Materials Literature

文献浏览

按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。

清除
第 293412 / 311961 页 · 当前展示 5,868,221–5,868,240 / 6,239,206 条匹配结果 · 摘要仅作预览

Study on NO_X selective catalytic reduction with CuO/SiO_2-Al_2O_3/cordierite catalysts

Zhou Chao-qiang2009-01-01Applied Chemical Industry

CuO/SiO2-Al2O3/CC with different Si/Al complex ratio of SiO2 to Al2O3 were prepared by a sol-gel method and characterized with XRD,BET and XPS.The catalytic behavior in selective catalytic reduction(SCR) of NOX by urea was also investigated.The results showed that with the increase of SiO2,the phase composites of the…

Catalytic Processes in Materials ScienceMagnesium Oxide Properties and ApplicationsPigment Synthesis and Properties

Enhancement Effect of Nano-scaled White Silica on the Hydrothermal Stabilities of Mesoporous Montmorillonite

Li Fang2009-01-01Journal of Inorganic Materials

Poor stabilities of synthesized mesoporous sieves inhibit their applications.In present work nano-sized high crystalline mineral,natural montmorillonite,was introduced into the synthetic system in order to improve the stability of mesoporous sieve.Two additional siliceous sources,Na2SiO3 and nano-sized white silica,we…

Zeolite Catalysis and SynthesisMesoporous Materials and CatalysisClay minerals and soil interactions

Study on the Mechanical Properties of Pure Bulk Al with Nanocrystalline

Xinkun Zhu2009-01-01Cailiao gongcheng

Pure bulk Al with grain size in the range of nano scale was prepared through high energy ball milling using pure Al powder as raw material,and samples prepared with different milling parameters including milling time and milling ratio,etc.were compared.The grain size and mechanical properties of pure bulk Al after bal…

Microstructure and mechanical propertiesMetal and Thin Film MechanicsAluminum Alloys Composites Properties

Influence of the Main Constituents of Flue Gas on the Desulfurization and Denitrification Process Based on Highly Active Absorbents

Lidong Wang2009-01-01Journal of Engineering for Thermal Energy and Power

By using a self-prepared oxygen-enriched type highly active absorbent,the influence of CO2 and O2 in flue gas on the desulfurization and denitrification efficiency of the highly active absorbent and the influence of the coexistence of SO2 and NOx on the desulfurization efficiency were experimentally studied at an opti…

Catalytic Processes in Materials ScienceIndustrial Gas Emission Control

A Study on Synergistic Flame Retardant HDPE System With Mg(OH)_2 and Red Phosphorus

Cui Wen-guang2009-01-01Journal of Shijiazhuang University

The synergetic fire retardant effect of Mg(OH) 2 and encapsulated red phosphorus for HDPE materials and also mechanical properties were studied.The results show that the flame retardant effect were the best when 16 weight percent of coated red phosphorus and Mg(OH) 2 in propotion 2 to 1 were added in materials.The fir…

Flame retardant materials and properties

Variation of Solidification Structures of LY12 Al Alloy Solidified Under Pulse Current

Jianzhong Cui2009-01-01OpenAlex

The pulse current was applied to the solidification process of LY12 Al alloy. The effect of discharging voltage of pulse current on the macrostructures and solute content inside the grain was studied. The discharge process was as follow:the capacitance of the capacitor is 80 μF and the discharge voltage varied from 3…

Aluminum Alloy Microstructure PropertiesSolidification and crystal growth phenomenaMetallurgical Processes and Thermodynamics

Advance in the Research of Surface Treatment for Magnesium-Lithium Alloy

Fan Gong2009-01-01Electroplating & Pollution Control

A review is made on the current status of the surface treatment methods for magnesium-lithium alloy,focusing on the research progress of chemical conversion,electioless plating,anodic oxidation and other surface anticorrosion technologies.The development tendency of the surface treatment technology for magnesium-lithi…

Magnesium Alloys: Properties and ApplicationsMetallurgy and Material Science

Determination of montmorillonite's adsorption capacity by methylene blue method

Qian Li-min2009-01-01OpenAlex

Objective:To establish a methylene blue method for determination of montmorillonite's adsorption capacity instead of the strychnine sulfate method.Method:The standard solution was 0.2% methylene blue solution,diluted by phosphate buffer solution(pH 6.8),the detective wave length was 665 nm.Results:The method was sepci…

Fluoride Effects and RemovalDiatoms and Algae ResearchGrouting, Rheology, and Soil Mechanics

Catalytic exchange performance of hydrogen-deuterium and methane on Ni-Rh/Al_2O_3 catalyst

Liangping Xiong2009-01-01OpenAlex

The catalytic properties of the Ni-Rh/Al2O3 catalysts for the hydrogen-deuterium exchange of methane were tested with the fixed-bed micro-reactor.The results indicated that the conversion of methane increased by increasing reaction temperature when the temperature was less than 692K,the conversion of methane is not ch…

Catalytic Processes in Materials ScienceCatalysts for Methane ReformingCatalysis and Oxidation Reactions

Control Measurement of Nitrogen Deformation for Machinery Parts

Haiyun Zhang2009-01-01Rejiagong gongyi

The mechanism of nitrogen deformation for the machinery parts (workpiece) was discussed. All kinds of influencing facts and the ordinary rules of the nitrogen deformation were analyzed. Through the experimental research, the measurement controlling the deformation is put forward.

