Florian Schindler、John M. Lupton、Jochen Feldmann 等 4 位作者2004-04-05Advanced Materials
Dramatic fluorescence bursts (see Figure and cover) from conjugated polymers are observed upon exposure to air. The burst occurs prior to photo‐oxidation and is imaged in single molecules of a ladder‐type polymer, but is also found in bulk films. Triplet shelving is identified as an important mechanism limiting the fl…
Organic Electronics and PhotovoltaicsLuminescence and Fluorescent MaterialsAnalytical Chemistry and Sensors
Radwan Dweiri、Che Husna Azhari2004-04-05Journal of Applied Polymer Science
Abstract The structure–property relationship of sugarcane bagasse fiber‐filled polyamide 6 blends at different blend compositions has been investigated. Blends were prepared in the composition of wt % PA6/wt % bagasse as follows: 98/2, 95/5, and 90/10 for three fiber length ranges (<100, <250, and <500 μm) us…
Polymer crystallization and propertiesPolymer Nanocomposites and PropertiesNatural Fiber Reinforced Composites
Satoshi Okabe、Keiichi Ando、Kenji Hanabusa 等 4 位作者2004-04-05Journal of Polymer Science Part B Polymer Physics
Abstract Small‐angle neutron scattering (SANS) and light scattering studies were carried out on an organogel consisting of a gelator, coded P‐1, and dimethyl sulfoxide (DMSO). The gelator was made of an oligosiloxane stem and about eight branches of an amino acid derivative combined with a long alkyl chain. The amino…
Hydrogels: synthesis, properties, applicationsGlycosylation and Glycoproteins ResearchSupramolecular Self-Assembly in Materials
Mattias Forsblom、Nils Sandberg、Göran Grimvall2004-04-05Physical Review B
The vibrational heat capacity of aluminum at fixed volume is studied in molecular dynamics and Monte Carlo simulations, using effective interactions due to Ercolessi and Adams, Mishin et al., and Mei and Davenport. When experimental data are reduced to represent the classical vibrational heat capacity at fixed volume,…
High-pressure geophysics and materialsThermal properties of materialsnanoparticles nucleation surface interactions
R. Mahendran、Ramamoorthy Malaisamy、G. Arthanareeswaran 等 4 位作者2004-04-05Journal of Applied Polymer Science
Abstract Ultrafiltration membranes are largely applied as macromolecular solutes and heavy‐metal‐ion separation from aqueous streams. Cellulose acetate and poly(ether sulfone) blend ultrafiltration membranes were prepared by the precipitation phase‐inversion technique in 100/0, 95/5, 85/15, and 75/25% polymer blend co…
Membrane Separation TechnologiesPolymer crystallization and propertiesbiodegradable polymer synthesis and properties
Yuri M. Boiko、Anders Bach、Jørgen Lyngaae‐Jørgensen2004-04-05Journal of Polymer Science Part B Polymer Physics
Abstract Films of amorphous polystyrene (PS) with a weight‐average molecular weight ( M w ) of 225 × 10 3 g/mol were bonded in a T‐peel test geometry, and the fracture energy ( G ) of a PS/PS interface was measured at the ambient temperature as a function of the healing time ( t h ) and healing temperature ( T h ). G…
Polymer crystallization and propertiesPolymer Nanocomposites and PropertiesPolymer composites and self-healing
Yusuke Yamauchi、Tokihiko Yokoshima、Hitomi Mukaibo 等 8 位作者2004-04-05Chemistry Letters
Abstract Highly ordered mesoporous Ni particles have been prepared by electroless deposition using lyotropic liquid crystals as templates. The bath conditions, in particular the kind of the reducing agents, greatly affected the degree of the ordering of mesostructures. By using well chosen appropriate reducing agents…
Supercapacitor Materials and FabricationMesoporous Materials and CatalysisNanoporous metals and alloys
Fabrice Goubin、Xavier Rocquefelte、Myung‐Hwan Whangbo 等 6 位作者2004-04-05ChemInform
Abstract For Abstract see ChemInform Abstract in Full Text.
Luminescence Properties of Advanced MaterialsCrystal Structures and PropertiesAdvanced Condensed Matter Physics
Ivan V. Ushakov、Victor A. Feodorov、I. E. Permyakova2004-04-05Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE
Plasticity and microhardness of annealed metallic glass (MG) on the basis of cobalt were investigated. Pursuant to specificity of geometry of ribbon samples and amorphous state, measurement regime of true microhardness of MG is detected. It was found abnormal behavior of microhardness at the stage of transition from a…
Metallic Glasses and Amorphous AlloysMaterial Properties and ApplicationsMaterial Science and Thermodynamics
Helmut Knoll2004-04-05ChemInform
Abstract For Abstract see ChemInform Abstract in Full Text.
