Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
An integration platform assembling with methanol reformer and high-temperature proton exchange membrane fuel cell (PEMFC) was constructed in this present. The methanol micro reformer combines with catalytic reaction section and reforming section. Catalytic reaction section with Pt calalysis maintains the constant temp…
This paper studied the stability and regeneration mechanism of photocatalyst Bi20TiO32. There is no change in the XRD of the catalyst after reaction, which indicates that photocatalyst Bi20TiO32 has stable structure. The comparison of XPS between used and fresh catalyst, shows that the major cause of the deactivation…
The layered Y-doped SnO2/C anode materials were prepared by a co-precipitation method. The physical properties of the Y-doped SnO2/C were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), and electrochemical measurements. XRD studies showed that the Y-doped SnO2/C has the same layered struct…
A coagulation method providing a better dispersion of nano-Antimony-Doped Tin Oxide (ATO) in a polymer matrix was used to produce nano-ATO/poly(methyl methacrylate) (PMMA) composites. Scanning electron microscopy showed an improved dispersion of nano-ATO in the PMMA matrix, which is a key factor to determine the compo…
The paper reports on an investigation of the fracture mechanism of both tensile and impact fracture in three types of casing-drilling steels. The results show that the tensile fracture surface of N80 steel includes fibrous zone, radiation area and shear lip zone, and those of both K55 and P110 steels include two zones…
The corrosion inhibition of 45# mild steel in 3%HCL solution by norfloxacin has been studied by weight loss measurement, Tafel polarization, electrochemical impedance spectroscopy (EIS) and quantum chemical study. The inhibitor of norfloxacin shows 93.2% inhibition efficiency at optimum concentration 400mg/L. The pola…
Reduced graphene sheets (RGSs) were prepared via hydrazine reduction of exfoliated graphite oxide and their morphology was characterized by atomic force microscopy. The electrocatalytic reduction of oxygen (O2) with RGSs was studied by cyclic and rotating risk electrode voltammetry using RGSs-modified glassy carbon el…
Polyaniline/attapulgite (PANI/ATP) nanocomposites doped by hydrochloric acid (HCl) were prepared by in-situ polymerization method. The structure and absorption mechanism for eriochrome blue black of nanocomposite were investigated. Amount of absorbent and influence of pH for absorbent effect were also studied. The res…
Microstructure and mechanical property of a hypoeutectic Al-Mg2Si composite processed by equal channel angular pressing up to eight passes in a combined route 2A+4BA+2A were investigated. The results show that the initial developed eutectic Mg2Si was significantly refined into submicrometer-scale particles and distrib…
The hot corrosion behavior of pure Co, Co-10Cr and Co-10Cr-5Al alloys coated with (4～4.5) mg/cm2 (Na, K)2SO4 deposits has been studied at 900 °C in air by thermogravimetry and SEM/EDX analysis. The results show that hot corrosion rate of Co-10Cr alloy was obviously higher than that of Co-10Cr-5Al alloy and hot corrosi…
The influence of deformation on dechromization of CuCr alloy in H3PO4 solutions was investigated by static immersion corrosion tests. The properties of undeformed and deformed alloys were characterised by XRD, Metallograph, SEM and X-ray fluorescence spectrometer respectively. It is observed that the deformation plays…
With science and standard of living progressing, functional textile become more and more popular. We reported that a new bamboo pulp fiber fabric with the chitosan modification (CMBPFF) was prepared by the selective oxidation of sodium periodate and then treatment with a solution of chitosan aqueous acetic acid. The r…
Fe-1.5Cu-1.5Ni-0.5Mo-0.3C alloy was prepared by powder metallurgy (P/M) warm compaction. Under the conditions of compaction pressures of 600 or 800 MPa and compaction temperature of 100 or 120°C , sintered in cracked ammonia atmosphere at 1120°C for half an hour, the researched alloy samples with higher properties cou…
Stable one component heat cured polyurethane-acrylate (PUA) sealants were synthesized using dicumyl peroxide (DCP) as an initiator with high decomposition temperature. The PUA sealants were synthesized through the reaction of hexamethylene diisocyanate (HDI) with poly(ethylene buthlene glycol adipate) and 2-hydroxyeth…
Preparation of amorphous silica using Zr-containing silica residue and the properties of the product have been studied. The results show that the separation of amorphous silica from Zr component can be realized using a process flow that pulping, grinding, washing and solid-liquid separation. The main constituent of th…
The precipitates of bending-age-formed ternary Al-4.31Cu-1.51Mg alloy were studied with load of 6.05 kg aged at 190°C. Transmission electron microscopy and electron diffraction has been used to observe the microstructures of the bend-age-formed alloy. The results show that there is no preferential alignment of S phase…
In this study, composite films were prepared with Konjac glucomannan (KGM) and Starch, In the process of preparation, add Lactic acid as modifier, deal with Ammonia as crosslinker. Pretreatment with microwave, and used solvent (water) casting method to prepare the KGM/starch composite films, and used orthogonal matrix…
A two-layer structure composite based on B4C/Al-B4C/TiB2was prepared using hot pressing and infiltration aluminum in vacuum. The results showed that the B4C porous layer in the two-layer preform looked like a three-dimensional network of interconnected capillaries which could promote the infiltration of liquid aluminu…
Nano-hydroxyapatite (n-HAP) surface-grafting poly(L-lactide) (g-HAP) was synthesized by ring-opening polymerization ofL-lactide (L-LA) using stannous octoate as initiator andn-HAP as co-initiator under microwave irradiation. An optimal reaction condition was obtained as follows: temperature of 140 °C, irradiation time…
Agricultural waste such as sugarcane bagasse is abundant in Malaysia and at present is mainly used as combustible material for energy supply in the sugar factory. This study was conducted to investigate the possibility of manufacturing composite panel from sugarcane bagasse at three density levels (450, 550, 650 kg/m3…