and AnalysisTextile materials and evaluations
Yougen Yi2012-01-01Journal of Functional Biomaterials
The method discrete dipole approximation(DDA) was used to theoretically calculate the extinction spectrum of ordered Au nanosphere arrays with different radius on the glass substrate.The DDA simulation of the ultraviolet-visible(UV-Vis) extinction spectra of ordered Au nanosphere arrays with various radius shows diffe…
GaN-based semiconductor devices and materialsPhotonic Crystals and ApplicationsSilicon Nanostructures and Photoluminescence
GU Shouyang2012-01-01Journal of Water Resources and Water Engineering
A novel Ti/MCM-22/MCM-41 composite material was prepared by Nano self-assembly method.The synthesized material was characterized by XRD,N2 adsorption,SEM,and subsequently applied in the Acid Red B degradation.Several parameters such as dosage of catalyst,reaction time,pH of wastewater,and initial concentration of dye…
Nanomaterials for catalytic reactionsAdvanced Nanomaterials in CatalysisWater Quality Monitoring and Analysis
Wang Fei2012-01-01Keji daobao
The low cycle fatigue property of the Zr-4 cladding before and after the neutron irradiation is investigated in this paper. The stress-strain curve and the Coffin-Manson relation of the pre-irradiation specimens are first obtained. Then an estimation of the effect of the neutron irradiation on the low cycle fatigue pr…
Fatigue and fracture mechanicsFusion materials and technologiesNuclear Materials and Properties
Qilong Zhang2012-01-01Electrical Engineering Materials
La1-xSrxCoO3-δ conductive ceramics with single-phase perovskite structure and good crystallization were prepared by sol-gel method.The structure and properties of La1-xSrxCoO3-δ ceramics were discussed,and its possibility of application in electrical contact materials was also investigated.Results show that with the d…
Advancements in Solid Oxide Fuel CellsGas Sensing Nanomaterials and SensorsElectrical Contact Performance and Analysis
Yiming Jiang2012-01-01Cailiao rechuli xuebao
Susceptibility to intergranular corrosion of Incoloy 800 alloy annealed at various temperatures ranging from 550 ℃ to 800 ℃ for 4 h was investigated by means of electrolytic etching in oxalic acid,double-loop electrochemical potentiodynamic reactivation(DL-EPR) and electrochemical impedance spectroscopy(EIS) technique…
Corrosion Behavior and InhibitionHydrogen embrittlement and corrosion behaviors in metalsWelding Techniques and Residual Stresses
Yan Zeng2012-01-01OpenAlex
The branched unsaturated polyester resin was synthesized from ethylene glycol,pentaerythrite(glycerin)and fumaric acid.The products were characterized by FTIR and the properties were investigated by GPC,DSC and TGA.The results showed that the optimal polyol amount was 5%(based on the molar of fumaric acid)and the suit…
Synthesis and properties of polymers
Guo Daoqiang、Xianna Meng、Zhang Hui2012-01-01Rejiagong gongyi
The hot compression tests of Al-Mn-Mg-RE alloy were performed at 300 ℃~500 ℃ under the strain rate of 0.01 s-1~10 s-1 on Gleeble-1500 system.The results show that the true stress-true strain curves exhibit a peak stress at a critical strain,and then,the flow stress decreases monotonically.The peak stress decreases as…
Microstructure and mechanical propertiesMetallurgy and Material FormingPowder Metallurgy Techniques and Materials
Yan Li2012-01-01Journal of Jilin Institute of Chemical Technology
In this paper,1,8-naphthalimide and its derivatives were studied by DFT//B3LYP density functional method with 6-31G basis set.The results show that:1,8-naphthalimide molecule and its derivatives have certain rigidity.Introducing strong electron-donor and acceptor groups is conductive to electronic transitions in view…
Molecular Sensors and Ion DetectionNonlinear Optical Materials ResearchPhotochromic and Fluorescence Chemistry
Jiashun Xu2012-01-01Dyeing & Finishing
The deoiling agent XP is applied to soaping process of polyester-cotton blends.The influence of the dosage of deoiling agent on deoiling and soaping effect is discussed.The results show that the deoiling agent XP has a perfect deoiling ability and no negative effects on soaping and color fastness under the condition o…
Textile materials and evaluations
Zhao Yun-tang2012-01-01China Metallurgy
The microstructure and texture in DP590 dual phase steel through different process were studied respectively by means of field emission scanning electron microscope(FESEM) and electron back-scatter diffraction(EBSD).The results show that the microstructure have a large change from hot rolling and cold rolling to conti…
Microstructure and Mechanical Properties of SteelsMetallurgy and Material FormingMetal Alloys Wear and Properties
Bai Dongping、Jieting Zhang、Hui Deng2012-01-01Journal of Microwaves
A new kind of left-handed material(LHM) was proposed according to the E-shaped structure has the effctive inductance and capacitance which are essential conditions to produce negative permeability.The new structure used Eshaped split ring resonators to achieve negative permeability and wires to achieve negative permit…
Antenna Design and AnalysisMetamaterials and Metasurfaces ApplicationsAdvanced Antenna and Metasurface Technologies