Metal Alloys Wear and PropertiesIndustrial Technology and Control Systems

Study on rheological property of cellulose/ionic liquids

Hongqin Yan2009-01-01OpenAlex

Cellulose/[BMIM] Cl solution with different cellulose concentrations was prepared by using the ionic liquid 1-butyl-3-methylimidazolium chloridedispersion [BMIM]Cl as the solvent.The steady rheological properties of the solution were investigated by means of ARES-RFS rheometer.The influence of several factors includin…

Advanced Cellulose Research StudiesLignin and Wood ChemistryMaterial Properties and Processing

Test on fibre content of textile mixture materials with IR method

Liu Li2009-01-01Laser & Infrared

In the article,we do attenuation whole reflection to cotton and terylene mixed textile materials by use of FTIR,adopt stepwisemultiple linear regression to choose characteristic wavenumber 1000~1400 cm-1,spectrum datas are disposed by center change and differential coefficient methods in advance.Math modle is built,th…

Dyeing and Modifying Textile FibersTextile materials and evaluations

Study on the influence factors on the whiteness of modified tapioca starches

Zhang Tao2009-01-01Food Science and Technology International

High pH is usually used in the production of modified starch by the wet method.The influences of the reaction pH and temperature on the whiteness of modified starches were investigated.The experiment showed that the reaction pH has dramatic effect on the whiteness of modified tapioca starches with higher pH companied…

Food composition and propertiesNanocomposite Films for Food PackagingFreezing and Crystallization Processes

Diffraction characteristics analysis of double rectangular gratings

Hou Ruining2009-01-01Optical Instruments

The double diffraction grating system's diffraction-interference effect is important,In this article,two random diffraction screens are placed in front of the len first,the light intensity distribution in the len's back focal plane can expressed by the correlation of the amplitude transmittance function of the two dif…

Photonic and Optical DevicesOptical Coatings and GratingsOptical Systems and Laser Technology

Breeding of a New Silkworm Variety "Qiantang×Xinchao" for Summer-Autumn Rearing

Cao Jin2009-01-01Canye kexue

Aiming at the silkworm breeding objective of strong vitality and stable yield,a new silkworm variety named Qiantang×Xinchao for summer-autumn rearing was bred with the method of hybridization followed by directive breeding and strict selection in specific high temperature and humid environment.The results of laborator…

Silk-based biomaterials and applicationsResearch in Cotton CultivationSilkworms and Sericulture Research

Bifurcation analysis of kink bands of bi-slippage crystal metamorphic rock under plane strain

Lan Zhang2009-01-01OpenAlex

Kink band of metamorphic rock is an important geologic tectonic trace resulted from the crystal slip under the constructional stress fields. To study its formation mechanism and construction parameters is very important for exploration of tectonic movements of the earth crust. Due to the larger deformation in kinking…

Rock Mechanics and ModelingHigh-Velocity Impact and Material BehaviorGeotechnical and Geomechanical Engineering

Synthesis and Characterization of ZSM-5/Nano-β Core-Shell Composite-Zeolites

Tong Wei2009-01-01OpenAlex

ZSM-5/nano-β core-shell composite-zeolites were hydrothermally synthesized by a secondary growth on core ZSM-5 with a uniform size of 1 μm,which was pre-adsorbed with nano-β seeds after pretreated with positive PDDA(poly dimethyldiallylammonium chloride),and then was calcined in air.The obtained products were characte…

Zeolite Catalysis and SynthesisMesoporous Materials and CatalysisCatalysis and Hydrodesulfurization Studies

Thermal Decomposition Kinetics of 2,6-Diamino-3,5-dinitropyridine 1-oxide and Its Formulation Explosives

Zuliang Liu2009-01-01Chinese Journal of Explosives and Propellants

The thermal decomposition processes of 2,6-diamino-3,5-dinitropyridine-1-oxide(ANPyO) explosive and its polymer bonded explosives were studied by TG at heating rates of 2.5,5,10,20 K·min-1,respectively.The thermal decomposition kinetic parameters and the mechanism functions of ANPyO explosive and its polymer bonded ex…

Energetic Materials and CombustionThermal and Kinetic Analysis

Study on sealing planar SOFC

Bin Xie2009-01-01OpenAlex

A novel composite brazing of Ag-8CuO+2YSZ was used in air to seal anode-supported planar solid oxide fuel cell (SOFC) so as to prevent leakage. The effects of YSZ ((Y2O3)0.08(ZrO2)0.92) addition on the microstructure of Ag-CuO solders joint were investigated,and the open-circuit potential (OCP) of a single cell as a f…

Catalytic Processes in Materials ScienceAdvancements in Solid Oxide Fuel CellsHigh-Temperature Coating Behaviors

Current State and Progress of Heart Valve Tissue Engineering

Di Zhang2009-01-01Advances in Cardiovascular Diseases

The currently used heart valve prostheses,either mechanical cardiac valve or bioprosthetic valve,have their own defects both in anticoagulation and longevity.With the development of tissue engineering techniques,the tissue engineered heart valves are thought to have many advantages in low immunogenicity,durability,and…

Cardiac Valve Diseases and TreatmentsElectrospun Nanofibers in Biomedical ApplicationsTissue Engineering and Regenerative Medicine