Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Abstract Low generation amino‐group‐terminated poly(ester‐amine) dendrimers PEA1.0 (NH 2 ) 3 and PEA1.5 (NH 2 ) 8 , and poly(amido‐amine) dendrimer PAMAM1.0 (NH 2 ) 4 were used as diglycidyl ether of bisphenol A (DGEBA) epoxy resin hardeners. Thermal behavior and curing kinetics of dendrimer/DGEBA systems were investi…
Abstract Polyaniline and its derivatives have high antioxidative stability and are considered to belong to the most useful conductive polymers for practical application. In this work, we have linked 1,4‐phenylenediamine to poly(styrene‐ co ‐chloromethylstyrene) and prepared poly(styrene‐ co ‐ p ‐aminoanilinemethylstyr…
Abstract Miscibility was studied for four polyamide blends of 6I/6T [copolymer consisting of 1,6‐hexamethylene diamine and isophthalic acid (6I) (70 wt %) and terephthalic acid (6T) (30 wt %)] with MXD6 (polyamide of m ‐xylenediamine and adipic acid), BAC6 (polyamide of 1,3‐bis(aminomethyl)cyclohexane and adipic acid)…
Abstract The internal and external curved surfaces of polysulfone hollow fiber membranes were characterized by atomic force microscopy (AFM), contact angle measurement (CAM), and scanning electron microscopy (SEM) with the aim of improving the membrane surface properties for blood compatibility. Novel approaches were…
Abstract Elastomeric materials are used as barriers to protect workers against exposure to chemicals. The effectiveness of a polymer as a chemical protective material depends on the rate of permeation of chemicals through it. The permeation rate is dependent on the type and amount of fillers added into the polymer mat…
Abstract The thermal cure reactions of phenylethynyl terminated AFR‐PEPA‐4 oligomer and a model compound N ‐phenyl‐[4‐(phenylethynyl) phthalimide] were investigated. The kinetics analysis of the thermal cure of AFR‐PEPA‐4 was determined using DSC, with modified DiBenedetto equation. The activation energy of thermal cu…
This article demonstrates the effect of exfoliated nano-clay on the microcellular foam processing of amorphous and crystalline nylon. Amorphous and crystalline nylon 6 nanocomposites are prepared using a twin-screw extruder. The exfoliated nanocomposite structures are characterized by X-ray diffraction (XRD) and trans…
Abstract Natural fiber composites were designed and optimized to achieve good mechanical properties and resistance to growth of living organisms. Composite materials were prepared from poly(lactic acid) (PLA) with flax fibers, which had been subjected to interstitial polymerization to replace the water in the cellulos…
UreG is an essential protein for the in vivo activation of urease. In a previous study, UreG from Bacillus pasteurii was shown to behave as an intrinsically unstructured dimeric protein. Here, intrinsic and extrinsic fluorescence experiments were performed, in the absence and presence of denaturant, to provide informa…
The electrical resistivity and tensile properties of composites formed by the incorporation of metal powders such as aluminum (Al), copper (Cu), and iron (Fe) in a high-density polyethylene (HDPE) matrix are investigated. Results are presented for metal fillers content varying between 0 and 55% by volume. The effect o…
Abstract Films of poly(vinyl butyral) composites with triphenyl tetrazolium chloride dye (TTC) and the antioxidant nickel dibutyl dithiocarbamate (NBC) or 2‐mercaptobenzimidazole (MBI) were prepared by the solution casting method using butyl alcohol as a solvent. The effect of various doses of electron beam irradiatio…
Self-condensation of the amphiphilic fluorene trimer occurs in the solvent mixture, giving pure "green" fluorescent nanoparticles with controlled radii of 20-100 nm. The origin of the green fluorescence is attributed to the excimer emission via excitation of aggregated dimer structures in the nanoparticles rather than…
A commercial variable angle spectroscopic ellipsometer from J. A. Woollam Company is modified in order to make possible measurements in guiding structures. The half leaky guided mode technique is realised for liquid crystal optical dispersion measurements. Features and problems related to experimental data interpretat…
This report describes the remarkably rapid synthesis of polymer brushes under mild conditions (50 degrees C) using surface-initiated polymerization. The highly active atom transfer radical polymerization catalyst Cu(I)-1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane allows synthesis of 100 nm thick poly(tert-bu…
A new series of highly bright and efficient poly( p -phenylenevinylene)s (PPV)s based on polyhedral oligomeric silsesquioxanes (POSSs) was synthesized via the Gilch polymerization method. The three POSS-containing PPVs are as follows: POSS05-PPV(containing 5 mol % POSS-appended PPV units), POSS25-PPV, and POSS100-PPV…
Abstract Because of their good mechanical properties and low density, natural fibers are more and more considered as reinforcement in composite materials. To improve the adhesion between the polymer matrix and natural fibers and to reduce the water sorption, helium cold plasma and autoclave treatments have been perfor…
Interaction of a transition metal atom with defects in single-walled carbon nanotubes (SWNTs) were investigated through density functional theory calculations. For three kinds of intrinsic defects (single vacancies, double vacancies and Stone-Wales defects) in (5,5) armchair and (10,0) zigzag SWNTs, stable configurati…
We investigate thin films of cylinder-forming diblock copolymer confined between electrically charged parallel plates, using self-consistent-field theory (SCFT) combined with an exact treatment for linear dielectric materials. Our study focuses on the competition between the surface interactions, which tend to orient…
The orders and excitations in spin and orbital sectors have been investigated for perovskite-type $R{\mathrm{VO}}_{3}$ ($R=\mathrm{La}$, Nd, and Y) by measurements of Raman scattering spectra. The orbital excitation bands emerge in the $C$-type spin- and $G$-type orbital-ordered phases commonly for the three $R{\mathr…
A series of low molecular weight organic gelator (LMOG) gel systems sensitive to alkaline/acidic stimuli was established by employing amino acid derivatives of cholesterol as "latent" gelators, which are cholesteryl glycinate (1), cholesteryl L-alaninate, cholesteryl D-alaninate, cholesteryl L-phenyl alaninate, and ch…