Materials Literature

文献浏览

按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。

清除
第 265780 / 288569 页 · 当前展示 5,315,581–5,315,600 / 5,771,370 条匹配结果 · 摘要仅作预览

The Effect of Mechanical Alloying Time on Microstructure and Electromagnetic Properties of Flaky FeSiAlCr Powders

Zou Bing-fei2011-01-01Xihua Daxue xuebao. Zhexue shehui kexue ban

FeSiAlCr powders were prepared by mechanical alloying(MA) with analytical-purity Fe,Si,Al and Cr powders.The morphology and microstructure of as-milled powders were investigated by SEM and XRD respectively.Electromagnetic parameters were measured with a microwave vector network analyzer,and reflectivities of the powde…

Electromagnetic wave absorption materialsMicrowave-Assisted Synthesis and Applications

Palladium-polyoxometalates-catalyzed C-C Bonds Formation

Qian Song2011-01-01Journal of Fujian Normal University

Palladium-polyoxometalate was synthesized,and its use as catalyst for C-C formation via C-H bonds functionalization including oxidative coupling of benzene with styrene and oxidative coupling of aryl compound with aryl compound was also examined.From the examination of the catalyst performance,it was found that the ca…

Catalytic Cross-Coupling ReactionsPolyoxometalates: Synthesis and ApplicationsOxidative Organic Chemistry Reactions

Nanotechnology applications in cancer therapy

Zhang Li2011-01-01Anhui Medical and Pharmaceutical Journal

Nanotechnology,as a leading technology,is recently developed after the information and biotechnology.It has been widely applied in the area of cancer diagnosis and treatment.As nanotechnology has a lot of theoretical significance and broad application prospects,this paper reviews and discusses the studies on the nano-…

Nanoparticle-Based Drug DeliveryGraphene and Nanomaterials Applications

Design and Application of Inductors for Machine Tool Parts

Wen Xin-lin2011-01-01The Heat Treatment

Taking the induction hardening of several typical machine tool parts as an example,the design and selection of inductors were analyzed,including configuration of induction coils suitable to heating various machine tool parts or the given areas of parts and the heating effectiveness,determination of inductor winding,po…

Metallurgy and Material FormingMetal Alloys Wear and PropertiesInduction Heating and Inverter Technology

Properties of W-Mo co-doped In_2O_3 thin films grown by electron beam deposition

Ying Zhao2011-01-01Journal of Optoelectronics·laser

Structural,optical and electrical properties of tungsten(W) and molybdenum(Mo) co-doped indium oxide(IMWO) films prepared by electron beam deposition technique with different WO3-MoO3 co-doped concentrations are investigated in detail.The IMWO thin films present pyramid-like surface.With the co-doped concentration inc…

Gas Sensing Nanomaterials and SensorsPlasma Diagnostics and ApplicationsTransition Metal Oxide Nanomaterials

The influence of the current density on the coating properties on the magnesium with rare earth

Shichun Di2011-01-01Modern Manufacturing Engineering

Under the same conditions,the magnesium alloy with rare earth was treated by micro arc oxidation,and the influence of the current density on the coating properties including the thickness,hardness,insulation and resistance to corrosion of the coating was researched.The results show that the thickness and hardness of c…

Magnesium Alloys: Properties and Applications

Effect of Component Activity on Coloration Feature of Hot-Dip Galvanization Bath

Jianzhong Cui2011-01-01Journal of Northeastern University

The special color coating on steel sheets or members could be obtained in hot galvanization processing while the bath contains some transitional elements together with the cooling control.Understanding its coloration mechanism from a thermodynamic point of view is helpful for further bath composition optimization due…

Corrosion Behavior and InhibitionInduction Heating and Inverter TechnologyMaterial Selection and Properties

Synthesis,crystal structure and magnetic properties of {[Ni_4(nic)_8(H_2O)_2]·3H_2O}_∞(Hnic=nicotinic acid)

Shiping Yang2011-01-01Journal of Shanghai Normal University

A complex,{[Ni4(nic)8(H2O)2]·3H2O}∞,(Hnic=nicotinic acid),has been synthesized through the Ni2+ salt reacting with nicotinamide under hydrothermal conditions and characterized by EA,IR,TG and single crystal x-ray diffraction.Crystal data:monoclinic,space group P2(1) with a=10.7566(8),b=19.5438(15),c=13.7801(10),β=104…

Metal-Organic Frameworks: Synthesis and ApplicationsMagnetism in coordination complexesCatalysis and Oxidation Reactions

Optimum synthesis of waterborne acrylic resin for photoresist dry film

Daiyong Ye2011-01-01Thermosetting Resin

The waterborne acrylic resins for photoresist dry film were synthesized using MMA,BA and AA as main materials.The effects of the initiator content,dropping time of initiator,hydrophilic functional monomer AA content,soft monomer BA content and neutralization degree on the water-solubility and molecular weight of the r…

Surface Modification and SuperhydrophobicitySilicone and Siloxane ChemistryPhotopolymerization techniques and applications

AC PM Servo Motor Air-gap Magnetism Density Optimal Design

NC Equipment2011-01-01Electrical Machinery Technology

The two-dimensional motor model was analyzed by means of the finite element simulation software.The influence on the air-gap magnetic density of AC PM Servo motors by the magnetic steel eccentricity,pole embrace and air-gap length was studied and calculated.The reasonable design of the various parameters made it possi…

