Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Technologies currently in use cannot effectively detect foreign materials in cotton because they appear the same as the cotton fibres. The objective of this research was to develop a multiwavelength imaging system (MIS) for detecting foreign materials in the spectral region from 405 nm to 940 nm. This method is based…
A method is put forward to measure the linear electro-optic (EO) coefficient at high frequency using a light-coupled microwave cavity perturbation method of standing wave condition. The method is used to determine the EO coefficient of Sr0.61Ba0.39Nb2O6 (SBN) crystal fiber. The electro-optic coefficient r33 of SBN cry…
The tin oxide and silicon oxide films have been deposited on polycarbonate substrates as gas barrier films, using a thermal evaporation and ion beam assisted deposition process. The oxide films deposited by ion beam assisted deposition show a much lower water vapor transmission rate than those by thermal evaporation.…
Abstract New stainless steel OCTG (New 15Cr steel pipe: 0.03C-15Cr-6Ni-2Mo-1Cu) with high strength and superior corrosion resistance has been developed and its capability in oil and gas production environment is shown. The yield strength of the new 15Cr steel pipe was higher than 861 MPa (125 ksi), and good Charpy tou…
Abstract The electron back-scattered diffraction (EBSD) technique has been applied to fine-grained kaolin minerals to determine the polytypes (kaolinite, dickite and nacrite) of individual grains and their crystallographic orientations in a scanning electron microscope (SEM). Because kaolin minerals are prone to radia…
The objective of this study is to evaluate the effect that mechanical training has on the properties of NiTi based shape memory alloys. The unique mechanical behavior of shape memory alloys, which allows the material to undergo large deformations while returning to their original undeformed shape through either the sh…
The aim of the study is to evaluate the effect of modifying collagen matrices with Arg-Gly-Asp (RGD) peptide through periodate oxidation. The collagen matrices were modified with RGD peptide, by periodate activation. The modified collagen matrices and unmodified matrices were characterized by scanning electron microsc…
Single-wall carbon nanotubes (SWNTs) were functionalized with biotin at the ends and sidewalls of the nanotubes in a series of chemical reactions. Streptavidin-coated gold nanoparticles were attached to the biotin-modified SWNTs in solution in a self-assembly process. Gold nanoparticles which connected two SWNTs were…
Abstract Summary: Poly(butylene succinate) (PBS) and PBS‐based ionomers (PBSi's) with 0.3 and 1.2 mol‐% of sodium sulfonated succinate unit were synthesized. The existence of ionic aggregates in the ionomer matrices was indicated by melt viscosity and glass transition data. It seems that the ionic aggregates have two…
As more alternative, lightweight actuators have become available, the conventional fixed-wing configuration seen on modern aircraft is under investigation for efficiency on a broad scale. If an aircraft could be designed with multiple functional equilibria of drastically varying aerodynamic parameters, one craft capab…
A facile, efficient synthesis of 1 --> 3 C-branched polyamide dendrons is described. Treatment of acryloyl chloride with 1 --> 3 C-branched amines, e.g., di-tert-butyl 4-[2-(tert-butoxycarbonyl)ethyl]-4-aminoheptanedioate, gave the corresponding acrylamides in high yields, which upon reaction with nitromethane generat…
The template-directed nucleation of inorganic materials by organic supramolecular frameworks is an overarching principle in biomineralization. In the present work, synthesized latex particles of poly(styrene-ran-methacrylic acid) were used as additives for the crystallization modification of calcium carbonate (CaCO 3…
Low molecular weight peptidomimetics with simple amphiphilic sequences can help to elucidate the structures of cross beta-sheet assemblies, such as amyloid fibrils. The peptidomimetics described herein comprise a dibenzofuran template, two peptide strands made up of alternating hydrophilic and hydrophobic residues, an…
The adsorption of an armchair single-walled carbon nanotube (CNT) on fully and partially hydrogenated Si(001) surfaces are studied from first-principles calculations. Our results indicate that the electronic properties of the adsorbed CNT can be ruled by the H concentration along the CNT–H∕Si(001) contact region. On t…
Diamond has been identified as a very promising material for X and ultraviolet sensing. In this Letter, a photoconductive device based on a freestanding homoepitaxial chemically vapor deposition (CVD) single-crystal diamond 500μm thick has been tested. Photoconductive measurements in coplanar and transverse configurat…
Highly oriented Ba0.7Sr0.3TiO3 thin films were grown on MgO (001) single-crystal substrate using pulsed-laser deposition and the in-plane ferroelectric properties of the film were evaluated. X-ray diffraction characterization revealed a good crystallinity and tensile in-plane stress in the film. A well-defined ferroel…
Separation of single-walled carbon nanotubes (SWNTs), according to their electronic characteristics, is essential to the development of molecular electronics, including field-effect transistors. Recent efforts by many groups have used non-covalent and covalent sidewall chemistry to probe differential reactivity in met…
We characterized single-walled carbon nanotubes before and after HNO3/H2SO4 treatments for different times by scanning electron microscopy, Raman spectroscopy, and N2 adsorption at 77 K. Single-walled carbon nanotube assembly revealed a bimodal pore structure of microporosity (surface area of 476 m2 g(-1)) and mesopor…
We performed direct solvent-free amination of multi-walled carbon nanotubes (MWCNTs) with nonylamine, dodecylamine, octadecylamine, 4-phenylbutylamine and 1,8-ocanediamine at a temperature of 150-170 degrees C and reduced pressure. Thermogravimetric analysis and temperature-programmed desorption-mass spectrometry reve…
Single-crystalline MgxZn1−xO (0≤x≤0.25) nanowires on glass substrates obtained by a hydrothermal method: growth, structure and electrical characteristics, Lee, Chia Ying, Tseng, Tseung Yuen, Li, Seu Yi, Lin, Pang