Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
During and after plastic deformation of metals, dislocations tend to evolve into generally well-defined structures that may include tangles, bands, cell walls, and various additional features. Observation of these structures by electron backscatter diffraction is only accomplished by analysis of changes in orientation…
The texture evolution in the plastic deformation layer of the pure iron sample after the surface mechanical attrition treatment (SMAT) was discussed through electron backscattering and X-ray diffraction (XRD) analysis. The results showed that: the surface layer of the iron sample can be subdivided into four sub-layers…
The study on left-handed materials (LHMs) is a international research hot spot in recent 10 years, the LHMs have important application value in many fields, the study of resonance frequency is the focus of LHMs. Periodic split ring resonators (SRRs) structure is one important method of realization LHMs. The further re…
An integrated crystal plasticity-phase field model has been developed to simulate the static recrystallisation textures of both Face-Centred Cubic (FCC) and Body-Centred Cubic (BCC) metals. Nucleation sites are determined using the Orientation Dependent Recovery (ODR) theory. Both the interface mobility and the grain…
In this paper, mesoporous indium oxide has been synthesized by the hard template route from the SBA-15 silica template. The results characterized from XRD, and N2 adsorption-desorption demonstrated that the synthesis can be controlled successfully in nanometer (meso-structure) scale. The obtained sample was investigat…
ZL114 aluminum alloy samples were treated by micro-arc oxidation using alkaline solution added different amount of nano-Al2O3 to improve the surface properties. Effects of the additives were investigated by thickness, hardness, morphologies and corrosion performance. The results indicated that proper amount of nano-Al…
The model of cellular automaton (CA) for simulating the static recrystallization of Nb micro alloyed steel after hot deformation was established. The static precipitation of micro alloyed elements on the impact of static recrystallization was considered in the mode. The microstructure evolution of austenite static rec…
There has recently been significant interest in the problem of variant selection in the strain-induced transformation of austenite to α’-martensite in metastable austenitic stainless steels. Previous work has highlighted our poor understanding of the mechanisms leading to this transformation, in particular the role th…
Present work describes the evolution of texture during different modes of deformation by cold rolling of a Gum metal or multifunctional β titanium alloy. The starting and cold rolled materials exhibit the presence of β and β with small amount of stress induced martensitic (α˝) phases, respectively. The development of…
Square-wave double pulse current was used to electrodeposit Ni-W-P-CeO2-SiO2 composite coatings in fine-grained structure on the surface of carbon steel, influences of forward pulse average current density, +Jm, in the range of 5~25A/dm2 on characteristics of the composite coatings were researched, and the chemical co…
Cu2O thin films is preparated through electrodeposition with conductive glass of coating indium tin oxide as work electrode.The effects of various factor upon Cu2O film morphology are investigated.The best conditions of electrodeposition Cu2O film are discussed.The deposition potential is determined by Linear sweep vo…
Abstract The palladium(II) and platin(II) 1, 1‐dicyanoethylene‐2, 2‐dithiolates [(L–L)M{S2C=C(CN)2}] (M = Pd: L–L = dppm, dppe, dcpe, dpmb; M = Pt: dppe, dcpe, dpmb) were prepared either from[(L–L)MCl2] and K2[S2C=C(CN)2] or from [(PPh3)2M{S2C=C(CN)2}] and the bisphosphane. Moreover, [(dppe)Pt{S2C=C(CN)2}]was obtained…
Abstract The title complex, [Cu4(O2CCH2CH2CH3)4] (1), has a planar core comprised of four copper atoms bridged by four butyrate ligands alternating above and below the Cu4-plane. The intramolecular Cu···Cu distances within the Cu4-core are very close, being 2.7255(5) and 2.7261(5) Å. In the solid-state, the Cu4-units…
Recently, well-ordered biological materials have been exploited to pattern inorganic nanoparticles into linear arrays that are of particular interest for nanoelectronic applications. In this work, a de novo designed E. coli-expressed polypeptide (previously shown to form highly rectilinear, β-sheet-containing structur…
The role of rare earth addition on the microstructure and texture during recrystallization of cold rolled sheets is investigated by a comparative study of pure Mg, Mg-3Y and Mg1.5Nd sheets. In pure Mg, nucleation occurs mainly at shear bands which results in a texture weakening. The basal-type texture re-strengthens r…
Ethylene oxide (EO) is an important organic chemical material, and Silver catalyst is an important petrochemical catalyst and is regarded as the core of EO/EG production process. The catalyst's performance is the major factor that directly determines the economic efficiency of commercial production of ethylene oxide.…
We researched and developed effective polymer bitumen composites for hermetic of deformities seals of concrete and asphalts roads, bridges, aerodrome and airfields used in hot climate conditions and high lands.
This paper utilized a novel oxidative co-precipitation method to synthesis hexagonal Fe3O4 nanometer particles, which assisted by a weakly magnetic field. The crystallinity, morphology, particle size distribution, compositions and magnetic properties of the as-prepared particles were investigated using powder X-ray di…
Diamond-coated drawing dies are considered as ideal drawing dies for their unique characteristics, such as high hardness, wear resistance and low friction. In order to utilize the superior characteristics of diamond coatings towards improving the drawing performance, the nonlinear FEM simulation is used to simulate th…
This paper investigates the bulk texture evolution during cold rolling and annealing of Dual Phase steels for different processing conditions, i.e. cold reduction within the reduction range of 45 to 73% and annealing at temperatures between 650 and 850°C, which includes the recovery, recrystallisation and partial phas…