Chun‐Bo Liu、Jing Chen、Bai Hong-Ye 等 6 位作者2012-01-01结构化学
In the title coordination compound,[Cu(HDPPZC)(SO4)(H2O)]2 (1,HDPPZC=dipyrido[3,2-a:2,3-c]-phenazine-2-carboxylic acid),has been hydrothermally synthesized and characterized by single-crystal X-ray diffraction,elemental analysis and magnetic susceptibility measurement.It crystallizes in triclinic,space group P1 with a…
Metal-Organic Frameworks: Synthesis and ApplicationsMagnetism in coordination complexesPolyoxometalates: Synthesis and Applications
Raquel Lucena、J.C. Conesa、Fernando Fresno 等 6 位作者2012-01-01UPM Digital Archive (Technical University of Madrid)
Nowadays one of the challenges of materials science is to find new technologies that will be able to make the most of renewable energies. An example of new proposals in this field are the intermediate-band (IB) materials, which promise higher efficiencies in photovoltaic applications (through the intermediate band sol…
Quantum Dots Synthesis And PropertiesChalcogenide Semiconductor Thin Films
Kayode Adekunle、S. W. Cho、Christian Patzelt 等 5 位作者2012-01-01Borås Academic Digital Archive (University of Borås)
Impact and flexural properties of flax fabrics and Lyocell Fiber reinforced bio-based thermoset for automotive and structural applications
Natural Fiber Reinforced Composites
Sun、Zhi-fu、Ma 等 11 位作者2012-01-01中国工程科学:英文版
Using high strength steel and ultra-high strength steel in hot stamping and automobile parts is one of the most important ways of the automobile lightweight,which is the development trend of automobiles currently.In this paper, the development of test device for heat friction coefficient by high strength steel can pro…
Microstructure and Mechanical Properties of SteelsMetallurgy and Material FormingMetal Alloys Wear and Properties
Tatsuya Kuboyama、Yasuo Moriyoshi、Toshio Yamada 等 6 位作者2012-01-01The Proceedings of the International symposium on diagnostics and modeling of combustion in internal combustion engines
To clarify the mechanism of high brake thermal efficiency of HCCI combustion compared to SI combustion, the contributions of pumping loss, friction loss and gross indicated thermal efficiency were investigated. Also, independent effects of heat loss, specific heat ratio, heat release profile and combustion timing on g…
Advanced Combustion Engine TechnologiesCatalytic Processes in Materials ScienceBrake Systems and Friction Analysis
Shreelekha Mishra2012-01-01OpenAlex
Superconductor Bi2Sr2Ca1Cu2O8 is prepared by solid state route and the substituent element La0.85Sr0.15MnO3 is prepared by sol-gel combustion route. Then the composite of BSCCO(2212) with LSMO having different composition are prepared by solid state route. X-ray diffraction of BSCCO(2212) sintered at 8800C for 12hrs a…
Physics of Superconductivity and MagnetismMagnetic and transport properties of perovskites and related materialsMultiferroics and related materials
Tobias Köhnke、Arthur J. Ragauskas、Hans Theliander2012-01-01Chalmers Publication Library (Chalmers University of Technology)
In the current trend for a more effective utilization of biomass, increased attention has been focused to the engineered exploitation of xylans as biopolymer resources in the development of new materials. The xylan backbone has an affinity to cellulose and will adsorb irreversibly on cellulosic surfaces, an inherent p…
Surface Modification and SuperhydrophobicityAdvanced Cellulose Research StudiesAerogels and thermal insulation
Wenqing Wu、Yongjun Wei、Jingwen Ba 等 4 位作者2012-01-01Fusion Science & Technology
Protium-deuterium isotope separation and tritium enrichment experiments have been carried out under the condition of a total reflux cycle using a continuous twin-bed hydrogen isotope separation technique, i.e., a twin-bed periodically counter-current flow technique. Two beds were packed with Pd and LaNi4.7Al0.3, which…
Fusion materials and technologiesParticle accelerators and beam dynamicsSuperconducting Materials and Applications
Ye Liu、Yu Xianbo、Lei Qin 等 5 位作者2012-01-01OpenAlex
ZSM-5 zeolite was in-situ synthesized from metakaolin or spinel by incorporating additional silica and alumina sources, respectively. The ZSM-5 zeolite was characterized by X-ray diffractometry (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy and N2 adsorption measurement. Thi…
Catalytic Processes in Materials ScienceZeolite Catalysis and SynthesisMesoporous Materials and Catalysis
Vinzent Monnerjahn、Sirko Fricke2012-01-01OpenAlex
Das Festwalzen ist ein spanloses, umformendes Verfahren zur positiven Beeinflussung der Randzoneneigenschaften eines Bauteils. Das Verfahren zeichnet sich dadurch aus, dass es als einziges mechanisches Verfahren zur Steigerung der Bauteillebensdauer sowohl eine Glattung der Ober¬flache, eine Induzierung von Druckeigen…
Advanced machining processes and optimizationMetal Forming Simulation TechniquesMetal Alloys Wear and Properties
Hui Tian、Jian Cui、Huang YuFan 等 4 位作者2012-01-01Medicinal plant
