Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Carbon nanotubes (CNTs) are now well-established as efficient channels for field-effect transistors (FETs). Logic circuitry based on CNTs have until now been demonstrated by replacing the silicon channel of a conventional metal-oxide-semiconducutor FET by a CNT. We propose a circuit design utilizing the ambipolarity o…
Watch your step! The individual steps during the chlorination of [Al13]− clusters via [Al11]−, [Al9]−, and [Al7]− intermediates (see picture) can be “visualized” by means of Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometry. The reaction can be interpreted as a model reaction for the chlorination of…
Nonlinear characteristics of the Fowler–Nordheim (F–N) plot for field emission from In2O3 nanowires (NWs) is investigated. The field emission from the aligned and nonaligned In2O3 NWs are measured and a stable emission with fluctuations less than 10% was obtained for the aligned In2O3 NWs. It is found that the nonalig…
The physical properties of a wide range of nonchiral single-walled carbon nanotubes (SWNT) and double-walled carbon nanotubes (DWNT) with nonchiral commensurate walls are studied. Equilibrium structures of SWNT and DWNT, as well as the interwall interaction energies of DWNT, are computed using a local density approxim…
Abstract The adsorption isotherms of water vapor on super absorbent product have the same form of type III isotherm at ambient temperature with the hysteresis phenomena. For temperatures lower than ambient, the isotherms become deformed because of the chains effect. The polymer is characterized by a multilayer adsorpt…
Theoretical results for (FeCo)Si substitutional random alloys, obtained within the framework of the exact muffin-tin orbitals method in combination with the coherent potential approximation, are presented. For concentration range $0.1<x<0.9$, the magnetic structure of ${\mathrm{Fe}}_{1\ensuremath{-}x}{\mathrm{Co…
Ti 3 SiC 2 ∕ Hydroxyapatite composites were prepared by spark plasma sintering. The effective dc conductivity and dielectric behavior of the composites were studied. The percolation theory was applied to demonstrate the dielectric behavior of the composites. The experimental results showed that the dielectric constant…
Abstract To improve their dyeing and colorfastness properties, degummed Bombyx mori silks were chemically modified by a grafting technique with either methyl methacrylate (MMA) monomer or methacrylamide (MAA) monomer. Both commercial synthetic dyes, that is, acid and basic dyes, and natural dyes extracted from turmeri…
Abstract The nonisothermal crystallization of poly(ethylene‐ co ‐glycidyl methacrylate) (PEGMA) and PEGMA/clay were studied by differential scanning calorimeter, at various cooling rates. Avrami model modified by Jeziorny, Ozawa mode and Liu model could successfully describe the nonisothermal crystallization process.…
Bragg reflection gratings are holographically recorded in polymer-dispersed liquid crystal materials by using the 632.8-nm wavelength of the He-Ne laser. Mixtures of the commercially available E8 nematic liquid crystal, pentafunctional monomers, and photooxidant dye methylene blue are employed. We demonstrate that Bra…
Abstract Tests of the strain sweep, frequency sweep, and stress relaxation for raw epoxidized natural rubber were carried out with a rubber processing analyzer. The results showed that the complex viscosity, η*, decreased with the prolongation of the aging time in the region of Newtonian flow, but in the region of non…
Abstract In this paper, crystallization of needle‐like crystals is investigated using both experimental and numerical approaches. The structure, morphology, habit, and growth behavior of Irbesatan phase A grown from 2‐propanol solution are studied. In this case, molecular modeling shows an unusually high anisotropy of…
The axiomatic theory of ideally glassy networks, which has proved effective in describing phase diagrams and properties of chalcogenide and oxide glasses and their foreign interfaces, is broadened here to include intermolecular interactions in hydrogen-bonded polyalcohols such as glycerol, monosaccharides (glucose), a…
Due to coupling effect, we show that it is difficult to realize the left-handed material by placing metallic wires directly into a ferrite matrix. However by introducing an insulating material round the metallic wires to decouple the direct interaction between the metallic wire and ferrite matrix, we have proposed two…
Mechanical properties of suspended quasi-one-dimensional polymer nanostructures were investigated using atomic force microscopy (AFM). A recently developed new acid-free etch method combined with electron beam lithography was used to fabricate suspended polypyrrole (PPy) nanotubes and helical polyacetylene (HPA) nanof…
Abstract The PANI/CeO 2 composites were synthesized using in situ deposition technique by placing fine graded CeO 2 in polymerization mixture of aniline. This is the single step polymerization process for the direct synthesis of emeraldine salt phase of polymer. Low frequency dielectric studies were carried out on pre…
Abstract A complex of Eu 3+ , benzoate (BA), acrylate (AA), and 1,10‐phenanthroline (Phen) was synthesized in this work. The structure of Eu(BA) 2 (AA)(Phen) was characterized with elemental analysis, FTIR, and UV spectroscopy. Copolymers containing rare earth complex were prepared via the copolymerization of Eu 3+ (B…
The Ti-doped SnO2(110) surface has been investigated by using first-principles method with a slab model. The geometrical optimizations and band-structure calculations have been performed for four possible doping models. Our results indicate that the substitution of Ti for sixfold-coordinated Sn atom at the top layer i…
Epitaxial perovskite Pb(Zn1∕3Nb2∕3)O3 (PZN)-based ferroelectric thin films were prepared through a chemical solution approach, in which the solution precursors were appropriately modified with polyethylene glycol (PEG). The addition of PEG in the solution dramatically promoted the perovskite phase while suppressed the…
Abstract This study compared a series of experimental propylene/ethylene copolymers synthesized by a transition metal‐based, postmetallocene catalyst (xP/E) with homogeneous propylene/ethylene copolymers synthesized by conventional metallocene catalysts (mP/E). The properties varied from thermoplastic to elastomeric o…