邢惠红、李驰、王标兵 等 4 位作者2011-01-30OpenAlex
The polylactic acid/tetrapod-like Zinc oxide whiskers (PLA/T-ZnOw) polymer blend was prepared by melt blending. The isothermal cold crystallization and the following melting behavior of PLA/T-ZnOw were investigated in the temperature 90~130℃ by differential scanning calorimetry (DSC). The Avrami equation was used to a…
biodegradable polymer synthesis and properties
王晓楠、左斌2011-01-30OpenAlex
Taking CaTiO3 as the substrate and doping Zn(superscript 2+) ions, the nano-powder of Zn0.2Ca0.8TiO3:Pr was synthesized by Sol-gel method. Its structure, morphology and fluorescent properties are characterized by XRD, TEM, emission and excitation spectra and other test methods. The results show that, Zn0.2Ca0.8TiO3: P…
Luminescence Properties of Advanced Materials
Mino R. Caira、Dyanne L. Cruickshank、Susan A. Bourne2011-01-30ARKIVOC
New crystalline inclusion complexes between the urea herbicide cycluron (3-cyclooctyl-1,1dimethylurea) and three methylated cyclodextrins (CDs), namely permethylated -CD (TRIMEA), permethylated -CD (TRIMEB) and dimethylated -CD (DIMEB), were isolated and studied by single crystal X-ray diffraction and thermal analysis…
Analytical Chemistry and ChromatographyProtein purification and stabilityPolymer Synthesis and Characterization
M. K. Aouf、T. M. Seoudy2011-01-30European Journal of Pure and Applied Mathematics
In this paper, we obtain some applications of first order differential subordination and superordination results involving a linear operator and other linear operators for certain normalized analytic functions. Some of our results generalize previously known results.
Holomorphic and Operator TheoryCrystal Structures and PropertiesAnalytic and geometric function theory
J.K. Koo、J.M. Kim、D.H. Ryua 等 10 位作者2011-01-30Applied Science and Convergence Technology
자기조립화된 Fe/Au 이중층 위에 $L1_0$ 형 구조를 갖는 FePd 나노 점을 성공적으로 제작하였다. AFM를 이용하여 초기에 편평한 Fe/Au 이중층 박막이 온도가 증가함에 따라서 응집되어 나노 점 구조로 변형되는 것을 확인하였다. 또한 형성된 이중층위에 FePd 다층막을 $300^{\circ}C$ , $350^{\circ}C$ , $400^{\circ}C$ , $450^{\circ}C$ 에서 각각 증착하였다. 초격자 구조를 갖는 FePd 다층막의 표면형상은 응집현상에 의하여 자기조립화된 이중층의 형상과 유사하였다. XRD 측정결과, $350^{\circ}C…
Magnetic properties of thin filmsCopper Interconnects and ReliabilityAnodic Oxide Films and Nanostructures
Anju Kurup、A.V. Ramach2011-01-30Journal of Developmental Biology and Tissue Engineering
Since growth factors exert control over various cellular events during development and as information in this regard on regenerative growth are scant, the present study has evaluated the effect of exogenous in loco administration of EGF, TGF-β and NGF during the first few days post-autotomy on the course of tail regen…
Osteoarthritis Treatment and MechanismsTendon Structure and TreatmentSilk-based biomaterials and applications
Ho Lee、Jinhoon Song、Ki‐Joong Kim 等 7 位作者2011-01-30Korean Chemical Engineering Research
고분자전해질 연료전지에 유입되는 공기가 톨루엔에 오염되었을 때 전지 성능에 미치는 영향을 여러 톨루엔 농도와 운전 조건에서 연구하였다. 그리고 청정한 공기에 의한 전지 성능 회복과 활성탄 흡착에 의한 공기 중 톨루엔의 제거에 대해서도 연구하였다. 본 연구에서 실험한 톨루엔의 농도 범위는 0.1~5.0 ppm이었고 전지 성능감소와 회복은 일정전류에서 전압변화 측정법과 전기화학적 임피던스 측정법(EIS)에 의해 측정하였다. KOH 첨착활성탄의 톨루엔 흡착용량은 등온흡착곡선으로 구했다. 톨루엔 농도가 증가할수록, 전류밀도가 증가할수록, 공기유량이 증가할수록 톨루엔 오염에…
