Yingdong Song2010-01-01Journal of Aerospace Power
Based on the stress distribution in the bonded and de-bonded region of ceramic matrix composite(CMC) with matrix cracks,the sliding mechanism of CMC was investigated,and the analytical method for estimating damping capacity in unidirectional CMC was derived.Numerical examples show that:(1) CMCs' inherent damping capac…
Advanced ceramic materials synthesisNumerical methods in engineeringAluminum Alloys Composites Properties
Yingguang Li2010-01-01Surface Technology
In order to improve corrosion resistance of AZ31 magnesium alloy for biomedical application,a composite coating was prepared on AZ31 with the combination of applications of anodic oxidation and chemical conversion technology.The morphology of the coating was observed by SEM and its phases was analyzed by XRD while its…
Corrosion Behavior and InhibitionMagnesium Alloys: Properties and ApplicationsTribology and Lubrication Engineering
HU Zheng-fei、WU Ximao2010-01-01Journal of Chinese Society of Power Engineering
Taking X20CrMoV12.1 heat-resistant steel pipes as the object of study, microstructure changes of the material,especially evolution of the carbide morphology and composition,were studied,while causes leading to variation of material properties analyzed.Results show that after 180 000 h long-term service at 550 ℃,the ma…
Microstructure and Mechanical Properties of SteelsHigh Temperature Alloys and CreepMetal Alloys Wear and Properties
Guoying Li2010-01-01Journal of Functional Biomaterials
The steady rheological behaviors of collagen solution were studied by coaxial viscometer.The effects of concentration and temperature on the flow curve of collagen solution were discussed.The experimental data showed that viscosity decreased with increasing shear rate,indicating that collagen solution was pseudo-plast…
Collagen: Extraction and Characterization
Hong Lin2010-01-01Rejiagong gongyi
The effects of carburizing temperature,carbon potential in strong carburisng period and diffusion carburisng period on microstructure and properties of carburized layer of new-type 16Cr3NiWMoVNbE gear steel were studied.The results show that carburizing layer's depth and carbon concentration increases with the increas…
Microstructure and Mechanical Properties of SteelsMetallurgy and Material FormingMetal Alloys Wear and Properties
YE Zheng-fang2010-01-01OpenAlex
During outdoor applications,ethylene-propylene-diene monomer(EPDM) rubber can be degraded under the effect of light,oxygen,heat and chemical medium, which can deteriorate the bulk properties and reduce its service life.The research on EPDM aging was reviewed in this paper and the trend of development in EPDM aging stu…
Polymer Nanocomposites and PropertiesHigh voltage insulation and dielectric phenomena
Zhiguo Su2010-01-01Guocheng gongcheng xuebao
Relatively uniform-sized poly(lactic acid) (PLA) microspheres with the average particle size of 800 nm were successfully prepared by premix membrane emulsification combined with solvent evaporation method. The effects of pH value, salt concentration, amount of PLA microspheres, HBsAg concentration and adsorption tempe…
Bone Tissue Engineering MaterialsHydrogels: synthesis, properties, applicationsbiodegradable polymer synthesis and properties
Yuan Shu-sheng2010-01-01Engineering Mechanics
The sources in building fire are mainly solid combustibles. Based on the pyrolysis kinetics model of solid combustibles, a large eddy simulation (LES) is applied to the study of the interactions between the pyrolysis of the polyurethane foam (PUF) slab and the space fire spread and smoke flow in a multi-room building.…
Fire dynamics and safety researchFlame retardant materials and propertiesWind and Air Flow Studies
Dong Zhao-shun2010-01-01Non-ferrous Mining and Metallurgy
This paper describes the current situation of waste recycling steel,analysis the characteristics and main source of the dust from steel-smelting,provided the route of how to obtain zinc dust from steelmaking for recovering zinc.
