Wang Yan-hua2011-01-01Power System Protection and Control
All the approaches applied now in the field of grounding grid corrosion diagnosis are analyzed,and a theory based on dynamic chaotic PSO is proposed.Such an approach aiming at abnormal topological structure divides the whole grid into regular small parts,and uses circuit theory to construct the equation of diagnosis.A…
High voltage insulation and dielectric phenomenaSmart Grid and Power SystemsHigh-Voltage Power Transmission Systems
Ping Qin2011-01-01Materials Science and Technology
To evaluate welded joint defects qualitatively and quantitatively,the signal characteristics of metal magnetic memory(MMM) is investigated by comparing experiments between weld lacking of penetration and weld slag inclusion.The experiments were carried out on DSS-10T-S tension testing machine.Given are the MMM signal…
Magnetic Properties and ApplicationsNon-Destructive Testing TechniquesGeoscience and Mining Technology
Wenbo Zhao2011-01-01Bandaoti guangdian
The fabrication of microlens array based on glass was studied and three factors of glass composition,etching method and mask material that affect the fabrication were introduced.The effects of the three factors were verified by experiments.According to the analysis,microlens array that meet the claims was manufactured…
Advanced optical system designOptical Coatings and GratingsOptical Systems and Laser Technology
Wu Li2011-01-01Xiandai shengwu yixue jinzhan
Objective:To implant bovine jugular vein conduit containing living autologous cells into the canine pulmonary artery and to observe the influence in vivo environment.Methods:Tissue-engineered right ventricular valved conduit was constructed in vitro using the decellularized bovine jugular vein as the scaffolds,the can…
Congenital Heart Disease StudiesElectrospun Nanofibers in Biomedical ApplicationsTissue Engineering and Regenerative Medicine
Yanhua Hu2011-01-01Pressure vessel Technology
Serial cracks occurred at head when performing hydrostatic test.By using NDE,material analysis and microscope,the macro-surface of the broken head and metallurgical structure,corrosion body were analyzed.The analytical result shows that the major cause of the failure is the stress corrosion due to the combined effect…
Hydrogen embrittlement and corrosion behaviors in metalsMechanical stress and fatigue analysisMechanical Failure Analysis and Simulation
Zhonghe Shui、Cccc Wuhan2011-01-01OpenAlex
Carbonation resistance of concrete is an important part of concrete durability.This paper mainly studies the complex mixed with ex-pansive agent and fly ash on the carbonation resistance of concrete discipline,and analyzes microstructure changes of concrete before and after car-bonation by mercury intrusion analysis,t…
Concrete and Cement Materials ResearchAdvanced ceramic materials synthesisInnovative concrete reinforcement materials
Zheng Yi2011-01-01Hecheng huaxue
Two photo-active ATRP initiators,4-bromomethylbenzophenone and 4,4′-di(bromomethyl)benzophenone,were selectively synthesized in 91% and 46% yields using urea hydrogen peroxide adduct and aqueous HBr as bromination agents from 4-methylbenzophenone and 4,4′-dimethylbenzophenone,respectively.The structures were confirmed…
Photodynamic Therapy Research StudiesPhotochromic and Fluorescence ChemistryPhotopolymerization techniques and applications
Qilong Yuan2011-01-01Suxing gongcheng xuebao
High-speed cold roll-beating forming technique is a new near-net plastic forming method with intermittent high-speed roll-beating being used to achieve dynamic impact local loading.It's a complex forming process with high speed,transient state,high impact,and large deformation.Slab method was employed to derive an ana…
Metal Forming Simulation TechniquesMetallurgy and Material FormingMetal Alloys Wear and Properties
Yu Li2011-01-01OpenAlex
Aliphatic polyurethane(PU) and hydroxyapatite(HA) composite scaffolds were prepared by in-situ polymerization and gas self-foaming process.The morphologies and properties of the scaffolds were studied by varying the contents of HA,foaming agent(water) and soft/hard segment ratio and characterized by scanning electron…
Bone Tissue Engineering Materialsbiodegradable polymer synthesis and propertiesElectrospun Nanofibers in Biomedical Applications
MA Sheng-li2011-01-01Railway Locomotive & Car
FEA is used to study the gasket seals about diesel engine in this paper.To evaluate the seals,the contact press and deformation is simulated by Abaqus.Finally the method to improve the seals is provided.
