Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Nanostructures of wurtzite‐structured zinc sulfide , which is unlikely to be stable at room temperature under conventional conditions, have been synthesized by a simple physical process. Morphologies with belt‐ (see Figure), saw‐, comb‐, and windmill‐like nanostructures have been observed and characterized using a var…
Abstract A nonwettable polypropylene (PP) surface was modified by an ion‐assisted reaction (IAR) to improve its adhesion with a conjugated polymer, polyaniline (PAN). Hydrogen ions with energies ranging from 0.6 to 1 keV were irradiated on the PP surface in an oxygen gas environment. Ion doses were in the range 5 × 10…
Abstract Infrared spectra of polyamide‐6 (PA6) with and without epoxidized natural rubber (ENR) are presented. The influence of ENR used as a compatibilizer on the morphologies, crystallizability, mechanical properties, and thermal behavior of the polyamide‐6/polyolefins (PO) blends are studied. The infrared spectra s…
Abstract Biodegradable plastics (GSD) based on soy dreg (SD) were prepared by compression‐molding, with glycerol as the plasticizer and glutaraldehyde (GA) as the cross‐linker. The structure and properties of the GSD sheets were investigated by Fourier‐transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD), d…
Ultrafast energy exchanges of a non-Fermi electron gas with the lattice are investigated in silver clusters with sizes ranging from 4 to 26 nm using a femtosecond pump-probe technique. The results yield evidence for a cluster-size-dependent slowing down of the short-time energy losses of the electron gas when it is st…
Abstract New cyclic oligomers of the copolymer of poly(ethylene terephthalate) (PET) and poly(ethylene isophthalate) (PEI) were isolated and identified. A condensation polymerization was carried out at a high temperature, and the solid‐state polymerization that followed yielded the high molecular weight polymer. The o…
Triply bridged bis-iminodioxolene dinuclear metal complexes of general formula M(2)(diox-diox)(3), with M = Co, Fe, have been synthesized using the bis-bidentate ligand N,N'-bis(3,5-di-tert-butyl-2-hydroxyphenyl)-1,3-phenylenediamine. These complexes were characterized by means of X-ray, HF-EPR, and magnetic measureme…
Abstract A series of methacrylate‐based chelating polymers was synthesized by the reaction of 3‐hydroxy‐4‐acetylphenyl methacrylate with amines (e.g., ethylenediamine, propylenediamine, and phenylenediamine) in tetrahydrofuran. The chelating polymers were characterized by infrared (IR) and carbon‐13 nuclear magnetic r…
Abstract Gelatin/montmorillonite (MMT) hybrid nanocomposites with improved thermal and mechanical properties were prepared in a previous work. The swelling behavior (swelling rate, swelling kinetics, maximum solvent uptake, etc.) of the obtained composites was investigated. The results showed that the swelling process…
Abstract Composites based entirely on renewable materials with flax fibers as reinforcement and cellulose acetate butyrate (CAB) as the matrix were prepared by compression molding. Scanning electron microscopy of the fracture surfaces showed insufficient penetration of the matrix into the fiber mat. Rheological measur…
Abstract The mechanical, thermal, rheological, and morphological properties of polypropylene (PP)/polystyrene (PS) blends compatibilized with styrene–isoprene–styrene (SIS), styrene–butadiene–styrene (SBS), and styrene–butadiene–rubber (SBR) were studied. The incompatible PP and PS phases were effectively dispersed by…
Abstract The structural characterization of polyesters of citric acid (CA) with ethylene glycol and long‐chain aliphatic alcohols (ROH), prepared by the composition of the reaction mixture being adjusted slightly away from stoichiometric equivalence, was performed with 1 H‐ and 13 C‐NMR spectroscopy. The aliphatic alc…
ADVERTISEMENT RETURN TO ISSUEPREVNoteNEXTSynthesis of a Stable Helical Peptide and Grafting on Gold NanoparticlesPaolo Pengo, Quirinus B. Broxterman, Bernard Kaptein, Lucia Pasquato, and Paolo ScriminView Author Information CNR-ITM Sezione di Padova and Università di Padova, Dipartimento di Chimica Organica, via Marzo…
The low-temperature specific heat $C(T,H)$ of the superconductor ${\mathrm{MgCNi}}_{3}$ has been measured in detail. $\ensuremath{\Delta}C/{\ensuremath{\gamma}}_{n}{T}_{c}=1.97$ is estimated from the anomaly at ${T}_{c}.$ At low temperatures, the electronic contribution in the superconducting state follows ${C}_{\math…
Overview of the automotive plastics market, Susan J. Babinec and Martin C. Cornell plastics processing, Steven D. Stretch formulating plastics for paint adhesion, Dominic A. Berta polymers for coatings for plastics, J. David Nordstrom performance and durability testing, Philip V. Yaneff painting problems, Clifford K.…
Abstract The effects of an organic phosphorus nucleating agent on the crystallization behavior and mechanical properties of poly(propylene) were investigated. As the concentration of nucleating agent increased from 0 to 0.8%, the tensile and flexural strengths of the nucleated poly(propylene) resin increased by 15%, t…
Zinc oxide nanoparticles coated with zinc aluminate have been prepared by performing Al2O3 precipitation on the precursor basic carbonate of zinc (BCZ) of zinc oxide. TEM shows that a homogeneous layer is formed on the surface of the zinc oxide nanoparticles, and the coated particle size is about 50–60 nm. The thickne…
Two molecule-based magnets, [Mn(2)(tea)Mo(CN)(7)].H(2)O, 1, and [Mn(2)(tea)Mo(CN)(7)], 2 (tea stands for triethanolamine), formed with the 4d ion building block, [Mo(CN)(7)](4)(-), Mn(II) ions, and an additional ligand, tea, have been prepared and structurally characterized by single-crystal X-ray analyses. Whereas 1…
Miscible blends of perdeuteriopoly(ethylene oxide) (d 4 PEO) and poly(methyl methacrylate) (PMMA) were studied using deuterium NMR over the concentration range of 0.5−30% d 4 PEO using 2−4 Larmor frequencies ranging from 31 to 76 MHz. Spin−lattice relaxation times and line widths were measured from 300 to 475 K. Over…
Abstract The interfacial adhesion between a wood fiber and a plastic matrix strongly influences the performance of wood‐fiber‐reinforced thermoplastic composites. Fiber surface modification with coupling agents is generally needed to induce bond formation between the fiber and polymer matrix. This study investigated t…