[Objective] To study the pharmacognostical characteristics of Rhaphidophora hongkongensis Schott.[Method] The cross-section of stem and leaf and the medicinal powder of Rhaphidophora hongkongensis Schott.were identified under microscope and their physiochemical characteristics were identified.[Result] Rhaphidophora ho…
Phytochemistry and Bioactive Compounds
Hongwei Zhao、Lichun Hu、Zhanxin Zhang2012-01-01Journal of Nanomaterials
La0.67Sr0.20Cu0.10□0.03MnO3 (“□” representing cation vacancy) polycrystalline manganite powder was synthesized by sol‐gel method, which we used as parent materials. After reduced in hydrogen atmosphere for 30 and 60 minutes at a temperature of 400°C, the series bulk samples were obtained by sintering in argon atmosphe…
Magnetic and transport properties of perovskites and related materialsRare-earth and actinide compoundsAdvanced Condensed Matter Physics
Francisca José Castillo Rueda、Oscar David de Cózar、Elidia Beatriz 等 4 位作者2012-01-01OpenAlex
There are an estimated 1.19 million wheelchair users in Spain. People use wheelchairs for a variety of reasons, the most common one is paralysis from spinal cord injuries. Current estimates indicate there are around 504,000 people alive in Spain with spinal cord injuries. Among other reasons for using wheelchairs are:…
Material Selection and PropertiesSustainable Design and DevelopmentErgonomics and Human Factors
Paweł Maciakowski、B. Augustyniak、Leszek Piotrowski 等 4 位作者2012-01-01Proceedings of Electrotechnical Institute
Artykul ten przedstawia wplyw zmian w mikrostrukturze stali P91, powstalych w skutek obrobki cieplnej, na wlaściwości mechanicznego efektu Barkhausena (MeBN). Parametry takie jak amplituda obwiedni napiecia skutecznego (RMS) MeBN oraz polozenie maksimum tejze obwiedni porownywane są, pod kątem czulości na obrobke ciep…
Microstructure and Mechanical Properties of SteelsMagnetic Properties and ApplicationsAdvancements in Materials Engineering
关山、田颖、郭艳艳 等 5 位作者2012-01-01Acta Scientiarum Naturalium Universitatis Sunyatseni
Intense 2.7-μm emissions are obtained from Er3+/Nd3+ co-doped tellurite glass samples under the 808-nm laser diode excitation.According to the absorption spectra,Judd-Ofelt parameters and radiative transition probabilities are calculated and analyzed using the Judd-Ofelt theory.The spectroscopic properties and energy…
Glass properties and applicationsSolid State Laser TechnologiesOcular and Laser Science Research
Liping Wang、Liu Dong-rong、Erjun Guo 等 6 位作者2012-01-01DOAJ (DOAJ: Directory of Open Access Journals)
A new physical simulation model was developed to simulate the casting process of the ductile iron heavy section spent-nuclear-fuel container. In this physical simulation model, a heating unit with DR24 Fe-Cr-Al heating wires was used to compensate the heat loss across the non-natural surfaces of the sample, and a prec…
Graphite, nuclear technology, radiation studiesNuclear and radioactivity studies
Qian Xiong、Kazuki Inaba、Tie Li 等 7 位作者2012-01-01The Proceedings of the International symposium on diagnostics and modeling of combustion in internal combustion engines
The effects of fuel properties including ignitability, volatility, and compositions on operational range and combustion characteristics of premixed diesel combustion with various high volatility model fuels and an ordinary diesel fuel were examined in a DI diesel engine. The IMEP was limited by knocking with high inta…
Advanced Combustion Engine TechnologiesCatalytic Processes in Materials ScienceCombustion and flame dynamics
J. Shengqiang、Yongfen Luo、Jing Hai-ying 等 6 位作者2012-01-01PRZEGLĄD ELEKTROTECHNICZNY
Five typical partial discharge (PD) models of oil-paper insulation are made in the article, time series of PD’s amplitude are fetched from the results measured, after being pre-processed, they are fitted by auto regressive (AR) model, the coefficients of the AR model are used as feature vector to recognize the five ty…
High voltage insulation and dielectric phenomenaPower Transformer Diagnostics and InsulationElevator Systems and Control
Evan M. Erickson2012-01-01OpenAlex
The electrochemically catalyzed oxygen reduction reaction (ORR) is essential to operation of most fuel cells and many types of batteries; oxygen, being prevalent in air, provides a costless, ambient, high-energy (1.23 V vs. normal hydrogen electrode) hole source to complete the electrochemical redox circuit. Oxygen ma…
Electrocatalysts for Energy ConversionFuel Cells and Related MaterialsConducting polymers and applications
Gen Shibata、Keisuke Tanaka、Yuhi Chiba 等 5 位作者2012-01-01The Proceedings of the International symposium on diagnostics and modeling of combustion in internal combustion engines
The simultaneous reduction of NOx and PM is an urgent challenge for diesel emissions. In this paper, di-methyl ether (DME) was used as a NOx deoxidizer in a selective catalytic reduction (SCR) after-treatment system. With 574 grams of 2-3 mm diameter pellets of Ag(1wt%)-γAl_2O_3 in the cylindrical vessel of the SCR, t…
Catalytic Processes in Materials ScienceVehicle emissions and performance