Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Broadband Dielectric Spectroscopy (BDS) is employed in order to investigate relaxation phenomena occurring in natural rubber (NR), polyurethane rubber (PUR) and PUR/NR blend based nanocomposites, reinforced by 10 parts per hundred (phr) Layered Silicates (LS). Nanocomposites and matrices were examined under identical…
Polyamide 6/silica nanocomposites were synthesized by in situ ring-opening anionic polymerization of -caprolactam in the presence of sodium caprolactamate as a catalyst and caprolactam-functionalized silica as an initiator. The initiator precursor, isocyanate-functionalized silica, was prepared by directly reacting co…
Composites from PVC and chemically treated olive pomace have been prepared. The effect of the incorporation of virgin and benzylated olive pomace in the poly(vinyl chloride) matrix on dielectric, mechanical and thermal stability properties, of /olive pomace composites was studied. The mechanical properties of the benz…
The dry sliding and friction behaviors of organoclay modified hydrogenated nitrile (HNBR) and ethylene/propylene/diene (EPDM) rubbers were studied using a pin (steel)-on-plate(rubber sheet) test configuration. It was found that the organoclay modification may improve or deteriorate the resistance to wear of rubbers. T…
The polyaniline:nylon-6,6 (PANI:Ny-6,6) composite films were prepared by diffusion process and the oxidative polymerization of aniline within the nylon-6,6 matrix. The composite films were characterized by fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) as well as for their electrica…
Effects of three nucleating agents concluding talc, sodium benzoate (SB) and an ionomer (Ion., Na + ) on crystallization of poly(ethylene terephthalate) (PET) were studied by differential scanning calorimetry (DSC) and polarized optical microscope (POM), the parameters of crystallization kinetics were obtained through…
For the last three decades the intensive research studies and developments of polymer systems for controlled release of pharmaceuticals have been carried out At curative dose the prolonged delivery of drugs from the systems into organism permits to eliminate the shortcomings in peroral, injectable, aerosol, and the ot…
The percolation model was applied in the study of brittle to ductile transition (BDT) of polystyrene (PS) and polyolefin elastomer (POE) blends. Based on the interparticle distance and percolation model, stress volume (Vs) can be expressed by volume fraction (Vr) and ratio of the diameter of stress volume and the diam…
In this study, thermal, mechanical and fire retardant properties of silane-crosslinked low-density polyethylene (XLPE) containing ethylene-vinylacetate (EVA) copolymer, alumina trihydrate (ATH) and antimony trioxide (Sb2O3) have been studied. Samples were prepared in a single-screw extruder and the silane type was vin…
This is a revised manuscript submitted to the the Editorial Corner.
Experimental investigations and numerical simulations are performed in order to numerically predict the buckling behaviour of thin composite laminated specimens. Experiments are aimed at two objectives: the first is to completely characterize the carbon/epoxy material under simple loading configurations, the second is…
Volume strain measurements were carried out on PE/CaCO3 composites prepared with three different matrix polymers, containing various amounts of filler. The analysis of the debonding process and the various stages of void formation proved that the model developed for the prediction of the initiation of debonding is val…
Electrical conduction characteristics in two different polyimide films prepared by the imidization of polyamic acid (PAA) and pre-imidized polyimide (PI) solution were investigated. It is found that the current density of the polyimide film from PAA was higher than that of the polyimide film from PI at the same electr…
A silicon-containing arylacetylene resin (SAR), a poly(dimethylsilyleneethynylene phenyleneethynylene) (PMSEPE), was synthesized. The PMSEPE is a solid resin at ambient temperature with a softening temperature about 60C and soluble in some solvents like tetrahydrofuran. The melt viscosity of the PMSEPE resin is less t…
Non-isothermal crystallization kinetics were characterized by using differential scanning calorimetry (DSC) analysis on neat semicrystalline syndiotactic polystyrene (sPS) and its nanocomposites with polystyrene (PS) functionalized full-length single walled carbon nanotubes (SWNT-PS), which was prepared by copper (I)…
The heat transfer and burning behavior of intumescent fire-retardant polypropylene were studied by cone calorimeter at heat flux levels of 50 kWm -2 to establish an essential physical model for the intumescence process in fire. A mathematical model for the burning process of fire-retardant intumescent polymer was put…
The miscibility behavior of poly(styrene-co-cinnamic acid) (PSCA) with poly(methyl methacrylate) (PMMA), poly[(methyl methacrylate)-co-(4-vinylpyridine)] (PMMA4VP) and poly[(methyl methacrylate)-co-(2-vinylpyridine)] (PMMA2VP) was studied. DSC measurements indicated that PSCA23 containing 23 mol% of carboxylic acid un…
The effect of curing systems on the orientation and the dispersion of the layered silicates in acrylonitrile butadiene rubber nanocomposite is reported. Significant differences in X-ray diffraction pattern between peroxide curing and sulfur curing was observed. Intense X-ray scattering values in the XRD experiments fr…
The effect of blend ratio on properties of chloroprene rubber/natural rubber (CR/NR) blends was investigated. In addition to the mechanical properties, attention was also given to the resistance to thermal aging, oil and ozone of the blends. Silica was selected as a reinforcing filler in this study due to its unique c…
A novel bisphenol 1, 4'-bis{4-[(4-hydroxy) phenyliminomethylidene] phenoxy} benzene (BHPB), which contains azomethine moiety and flexible aromatic ether linkage, was synthesized and introduced into the curing system composed of diglycidyl ether of bisphenol A (DGEBA) and diamine. The curing behavior of DGEBA/diamine c…