Electrocatalysts for Energy ConversionFuel Cells and Related MaterialsConducting polymers and applications
Sang‐Woo Pak、Joo-Young Suh、Dong Uk Lee 等 4 位作者2011-01-30Applied Science and Convergence Technology
열처리 방식을 통하여 형성된 FePt 나노 입자를 사용하는 자기 양자점 소자를 제작하고, 전기적 및 자기적 특성을 연구하였다. FePt 자기 양자점 터널링 소자는 p 형 Si 기판 상부에 약 20 nm의 $SiO_2$ 터널 절연막을 형성하고 FePt 박막을 3 nm 두께로 증착한 후에 열처리 방식을 이용하여 8~15 nm 크기의 양자점을 갖는 구조이다. 터널링 소자의 전류-전압 특성을 자기장과 온도 변화에 따라 관찰하였고 특히, 저온에서 비선형적인 전류-전압 곡선을 확인하였으며 이러한 단전자 수송현상을 전자의 hopping 모델과 양자점의 터널링 현상을 이용하여 설…
Magnetic properties of thin filmsMagnetic Properties and ApplicationsSurface and Thin Film Phenomena
Seong-Moon Song、Back-In Seong、Ji-Hoi Koo 等 4 位作者2011-01-30Korean Chemical Engineering Research
탄산칼슘의 Biomineralization 반응을 수행하기 위해 aspartic acid와 lysine을 $CaCl_2$ 용액에 첨가하여 기-액 반응으로 염화칼슘과 $NH_4HCO_3$ 을 사용하여 탄산칼슘 결정화 실험을 하였다. 결정화 반응시간, aspartic acid와 lysine의 첨가양, $CaCl_2$ 의 양, $NH_4HCO_3$ 의 양을 변경하여 탄산칼슘 결정의 다형체인 calcite와 vaterite의 비를 조사하였다. 결정 분석을 수행하기 위해 FT-IR spectrometer(model IR Prestige-21, Shimadzu, Kyoto,…
Calcium Carbonate Crystallization and InhibitionCrystallization and Solubility Studies
Avelino Corma2011-01-30Arbor
No disponible
Zeolite Catalysis and SynthesisMesoporous Materials and CatalysisCatalysis for Biomass Conversion
M. R. Setare、D. Jahani2011-01-30International Journal of Modern Physics B
We examine the effect of a magnetic field that varies inversely as the square of distance on the Dirac fermion spectrum of graphene, a single layer of graphite. We find that unlike the case of the uniform magnetic field for which zero-energy modes exhibit half the degeneracy of the other levels in the energy spectrum,…
Graphene research and applicationsQuantum and electron transport phenomenaTopological Materials and Phenomena
Won-Hyun Eom、Kyung-Seun Yoo、Sung-June Kim2011-01-30Korean Chemical Engineering Research
하이브리드 SNCR-SCR 공정의 질소산화물 저감특성을 파일럿 규모의 흐름반응기를 이용하여 고찰하였다. SNCR 공정의 질소산화물 저감효율은 $970^{\circ}C$ 에서 80% 수준이었으며 하이브리드 SNCR-SCR 공정은 NSR = 2.0, $940{^{\circ}C}$ 에서 92%의 저감율을 보였다. SNCR 단일 공정과 비교할 때, 하이브리드 SNCR-SCR 공정은 $940^{\circ}C$ 보다 낮은 저온영역에서 보다 효과적이었다. 암모니아 유출농도는 비교적 높은 공간속도조건에서 1 ppm 이하로 유지되었으며 요구되는 촉매양은 SCR 단일공정과 비교할 때…
Advanced Combustion Engine TechnologiesCatalytic Processes in Materials ScienceBiodiesel Production and Applications
Jung‐Eun Park、Jae‐Hyun Park、Sung‐Dae Yim 等 5 位作者2011-01-30Korean Chemical Engineering Research
메탄올 수증기 개질반응에 대한 적용가능성을 파악하기 위하여 메탄올 합성용 촉매인 ICI-M45와 수성가스 전환반응용 촉매인 MDC-3와 MDC-7을 비교 연구하였다. 또한 수성가스전환 반응에 대한 세 촉매의 비교실험도 수행하였다. 그 결과 MDC-7이 메탄올 수증기 개질반응에서 가장 높은 전화율을 보였으며, $H_2$ 와 $CO_2$ 생성속도 또한 높게 나타났다. 수성가스 전환반응용 촉매인 MDC-7과 메탄올 합성촉매인 ICI-M45를 이용하여 촉매 충진 방법에 따른 메탄올의 전화율에서의 변화를 살펴본 결과, MDC-7 단독보다 낮은 메탄올의 전화율을 보였다. 수성…
Catalytic Processes in Materials ScienceCatalysts for Methane ReformingEnvironmental remediation with nanomaterials
Suk-Hwan Kang、Jae-Hong Ryu、Soo-Nam Park 等 10 位作者2011-01-30Korean Chemical Engineering Research
인도네시아 아역청탄인 ABK탄과 중국 갈탄(lignite)과 같은 저급탄에 대한 열분해와 촤- $CO_2$ 가스화반응에 대한 실험을 비등온의 승온 조건에서 열중량분석기(Thermogravimetric analysis, TGA)를 이용하여 수행하였다. 열분해 속도는 2단계, 1차의 열분해 모델(Kissinger 법의 변형)에 의해 잘 모사되었다. 촤의 $CO_2$ 가스화반응은 수축 핵 모델에 적용하여 초기의 활성화 에너지가 ABK탄은 189.1 kJ/mol, lignite는 260.5 kJ/mol의 값을 얻었으며, 수축 핵 모델에 의해 잘 모사되었다. 특히, 촤의 $…