Electric Motor Design and AnalysisMagnetic Properties and ApplicationsMagnetic Bearings and Levitation Dynamics

Research advances of sol-gel technology based cordierite material synthesis

Tian Qing-bo2011-01-01Shandong kexue

Sol-gel technology synthesized cordierite material has such positives as low thermal expansion coefficient,low dielectric properties and high chemical stability,so such material can be widely applied in electronic components and low-temperature thermal radiation materials.This paper surveys the influences of technolog…

Advanced ceramic materials synthesisMesoporous Materials and CatalysisAerogels and thermal insulation

Effect of Heat Treatment on Structure and Mechanical Properties of AZ91D and AZ71 Magnesium Alloys

Yinghui Wei2011-01-01Cailiao daobao

The effects of heat treatment process on microstructure and mechanical properties of AZ91D and AZ71 magnesium alloy were studied.The results show that in AZ91D and AZ71 magnesium alloy,with the increase of heat treatment temperature,β-phase of the materials both increase first and then decrease,β-phase in the alloys d…

Magnesium Alloys: Properties and ApplicationsAluminum Alloy Microstructure PropertiesAluminum Alloys Composites Properties

Generation of carbon and oxygen in CZ elemental crystal furnace and the influence of monocrystalline silicon growth

Zeng Jian-ping2011-01-01Ningxia Engineering Technology

In this paper,elemental crystal furnace,FT-CZ2008 type,made in Ferro Tec group,is research object.The basic structure of CZ elemental crystal furnace is introduced,and the growth techniques of monocrystalline silicon are expounded.Influence factors of carbon and oxygen generating in this system is analyzed from 3 aspe…

Solidification and crystal growth phenomenaMetallurgical Processes and Thermodynamics

The Chiral Metamaterial and Its Strong Optical Activity and Negative Refractive Index

Jianfeng Dong2011-01-01Cailiao daobao

The basic principle of negative refractive index in chiral metamaterial is introduced.The structure models of several chiral metamaterials are described.The research advances of the optical activity,circular dichroism and negative refractive index for the chiral metamaterials in microwave region,infrared and visible l…

Metamaterials and Metasurfaces ApplicationsOptical and Acousto-Optic Technologies

Study on Cellulose Extraction from Sugar Beet Pulp

Zhiyong Liu2011-01-01OpenAlex

The extraction of cellulose from beet pulp in Xinjiang beet sugar factory was studied with alkali solution.Various extracting factors influencing the yield of the cellulose product are discussed.The optimal conditions were obtained by orthogonal experiment as follows:10 % of the concentration of NaOH,65℃ of the extrac…

Biofuel production and bioconversionAdvanced Cellulose Research Studies

The First-Principles Study of Structural and Elastic Properties of TiN with Pressure Effect

Shang Xin-hua2011-01-01Journal of Jiangxi Normal University

The structural properties of TiN in cubic and hcp phase are studied by first-principles calculation.The calculated E-V curves are used to predict the phase transition of cubic to hcp phase.Additionally,the elastic constants are calculated via the efficient stress-strain method.The present results agree well with exper…

GaN-based semiconductor devices and materialsAdvanced ceramic materials synthesisMetal and Thin Film Mechanics

Test Methods and Susceptibility of Low-Cr Ferritic Stainless Steel to lntergranular Corrosin

Xiaohua Wang2011-01-01Physical Testing and Chemical Analysis

The test methods and susceptibility of explosion composite plate compound layer 06Cr13R low-Cr ferritic stainless steel to intergranular corrosion were studied.The results show that the double-loop EPR method was appropriate for evaluating the susceptibility of 06Cr13R low-Cr ferritic stainless steel to intergranular…

High-Temperature Coating BehaviorsHydrogen embrittlement and corrosion behaviors in metalsCombustion and Detonation Processes

Simulation Analysis of High Voltage Bushing Insulation Status Detection Using Frequency Response Anslysis Method

Chen Yuan-qing2011-01-01Gao dianya jishu

In recent years,there are many bushing faults in the power grid,which have brought heavy loss to the national economy and raised great attention of the power operation and maintenance department's concern,so it is important and urgent to do some research on the inner insulation status of high voltage bushing.This pape…

High voltage insulation and dielectric phenomenaPower Systems Fault DetectionThermal Analysis in Power Transmission

Research Progress of Super Thin Fire Retardant paints for Steel Structure

Zhang Fa-yu2011-01-01Plating and Finishing

The steel structures have developed quickly because of their superior advantage.Fire retardant paints attached to the steel structure are also spread widely.The current research situation of fire proofing coatings for steel structure was reviewed,and the development trend and prospect of ultra thin fire proofing coati…

Flame retardant materials and properties

Influence of DC current annealing on the giant magneto-impedance effect of Co_(68)Fe_(4.5)Si_(13.5)B_(14) microwires

WU Wei-dong2011-01-01Journal of Magnetic Materials and Devices

Influence of current annealing on the giant magnetoimpedance(GMI) effect of Co68Fe4.5Si13.5B14 microwires was studied.The result showed that,for annealing current of 30mA,the GMI effect and its magnetic field sensitivity of metal wire increase with extending current annealing time.The maximum GMI ratio of 142.2% and r…

Microstructure and Mechanical Properties of SteelsMetallic Glasses and Amorphous AlloysMagnetic Properties and Applications