Suwichar Deehasing、Soamwadee Chaianansutcharit、Oravan Sanguanruang2010-01-01OpenAlex
The substitution of Ca²⁺ and La³⁺ ions at A-site and the addition of Ca²⁺, Cu²⁺ and Zn²⁺ ions in the structure of Ba₀.₅Sr₀.₅Co₀.₈Fe₀.₂O₃-δ (BSCF) were successfully performed by the modified citrate method. The characterization by XRD and SEM demonstrated that all samples showed the single phase of cubic ABO₃ perovskit…
Electronic and Structural Properties of OxidesMagnetic and transport properties of perovskites and related materialsAdvancements in Solid Oxide Fuel Cells
Nipawan Thadkad、Surachai Pornpakakul2010-01-01OpenAlex
A new polymer-supported IBX was prepared in this research to use as an oxidizing agent in the oxidation reaction of glycerol. The appropriate method for the synthesis of polymer-supported IBX consisted of 8 steps using p-toluic acid as a starting material for IBX and aminomethyl polystyrene as a supporting material. F…
Catalytic Processes in Materials ScienceAdvanced Control Systems OptimizationWater Quality Monitoring and Analysis
Pavarit Promsena、Satreerat Hodak、Jose Hodak2010-01-01OpenAlex
We have fabricated strain gauges from dielectric materials, barium titanate (BaTiO₃) and barium strontium titanate (BaSrTiO₃), depositing on flexible borosilicate glasses substrates using a sol-gel method. The coplanar capacitors were patterned on the surface of the films using a DC sputtering technique. The measureme…
Ferroelectric and Piezoelectric MaterialsElectronic and Structural Properties of OxidesGas Sensing Nanomaterials and Sensors
Arinrat Utsanakul、Prarom Salimee、Chairat Wiwatwarrapan2010-01-01OpenAlex
The objective of this study was to evaluate the corrosion resistance of four types of dental alloys: Au-Pd, Ag-Pd, Ni-Cr and Cu-Al alloys covered by two different dental cements using immersion test in acidic solution. The alloys were cast into ten disc-shaped specimens (5.0 mm diameter and 0.8 mm thick). Each alloy w…
Corrosion Behavior and InhibitionHydrogen embrittlement and corrosion behaviors in metals
สมโภช อังคณาวิริยารักษ์、นิยม ธำรงค์อนันต์สกุล2010-01-01OpenAlex
วัตถุประสงค์ของการทดลองในห้องปฏิบัติการครั้งนี้เพื่อศึกษาผลของสารปรับสภาพผิวเซอร์โคเนียสามชนิด ที่มีต่อค่ากำลังแรงยึดดึงของการเชื่อมติดระหว่างสารยึดเรซินและผิวหน้าเซอร์โคเนียที่ขัดเรียบ การศึกษานี้ได้ทำการเตรียมแผ่นเซอร์โคเนียขึ้นและเชื่อมติดกับแท่งเรซินคอมโพสิต โดยแบ่งชิ้นงานเป็น 4 กลุ่มๆ ละ 15 ชิ้น โดยมีกลุ่มที่ไม่ไ…
Material Selection and PropertiesComposite Material MechanicsPolymer Nanocomposites and Properties
กนกวรรณ แสงเกียรติยุทธ、ปราณี รัตนวลีดิโรจน์、ธนิต สิงหบุญพงศ์2010-01-01OpenAlex
รายงานวิจัยฉบับนี้ครอบคลุมเนื้อหาการวิจัยในปีที่ 1 ของโครงการ “การเตรียมแผ่นฟิล์ม ไฮโดรเจลที่มีอนุภาคเงินนาโน” ซึ่งเป็นโครงการวิจัยต่อเนื่อง 2 ปี ที่มีเป้าหมายของโครงการในการเตรียมไฮโดรเจลที่มีสมบัติยับยั้งเชื้อจุลินทรีย์สำหรับการนำไปพัฒนาสู่การใช้งานด้านแผ่นปิดแผล สำหรับการดำเนินงานในโครงการปีที่ 1 จะมุ่งเน้นทำการศึก…
Polymer Science and ApplicationsStructural mechanics and materialsHeat Transfer and Numerical Methods
Khanitthakanya Munkid、Pattarapan Prasassarakich2010-01-01OpenAlex
This research evaluates the use of natural fiber in polyamide-6 composites aiming to synthetic fiber replacement. The application of natural fiber as reinforcement in composite materials requires a strong adhesion between fiber and the synthetic matrix. In this work, the surface treatments were mercerization and apply…