Thermochemical Biomass Conversion ProcessesIron and Steelmaking ProcessesGraphite, nuclear technology, radiation studies
Gilles Damamme、A. Aoufi2011-01-30InTech eBooks
Two-Fluxes and Reaction-Diffusion Computation of Initial and Transient Secondary Electron Emission Yield by a Finite Volume Method
X-ray Spectroscopy and Fluorescence AnalysisLaser-induced spectroscopy and plasmaElectron and X-Ray Spectroscopy Techniques
Miyoung Kim、Gon Seo、Jung‐Hyun Park 等 5 位作者2011-01-30Korean Chemical Engineering Research
티타니아, 바나디아, 지르코니아, 세리아를 고정한 실리카에 백금을 담지한 후 과산화수소로 처리하여 제조한 백금 촉매에서 산화물 고정과 과산화수소 처리가 백금의 분산 상태 및 일산화탄소 산화반응에서 이들의 촉매 활성에 미치는 영향을 조사하였다. 산화물을 고정하고 과산화수소로 처리하면 실리카에도 백금이 잘 분산될 수 있음을 XRD, TEM, EXAFS, XPS, 일산화탄소 화학흡착 방법으로 검증하였다. 그러나 일산화탄소의 흡착성질과 일산화탄소 산화반응에서 촉매 활성은 고정한 산화물 종류에 따라 상당히 달랐다. 티타니아, 지르코니아, 세리아를 실리카에 고정하고 과산화수소…
Catalytic Processes in Materials ScienceCatalysis and Hydrodesulfurization StudiesCatalysis and Oxidation Reactions
Chae-Yoen Kang、Yun-Sung Shin、Jong-Dae Lee2011-01-30Korean Chemical Engineering Research
철 이온 교환방법에 의해 메조기공을 갖는 활성탄소 섬유(ACF)를 제조하고, 이를 사용하여 전기 이중층 커패시터(EDLC)의 전극소재 성능을 조사하였다. 질산처리에 의해 제조된 메조기공 ACF는 비표면적이 1,249, 664 $m^2/g$ 이고, 메조 기공 분율이 70.6-81.3%이고, 평균 기공크기는 약 2.78~4.14 nm이다. 질산처리시간이 짧을수록 비표면적이 크고 메조 기공이 적게 발달됨을 알 수 있었다. 전기이중층 커패시터의 성능을 조사하기 위해서, 메조기공 ACF, 도전제, 바인더를 사용하여 단위 셀을 제조하였으며, 유기 전해질을 사용하였다. 2시간…
Supercapacitor Materials and FabricationConducting polymers and applicationsMesoporous Materials and Catalysis
Nasmi Herlina Sari、S. Sinarep2011-01-30Dinamika Teknik Mesin
The development of composite materials in the field of engineering is increasingly being used. This is because of its properties are superior compared to conventional materials, as the ratio between strength and density are quite high, stiff, the manufacturing process is very simple and resistant to corrosion and fati…
Mechanical Engineering and Vibrations ResearchMaterial Selection and PropertiesEnvironmental Engineering and Cultural Studies
Kimberly DeLong、V. Judson Harward、Philip Bailey 等 6 位作者2011-01-30International Journal of Online and Biomedical Engineering (iJOE)
Students at MIT have traditionally executed certain experiments in the containment building of the MIT nuclear reactor as part of courses in Nuclear Engineering and the third year laboratory course for Physics majors. A joint team of faculty and research staff from the MIT Nuclear Reactor Laboratory (MIT-NRL) and MITâ…
Radiation Detection and Scintillator TechnologiesNuclear Physics and ApplicationsGraphite, nuclear technology, radiation studies
Josep R. Medina、M. Esther Gómez-Martín、Antonio Corredor2011-01-30Coastal Engineering Proceedings
The handling procedure and placement grid of concrete armor units (CAUs) are the key construction factors of armor layers. This paper analyzes conventional cube and Cubipod CAUs which are handled by pressure clamps and placed randomly. Two methodologies for small-scale blind construction of armor layers in laboratorie…
Fluid Dynamics Simulations and InteractionsHigh-Velocity Impact and Material BehaviorTransportation Safety and Impact Analysis