Bauxite Residue and UtilizationMaterials Engineering and ProcessingMetallurgy and Material Science
Zhiyou Li2010-01-01The Chinese Journal of Nonferrous Metals
Ni coatings with different grain sizes,preferred orientation and impurity element contents can be electrodeposited by regulating cathode current density. Using transmission electron microscopy(TEM),scanning electron microscopy (SEM),energy dispersive spectroscopy (EDS) and X-ray diffractometry(XRD),the oxide film stru…
High-Temperature Coating BehaviorsElectrodeposition and Electroless CoatingsMetallurgical and Alloy Processes
Jiajia Yan2010-01-01Chinese Journal of Explosives and Propellants
Based on Lee-Tarver ignition and growth model,the models that tungsten spheres with an outer diameters of 9,14,18,and 25mm respectively impacted tantalum covered Composition B charges were simulated,and the critical velocity to ignite Composition B were gained,which accorded with the experimental results well,and then…
Energetic Materials and CombustionCombustion and Detonation ProcessesHigh-Velocity Impact and Material Behavior
Xie Qilin、Liu Hangang、Chengde Yang 等 5 位作者2010-01-01Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms
The criterion for persistent fission chain determination was discussed and the analog Monte-Carlo code for calculating initiation probability of persistent fission chain based on Geant4 toolkit was developed.Initiation probabilities for a suit of test problems and GodivaⅠ reactor whose reactivity is 5 c/above prompt c…
Nuclear reactor physics and engineeringNuclear Materials and PropertiesNuclear Engineering Thermal-Hydraulics
Jie Bao2010-01-01Rengong jingti xuebao
The nano-sized β-Ni(OH)2 powder with nano-flakes and nanorod were prepared by chemical precipitation method.The nano-sized powder was added into micron-scale spheroshape Ni(OH)2 at a ratio of 8% to get a composite electrode.Effects of reaction temperature and stirring speed on the morphology and structure of the powde…
Conducting polymers and applicationsElectrodeposition and Electroless CoatingsElectrochemical Analysis and Applications
Rong Wang2010-01-01OpenAlex
Hydrogen was charged into X70 and X80 pipeline steels in 0.5 mol/L H2SO4 solution by cathodic polarization method and the behavior of hydrogen in both steels was studied by glycerol displacement method.The results showed that a stable hydrogen concentration was obtained in the steels as the charging time was longer th…
Corrosion Behavior and InhibitionHydrogen embrittlement and corrosion behaviors in metalsNon-Destructive Testing Techniques
Jun Yang2010-01-01Guisuanyan tongbao
Based on experimental results of typical architectural glass,impact properties of glass were studied by using a split Hopkinson pressure bar(SHPB)technique.Experimental results show that impact properties of tempered glass,such as stress,strain rate and properties of impact resistance et al,are better than that of flo…
Advanced ceramic materials synthesisAdvanced Surface Polishing TechniquesHigh-Velocity Impact and Material Behavior
Bin Lu2010-01-01Cailiao yanjiu xuebao
The tensile properties at room temperature and at 650℃of TMW-1 titanium alloy and TMW-2 titanium alloy,with different content ofβ—stabilizers(Mo,W),under different dual and ternary annealing,were studied.The results show that the tensile properties of TMW-1/2 titanium alloys at 650℃were equivalent to those of several…
Microstructure and Mechanical Properties of SteelsIntermetallics and Advanced Alloy PropertiesTitanium Alloys Microstructure and Properties
Xue Jun-ping2010-01-01Gangtie yanjiu xuebao
The microstructure and properties of SPHC hot-rolled strip were investigated by using tensile,metallographic,scanning electron microscope(SEM),energy dispersion spectrum(EDS) and quantitative analysis of precipitates.The results show that: the maximum difference of yield strength on the direction of length is about 40…
Microstructure and mechanical propertiesMetallurgy and Material FormingSuperconducting Materials and Applications
Xiaoyan Wang2010-01-01Chemical Reagents
Electrochemical behaviors of aluminum in 4 mol/L KOH solution with inhibitors were investigated by hydrogen collection and polarization curve measurement.It was found that aluminum exhibited minimum corrosion rate in a 4 mol/L KOH solution containing 0.02 mol/L EDTA,saturated Ca(OH)2 and saturated Sr(OH)2.It was also…
Corrosion Behavior and InhibitionConcrete Corrosion and DurabilityAnodic Oxide Films and Nanostructures
Ailiang Chen2010-01-01Rare Metals and Cemented Carbides
The distributing rules of adsorbed ions in exchange column and the influencing factors during dynamic ion exchange are acquired through theoretical analysis.On the above basis,a novel idea of variable-parameter ion exchange and its principles are presented.The application of the variable-parameter ion exchange process…
Advanced materials and compositesAdvanced Materials Characterization TechniquesMetallurgical and Alloy Processes
Shufen Li2010-01-01Chinese Journal of Energetic Materials
Effects of the oxidant(HMX or CL-20) on the combustion performances of Al/H2O based fuels were studied by a series of experimental techniques in air atmosphere.The experimental results show that,compared with CL-20 addition,HMX makes Al powders burn much thoroughly,and it has better effect in increasing the temperatur…
Catalytic Processes in Materials ScienceEnergetic Materials and CombustionThermal and Kinetic Analysis