Plant Surface Properties and TreatmentsNatural Fiber Reinforced Composites
Ubonrat Siripatrawan2010-01-01OpenAlex
This research was aimed to develop an active film from chitosan film incorporated with green tea extract to enhance antioxidant and antimicrobial properties in order to be used for food shelf life extension. The experiments were divided into 3 parts. Firstly, chitosan-based film preparation and modification were deter…
Nanocomposite Films for Food Packaging
Jindarat Yaemwong、Patcha Chatraphorn2010-01-01OpenAlex
Molecular beam epitaxy growth on vicinal substrates are studied using the Monte Carlo simulation technique. A vicinal surface consists of equal-width flat terraces of different height separated by step edges. It is a type of substrate widely used in thin film fabrication. It is well-known that high quality films can b…
Plasma Diagnostics and ApplicationsFluid Dynamics and Thin FilmsSurface Modification and Superhydrophobicity
Ornnicha Kongwut、Satreerat Hodak2010-01-01OpenAlex
Polycrystalline Fe-doped barium titanate (Fe-doped BaTiO₃) and Fe-doped calcium copper titanate (Fe-doped CaCu₃Ti₄O₁₂) thin films were deposited on quartz substrates with the annealing temperature of 800℃ by a sol-gel spin coating technique. The ⁶⁰Co source (Gammacel 220 Excell) with the exposure rate of 10 kGy/hr was…
Microwave Dielectric Ceramics SynthesisPerovskite Materials and ApplicationsThermal Expansion and Ionic Conductivity
Supak Mahapram、Sirilux Poompradub2010-01-01OpenAlex
In this study, the shrink film based on LDPE and NR (reclaimed rubber (RR) and natural rubber (NR) latex) blends was prepared by internal mixer. The effect of NR types and NR contents to shrink film properties were investigated. The results indicated that the RR was not suitable to use for shrink film because RR/LDPE…
Transport Systems and TechnologyMaterial Properties and ProcessingPolymer Nanocomposites and Properties
Nadda Booranabunyat、Voravee P. Hoven2010-01-01OpenAlex
Quaternized chitosan particles were prepared by self assembly of amphiphilic chitosan having phthaloyl (Ph), hexyl (He) or dodecyl (Do) groups as hydrophobic entity and poly(ethylene glycol)methyl ether (mPEG) or N-[(2-hydroxyl-3-trimethylammonium)]propyl (HTAP) groups as hydrophilic entity that were immobilized on ch…
Nanocomposite Films for Food Packaging
Yumairoh Kasa、Satreerat K. Hodak2010-01-01OpenAlex
The high dielectric perovskite CaCu3Ti4O12(CCTO) has recently attracted much attention. We have successfully prepared CCTO thin films by a sol-gel spin coating technique. We synthesized CCTO films on different types of substrates in order to study the effect of substrate types on the microstructure and dielectric prop…
Electrical and Thermal Properties of MaterialsDielectric properties of ceramicsMicrowave Dielectric Ceramics Synthesis
กาญจนาพร มิ่งมงคลชัยกุล、ปิยวัฒน์ พันธุ์โกศล2010-01-01OpenAlex
การวิจัยนี้มีวัตถุประสงค์เพื่อศึกษาความแข็งผิวและการยึดติดกับฐานฟันเทียมของซี่ฟันเทียมสำเร็จรูปและอะคริลิกชนิดบ่มด้วยความร้อน และศึกษาสัดส่วน ชนิดของวัสดุอัดแทรกและปริมาณของสารเชื่อมขวางที่สามารถปรับปรุงสมบัติของอะคริลิกใสสำหรับใช้เป็นวัสดุทำซี่ฟันเทียม โดยแบ่งออกเป็น 3 ตอน คือ ตอนที่ 1 เปรียบเทียบอะคริลิกชนิดบ่มด้วยค…
