Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
An Al-4.57%Mg–0.2%Sc was subjected to equal channel angular pressing up to fixed true strains of 1, 2, 4, 8 and 12 at a temperature of 300oC. It was shown that extensive grain refinement occurs in this alloy through continuous dynamic recrystallization. As a result, ECAP can provide the formation of subgrain stru…
Temperature and amplitude dependent internal friction (TDIF and ADIF) in ultrafine-grained copper (99.95% Cu) processed by 1, 4, or 8 passes of equal channel angular pressing (route BC) and then subjected to annealing was investigated by means of mechanical spectroscopy. A dynamical mechanical analyzer DMA Q800 was us…
We designed and synthesized a Py-Im polyamide seco-CBI conjugate protected by a photocleavable group and demonstrated that it was selectively activated by UV irradiation both in vitro and in vivo. Sequence-specific alkylating Py-Im polyamides containing photolabile linkers may be useful for developing novel chemical-…
Equal Channel Angular Swaging (ECAS) is a new severe plastic deformation process which combines the conventional equal channel angular pressing (ECAP) and the incremental bulk forming process rotary swaging. The tool system consists of two rotary swaging dies with an angled channel that contains four shear zones, gene…
Molten carbonate fuel cell (MCFC) power plants are one of most attractive electricity generation systems for the use of biogas to generate high-efficiency ultra-clean power. However, MCFCs are considerably more expensive than comparable conventional electricity generation systems. The commercialization of MCFCs has be…
The effect of ultrasonic treatment on the microstructure, microhardness and thermal stability of pure nickel after high pressure torsion (HPT) was studied. It was shown that the ultrasonic treatment reduces internal stresses induced by severe plastic deformation. The higher the intensity of ultrasound in the range stu…
This paper reports the synthesis and characterization of ternary nanocomposites consisting of polyaniline (PANI), multiwalled carbon nanotubes (MWCNTs) and manganese dioxide (MnO 2 ) at different MWCNT– MnO 2 loadings. The composite electrical percolation threshold is investigated as well. The in situ nanocomposites w…
Evolution of micro- and macrostructure and mechanical properties of oxygen-free copper after MAF at room temperature was studied. MAF included sequential upsetting and drawing with total cycles number equal to 20 and maximum strain ≈50. MAF causes the formation of homogenous UFG structure with a grain/subgrain size of…
In this study a ZnO:Mn nano structured film doped with manganese of different concentrations is deposited on glass substrates by the sol-gel dip coating method. Characterization techniques of XRD, SEM with EDAX and UV-Visible spectra measurements were done to investigate the effect of an Mn doping concentration on the…
Severe plastic deformation (SPD) processes, are successfully employed to produce ultra fine grain (UFG) and nanocrystalline (NC) microstructures in Ni50.7Ti49.3 shape memory alloy. The effect of grain size on phase transformations during annealing is investigated by differential scanning calorimetry (DSC) and transmis…
For thermoelectrics it is important to produce thermodynamically stable bulk nanostructured materials. Ball milling/hot pressing was shown to reduce the crystallite size by a factor of 100 and to reach about 100 nm with dislocation densities of 1012 – 1013m-2. Thereby thermoelectric properties of single, double and mu…
Evolution of structure of Nb subjected to high-pressure torsion (HPT) with various strain at cryogenic and room temperatures and further annealing in the temperature range of 100-7000C has been studied by transmission electron microscopy (TEM) and microhardness measurements. HPT in liquid nitrogen enables to obtain tr…
A method of functionalization of multi-walled carbon nanotube (MWNT) at room temperature using dry ozone gas is described. The resulting MWNT were characterized by Fourier transform infrared, x-ray photoelectron spectroscopy, and scanning electron microscopy. Combined to these analyses and solubility in liquids, it co…
This work is devoted to enhancement of strength and ductility of the Ti-6Al-7Nb ELI alloy, which is less harmful from medical point of view for human body in comparison to Ti-6Al-4V. It has been demonstrated that formation of an ultrafine-grained structure in the alloy with the help of equal-channel angular pressing i…
This study investigates the performance of surface modification of polycaprolactone (PCL) membrane on the binding and release behavior of basic fibroblast growth factor (bFGF) for in vitro proliferation of porcine eosophageal smooth muscle cells (PESMCs). The PCL membrane surfaces were treated using UV/ozone and the s…
An Al-1050 alloy was processed by ECAP and HPT, respectively. Dry sliding wear tests were conducted on the as-received and SPD-processed samples under various sliding conditions. A comparison of wear rate indicated that SPD processing decreased the wear resistance. Two main wear mechanisms were observed. The initial w…
Severe plastic deformation (SPD) techniques are being considered as low cost processing routes for Mg alloys, aiming hydrogen storage applications. The main objective is to develop air-resistant materials, with lower specific surface area in comparison with ball-milled powders, but with still attractive H-sorption kin…
The ZnO nanorod growth mechanism during liquid-phase deposition (LPD) has been investigated, with results considered in the context of phase stabilization, LPD chemical processes, and Gibbs free energy and entropy. Zinc oxide (ZnO) possesses unique optical and electronic properties, and obtaining ZnO species with high…
We present a study of the kinematics of Twist Extrusion (TE) and show that the mode of deformation in ТЕ is a simple shear. Unlike in Equal-Channel Angular Pressing (ECAP), there are two main shear layers perpendicular to the specimen axis. TE has a significant commercial potential due to the following physical effect…
BACKGROUND: Fabrication of superhydrophobic surfaces has attracted much interest in the past decade. The fabrication methods that have been studied are chemical vapour deposition, the sol-gel method, etching technique, electrochemical deposition, the layer-by-layer deposition, and so on. Simple and inexpensive methods…