Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
The article discusses normal incidence sound absorption by aluminium foam manufactured with powder metallurgy technology. Aluminium foams with different surface morphologies were obtained by varying the type of precursor and adding filler materials during the foaming process. The sound absorption coefficients found fo…
The article shows an energy-accumulation system in change of phase materials, designed for a prototype dwelling used for building two bioclimatic and self-sufficient buildings. These bulidings have been built in Madrid, Washington and Beijing. The characteristics of these materials, the construction systems into which…
The colour coordinate values measured with the colorimeters presently on the market are the mean of the readings obtained for the surface area covered by the light projection tube. When the colour of the surface measured is not uniform, such as in the case of stone, the larger the tube aperture the more representative…
This article reports the results of related to on the performance of concrete made with waterglass (Na2SiO3•nH2O + NaOH)-activated Colombian granulated blast furnace slag. The mechanical strength and durability properties this alkali-activated slag concrete (AAS) were compared to the properties of ordinary Portland ce…
We developed a complex (amplitude and phase) modulation Diffractive Optical Element (DOE) with four phase levels, which is based in a glass substrate coated with DLC (Diamond Like Carbon) thin film as the amplitude modulator. The DLC film was deposited by magnetron reactive sputtering with a graphite target and methan…
The aim of this study was to investigate the influence of therapeutic dose X rays on the microhardness (MH) and degree of conversion (DC) of two different esthetic restorative dental materials. The materials were photo-activated with a LED light-curing unit using three cure-times: 5, 20 and 40 seconds. The photo-activ…
The present article discusses the effects of temperature on the performance of both fresh and hardened concrete and on the properties of its constituent materials, from an industrial perspective. The primary aim of the study was to optimize concrete in very warm environments. Certain industrial procedures are proposed…
OBJECTIVE: Earlier studies on some dental materials measured roughness and/or contact angles or fluoride release separately. In the present study, five dental polymers were investigated to ascertain their contact angles, wettability, roughness, and fluoride release in dry or wet conditions. METHODS: Samples for 5 mate…
In this work, nanocomposites were prepared by adding a small amount of single walled carbon nanotubes (SWCNTs) to an epoxy resin aiming to study the resulting mechanical, viscoelastic and thermal properties of the nanocomposites. To optimize the processing of the nanocomposites and to favor a homogeneous dispersion of…
The magnetic behavior and its relationship with microwave absorbing properties have been investigated for doped Z-type barium hexaferrites (Ba3Co1.3Zn0.3Cu0.4Fe 24O41)/ polychloroprene (CR) nanocomposites. Simultaneous substitutions by Co2+, Cu2+, and Zn2+ ions make possible the use of these materials as RAMs, due to…
This study shows the processing of radar absorbing multilayer structures based on nonwoven substrates of polyacrylonitrile and poly (ethylene terephthalate) impregnated with a polyaniline and polyurethane mixture. Processed materials with different parameters - layer stacking and impregnated faces - were evaluated con…
Resin Transfer Molding (RTM) is a polymer composite processing technique widely used in the aeronautics and automotive sectors. This paper describes the numerical simulation of the RTM process where Darcy's law was used for the mathematical formulation of the problem. A control volume finite element method was used fo…
Natural fibers from macadamia nut shell, dried coconut shell endocarp, unripe coconut mesocarp, sugarcane bagasse and pine wood residue were used to prepare activated carbon fibers (ACF) with potential application for removing microcystins. The ACF from pine wood and sugar cane bagasse were used to remove [D-Leucine¹]…
Wind energy converters of small size used in isolated units to generate electrical energy must present low maintenance cost to such facilities economically viable. The aspect to be analyzed in cost reduction is the brake system, since in isolated systems the use of brake is more frequent reducing the brake pads life t…
Double-torsion tests were carried out to ascertain whether a thin test specimen would affect the results of this test. The tests involved two test specimen sizes, one with a thickness five-fold greater than the particle size of the material and the other with a three-fold greater thickness. The width of both test spec…