Semiconductor materials and interfacesSynthesis and characterization of novel inorganic/organometallic compoundsCopper Interconnects and Reliability
วิรัลย์พัช พินิจสถิล、สมพล สงวนรังศิริกุล、ชมพูนุท สุวรรณศรี2010-01-01OpenAlex
วัตถุประสงค์: เพื่อศึกษาผลของการกระตุ้นเส้นประสาทและกล้ามเนื้อด้วยไฟฟ้าร่วมกับการฝึกโดยใช้แรงต้านต่อการเพิ่มสมรรถภาพความแข็งแรงของกล้ามเนื้อต้นขา วิธีดำเนินการ: สุ่มอาสาสมัครจำนวน 52 คนออกเป็น 4 กลุ่ม กลุ่มที่ได้รับการกระตุ้นไฟฟ้า(NMES), กลุ่มที่ได้รับการกระตุ้นไฟฟ้าร่วมกับการฝึกโดยใช้แรงต้าน(RNMES), กลุ่มที่ได้รับการ…
Total Knee Arthroplasty OutcomesPolymer Science and ApplicationsMaterial Selection and Properties
Varras Gregory、Alexopoulou Athanasia、Papanikolaou Theofania 等 6 位作者2010-01-01IOS Press eBooks
According to the regulations of the EU, each member state is obliged to develop and update a Land Parcel Identification System so as to control and analyze the Farmers Single Aid Payment Scheme. With respect to the EU Technical Specs, the Hellenic territory mainly occupied by Agricultural Land Uses should be photointe…
Silicone and Siloxane ChemistryAdvancements in Photolithography Techniques
Kobayashi Satoru、Hiroaki Kikuchi、Takahashi Seiki 等 7 位作者2010-01-01Studies in applied electromagnetics and mechanics
Effects of neutron irradiation on magnetic hysteresis loops have been studied in pure Fe, Fe-1wt% Mn, Fe-0.9wt% Cu, and Fe-0.9wt% Cu-1wt% Mn model alloys, which were irradiated at 290°C to a fluence of 3.32 × 1019n/cm2. Minor-loop coefficients which are obtained from scaling relations between minor-loop parameters and…
Nuclear Materials and PropertiesFusion materials and technologiesNuclear reactor physics and engineering
Hoerbst Alexander、Hackl Werner、Ammenwerth Elske2010-01-01Studies in health technology and informatics
Quality assurance is a major task with regard to Electronic Health Records (EHR). Currently there are only a few approaches explicitly dealing with the quality of EHR services as a whole. The objective of this paper is to introduce a new Meta-Model to structure and describe quality requirements of EHRs. This approach…
Machine Learning in Materials Science
Mazauric Vincent、Drouineau Mathilde、Rondot Loïc 等 4 位作者2010-01-01Studies in applied electromagnetics and mechanics
A new approach to face the problem of dynamic hysteresis and assess extra-losses in soft magnetic materials is investigated. Thanks to a spatial averaging technique and a variational principle, a dedicated formulation is derived. It takes into account microscopic magnetization mechanisms and domain wall motion-induced…
Structural Health Monitoring TechniquesMagnetic Properties and ApplicationsMetallurgy and Material Forming
ถนัดชัย มั่นเขตวิทย์、คารินา โชติรวี2010-01-01OpenAlex
สารนิพนธ์ฉบับนี้มุ่งศึกษาแนวทางการแปลคำทางวัฒนธรรมในตัวบทประเภทวรรณกรรมจากไทยเป็นอังกฤษ กรณีศึกษา สี่แผ่นดิน ของตุลจันทร์ โดยมีจุดประสงค์เพื่อวิเคราะห์แนวทางการแก้ปัญหาการแปลข้ามวัฒนธรรมของผู้แปล และค้นหาปัจจัยที่มีผลต่อการตัดสินใจของผู้แปล ผู้วิจัยได้จัดกลุ่มคำที่เลือกมาโดยใช้แนวคิดการจัดกลุ่มคำทางวัฒนธรรมตามเกณฑ์ของ…
Design Education and PracticeGraphic Design and TypographyMaterial Selection and Properties