Radical Photochemical ReactionsPhotochromic and Fluorescence ChemistryPhotoreceptor and optogenetics research
Md. Ibrahim H. Mondal、Rashidul Alam、Md. Abu Sayeed2004-04-05Journal of Applied Polymer Science
Abstract Graft copolymerization of nitrile monomers, such as acrylonitrile and methacrylonitrile, onto bleached jute fiber was carried out by using K 2 S 2 O 8 /FeSO 4 redox system in nitrogen atmosphere and their effect on the textile characteristics was also investigated. Percent graft yield increased with the incre…
Conducting polymers and applicationsMicroplastics and Plastic PollutionPolymer Science and PVC
Susana Trasobares、Chris Ewels、J. Birrell 等 9 位作者2004-04-05Advanced Materials
Graphitic platelets (wings) on carbon nanotubes are produced using a new two‐step chemical vapor deposition method (see Figure and inside cover). Chemical attack during the process, aided by curvature‐induced strain, rips open the outer nanotube walls and produces an irregular and corrugated surface. The new morpholog…
Carbon Nanotubes in CompositesGraphene research and applicationsFiber-reinforced polymer composites
Zhaorong Yang、Xinyu Bao、Shun Tan 等 4 位作者2004-04-05Physical Review B
The magnetotransport properties of the spinel ${\mathrm{Fe}}_{1\ensuremath{-}x}{\mathrm{Cd}}_{x}{\mathrm{Cr}}_{2}{\mathrm{S}}_{4}$ have been studied. We found that the magnetic polarons dominate the conduction at temperatures above the Curie temperature ${\mathrm{T}}_{c}.$ Upon substitution of Fe by Cd, the carrier de…
Magnetic and transport properties of perovskites and related materialsMultiferroics and related materialsAdvanced Condensed Matter Physics
Takeshi Kuroki、A. Shibuya、Masahiro Toriida 等 4 位作者2004-04-05Journal of Polymer Science Part A Polymer Chemistry
Abstract To obtain a melt‐processable thermosetting polyimide having a high glass‐transition temperature ( T g ) and good solvent resistance, the effect of introducing a crosslinkable agent into the polymer chain ends of the melt‐processable polyimide on its physical properties was studied. The polyimide (calculated n…
Polymer Nanocomposites and PropertiesEpoxy Resin Curing ProcessesSynthesis and properties of polymers
M. Cannas、F. M. Gelardi2004-04-05Physical Review B
We investigated the red-luminescence band at 1.9 eV in a $\ensuremath{\gamma}$ ray irradiated synthetic wet silica, under ultraviolet and vacuum-ultraviolet excitations in the temperature range 17--300 K. The excitation profile detected at $T=17\mathrm{K}$ evidences a broad band peaked at 6.4 eV, with full width at ha…
Luminescence Properties of Advanced MaterialsGlass properties and applicationsPhotochemistry and Electron Transfer Studies
Masahide Shimokawabe、Noriyoshi Umeda2004-04-05Chemistry Letters
Abstract The catalytic reduction of NO with CO was investigated in the presence of oxygen over 16 supported metallic catalysts. Ir/WO3, Ir/ZnO, and Rh/Al2O3 showed the pronounced activity even in excess amount of oxygen. The effect of preparation conditions on the activity of Ir catalysts was further studied and it wa…
Catalytic Processes in Materials ScienceAmmonia Synthesis and Nitrogen ReductionIndustrial Gas Emission Control
Sheng‐Huei Hsiao、Chin‐Ping Yang、Sheng‐Ching Huang2004-04-05Journal of Polymer Science Part A Polymer Chemistry
Abstract A novel, trifluoromethyl‐substituted, bis(ether amine) monomer, 1,4‐bis(4‐amino‐2‐trifluoromethylphenoxy)naphthalene, was synthesized through the nucleophilic displacement of 2‐chloro‐5‐nitrobenzotrifluoride with 1,4‐dihydroxynaphthalene in the presence of potassium carbonate in dimethyl sulfoxide, followed b…
Epoxy Resin Curing ProcessesSynthesis and properties of polymersTribology and Wear Analysis
Zaoli Zhang、Wilfried Sigle、Wolfgang Kurtz2004-04-05Physical Review B
A [100] twist low-angle grain boundary in ${\mathrm{SrTiO}}_{3}$ was systemically studied by means of conventional transmission electron microscopy, high-resolution transmission electron microscopy (HRTEM), lattice distortion analysis, and electron energy-loss spectroscopy (EELS). A dislocation network is formed in th…
Ferroelectric and Piezoelectric MaterialsSemiconductor materials and devicesElectronic and Structural Properties of Oxides
A. V. Joura、D. O. Demchenko、J. K. Freericks2004-04-05Physical Review B
We calculate thermal transport in the Falicov-Kimball model on an infinite-coordination-number Bethe lattice. We perform numerical calculations of the thermoelectric characteristics and concentrate on finding materials parameters for which the electronic thermoelectric figure-of-merit $\mathrm{ZT}$ is large, suggestin…
Physics of Superconductivity and MagnetismAdvanced Thermoelectric Materials and DevicesOrganic and Molecular Conductors Research
Daniel A. Hammer、Jianzhong Wu、Chris Leighton2004-04-05Physical Review B
We have investigated the transport and magnetic properties of the perovskite ${\mathrm{LaCo}}_{1\ensuremath{-}y}{\mathrm{Ni}}_{y}{\mathrm{O}}_{3},$ an alloy of ${\mathrm{LaCoO}}_{3}$ (a semiconductor that exhibits spin-state transitions) and ${\mathrm{LaNiO}}_{3}$ (a paramagnetic metal). The metal-insulator transition…
Magnetic and transport properties of perovskites and related materialsRare-earth and actinide compoundsAdvanced Condensed Matter Physics