Tribology and Lubrication EngineeringMetal Alloys Wear and PropertiesEngineering Structural Analysis Methods
Ming Zhang2011-01-01Ranliao huaxue xuebao
The effects of Na2CO3 addition on the selective non-catalytic reduction(SNCR) using ammonia solution or urea solution were investigated in a quartz tube reactor.The experimental results show that the addition of a little amount of Na2CO3 can improve the NOx reduction efficiency effectively in the low-temperature regio…
Catalytic Processes in Materials ScienceIndustrial Gas Emission ControlIndustrial Technology and Control Systems
Nan Yan、Fan Weihao、Yaokun Ye2011-01-01Initiators & Pyrotechnics
In order to meet the higher requirement of spacecraft stage separation system in installation volume,separation time and synchronization error,a new explosively releasable device with axial length of 64mm,maximum diameter of 16mm has been designed based on SCB(semiconductor bridge)ignition technology.Through connectio…
Energetic Materials and CombustionCombustion and Detonation ProcessesHigh-Velocity Impact and Material Behavior
Gao Li2011-01-01OpenAlex
OBJECTIVE To prepare Pluronic P123 polymeric micelles system loaded with itraconazole(ITZ).METHODS ITZ loaded Pluronic P123 micelles were prepared by thin-film hydration method.The main factors affecting the drug-loading coefficient and encapsulation ratio were studied by single factor analysis and central composite d…
Nanoparticle-Based Drug Delivery
Li Xia2011-01-01Nanotechnology and Precision Engineering
The membranes of sulfonated polyether ether ketone(SPEEK) with the degree of sulfonation(DS) of 48.3%,doped with nanometer cerium oxide(CeO2) were prepared for direct methanol fuel cell application by solution casting technique.The proton conductivity of SPEEK/CeO2 composite membranes increased with the increasing of…
Fuel Cells and Related MaterialsConducting polymers and applicationsAdvanced Battery Technologies Research
Jiang Hong-wei2011-01-01China Plastics Industry
On the basis that the mixture of AEP and MEP was used as flame retardant in ABS resin,a small amount of montmorillonite(MMT) was added as a synergistic agent,and the flame retarded ABS composite ex-hibited excellent flame retardancy,mechanical properties and processing properties.When the mass ratio of AEP,MEP and MMT…
Flame retardant materials and properties
Dong Wei2011-01-01OpenAlex
Li_2O-Al_2O_3-SiO_2(LAS) glass-ceramics doped with CeO_2 and Nd_2O_3 were prepared by the meltingcrystallization technique.The effects of Ce~(4+),Nd~(3+) doping on the crystallization behavior,structure and optical properties of the LAS glass-ceramics were studied by differential thermal analysis tester,X-ray diffract…
Glass properties and applicationsPigment Synthesis and Properties
Yang Chun2011-01-01Energy Engineering
The effects of temperature and particle size on conversion rate of Si3N4 were studied by TG in which silicon particles of three different size were used,and the products were analyzed using XRD method to acquire the conversion rate curve of nitridation.The results indicated that silicon and nitrogen reacted at 1000~11…
Advanced ceramic materials synthesis
Xiaoyan Liu2011-01-01Cailiao rechuli xuebao
Effects of single aging,duplex aging and retrogression and reaging(RRA) treatments on microstructure and mechanical properties of the Al-Zn-Cu-Mg-Zr alloy containing Sc were studied by means of transmission electron microscopy,tensile test and conductivity measurement.The results show that after duplex aging of 120 ℃×…
Aluminum Alloy Microstructure PropertiesAluminum Alloys Composites PropertiesAnodic Oxide Films and Nanostructures
Wang Ju-wei2011-01-01Applied Mechanics and Materials
This paper aims to present the results of our observation of the diurnal variations of monoterpenes emitted from Pinus tabulaeformis in a smoke chamber.The observational and experimental analysis has been done by us with the gas chromatography for the monoterpene analysis and an ozone analyzer for the ozone concentrat…
Atmospheric chemistry and aerosolsCatalytic Processes in Materials ScienceCatalysis and Oxidation Reactions
Xu Haibing2011-01-01Textile Research Journal
An investigation of the wearability of PTT/PLA/Rayon blended fabric tested the strength and hairiness of the ten kinds of PTT/PLA/Rayon blended yarns with different fiber contents,followed by testing the color fastness to dry and wet rubbing,pill resistance,crease recovery,moisture permeability of corresponding ten be…
biodegradable polymer synthesis and propertiesTextile materials and evaluations