Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
The processes of intrinsic and extrinsic luminescence excitation by synchrotron radiation of 4--40 eV or electron pulses have been studied in $\ensuremath{\alpha}\ensuremath{-}{\mathrm{Al}}_{2}{\mathrm{O}}_{3}$ single crystals at 8 K. The intrinsic A (7.6 eV) and E emissions (3.77 eV) can be effectively excited in the…
When an insulating material is subjected to electron irradiation, it produces a secondary emission the yield of which varies from a few percent to very high values (up to 24 per incoming electron) depending on the material and the experimental conditions. If the secondary electron emission yield is less than one, a ne…
In the course of plasma deposition of organic–polymeric thin films, radicals are incorporated into the growing film. These radicals initiate spontaneous oxidation reactions that continue over many weeks when the plasma polymers are stored in air. These reactions and their products have been previously studied in detai…
Several new approaches to biodegradable dendritic aliphatic block copolymers are described, including hyperbranched and dendrimer-like star structures. The hyperbranched polymers were obtained by the co-condensation of different AB 2 macromonomers. The macromonomers were prepared by ring-opening polymerization (ROP) o…
Poly(ethylene oxide)-b-poly(L-lactic acid) (PEO-PLLA) diblock copolymers were synthesized via a ring opening polymerization from poly(ethylene oxide) and l-lactide. Stannous octoate was used as a catalyst in a solution polymerization with toluene as the solvent. Their physicochemical properties were investigated by us…
Abstract An artificial lipid bearing a triethoxysilyl head and a dialkyl tail has been synthesized in order to prepare a novel type of organic-inorganic hybrid, “Cerasome”, which can form siloxane network on its vesicular surface. The Cerasomes were obtained upon vortex mixing of aqueous dispersion of the lipid follow…
We investigated a head-to-tail regioregularity of poly(3-alkylthiophenes) from 3-alkylthiophene by an oxidative coupling polymerization, which is the simplest and easiest way for the synthesis of polythiophenes. The polymerizations were conducted using ferric chloride (III) as an oxidant in chloroform. Investigating t…
ZnTe is an attractive material for various opto-electronic devices; however, conventional methods of preparation of nanocrystalline metal tellurides have the limitation of requiring noxious compounds, such as H2Te, or organometallic compounds. Here is reported a solvothermal synthesis for ZnTe, using Zn and Te, with h…
Nanopore arrays with 6×108–5×1010 cm−2 pore densities were fabricated by self-organized anodization on aluminum. A two-step anodization process was used to oxidize aluminum in oxalic, sulfuric, and phosphoric acid solutions. Hexagonally ordered pore arrays were obtained within domains of a few micrometers, which are s…
Sintered ceramic preforms with open pore volumes from 20% to 80% (with no alteration in sintering shrinkage) were developed by adding pyrolyzable pore‐forming agents (PFAs) to a tape‐casting colloidal suspension. Sintered porous characteristics were directly controlled by the amount, size, and distribution of the PFA…
Thin supported palladium membranes were prepared using electroless plating technique. The intrinsic plating kinetics were determined for hydrazine-based palladium plating baths. Mathematical models were developed to predict film thickness and plating rate as a function of plating parameters (i.e., reactant concentrati…
This volume on technetium is the third volume in a series of critical reviews of the chemical thermodynamic properties of elements of special importance to modelling efforts for the safety assessment of radioactive waste disposal systems, and is the only one concerned with a fission product element. The first two volu…
A tutorial review of the theory of curvature elasticity of thin films is presented with an emphasis on the physical origins of the bending energy. We begin with a discussion of surface curvature and focus on the role of special surfaces of curvature to show how such surfaces can be defined to eliminate either the coup…
The influence of the parameters of the deposition−precipitation method used to prepare Ni/SiO 2 samples on the size of nickel metal particles was investigated by temperature-programmed reduction, transmission electron microscopy, and thermogravimetry. The results show that the average metal particle size, which varies…
The domain nucleation and growth during polarization switching in Pb(Zr,Ti)O3 (PZT) ferroelectric thin film capacitors with Pt top (TE) and bottom electrodes (BE) were studied by means of atomic force microscopy (AFM). The experimental configuration used in this study differs from that conventionally used (AFM tip/PZT…
ABSTRACT Gelatin films were prepared by enzymatic cross‐linking with transglutaminase, and their mechanical and barrier properties were evaluated as functions of relative humidity (RH, 30 to 75%), temperature (15 to 35°C) and glycerol content (15 to 31%). Water and glycerol plasticized the films synergistically, resul…
By framework structures are meant materials consisting of relatively stiff units such as octahedra or tetrahedra, joined by shared oxygen (or other) atoms at the corners. Examples are ZrW 2 O 8 and many aluminosilicates. Rigid rotation of the units often gives a reduction of the volume or of some lattice constant as a…
Starting from the question, what fast electronic transport is based on, and why organic materials in general are more problematic in this respect than typical inorganic ones, methods are introduced that allow to measure the principal material property charge carrier mobility. Some representative experimental results a…
This paper presents the analysis of corrosion damages of metallic materials after application in waste fired boilers. The first part gives a description of corroded metallic specimens, collected from different grate fired plants in Germany and it will provide the base information for thermodynamic calculations and lab…
We revealed that the yield of SWNTs formed by Nd:YAG laser ablation depends on the target composition with yields following the order C x Ni y Co y > C x Ni y ≫ C x Co z . The SWNT bundles in the web formed when using the C x Ni y Co y target (web-C x Ni y Co y ) is thicker and longer than those in the web-C x Ni y .…