Materials Literature

文献浏览

按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。

清除
第 294742 / 314044 页 · 当前展示 5,894,821–5,894,840 / 6,280,861 条匹配结果 · 摘要仅作预览

Effect of cooling water and iron scale on roll wear

LU Ming-zheng2009-01-01Wisco Technology

The present paper pointed out the importance of roll as the large scale tool in reducing the cost in steel rolling of the rolling mill and briefly analyzed the mechanical principle of the heat stress roll breakage and pointed that this phenomenon occurred in the production in the Mill and pointed out the effect of the…

Microstructure and Mechanical Properties of SteelsMetallurgy and Material FormingMetal Alloys Wear and Properties

Preparation and Properties of La_(1-x)Ca_xCo_(0.8)Ni_(0.2)O_3 Oxide by Sol-freezing Drying Method

Ren Shu-lin2009-01-01Chinese Rare Earths

La1-xCaxCo0.8Ni0.2O3(x=0.1~0.5)catalysts were synthesized by sol-freezing drying method.The crystal structure,surface area and micrograph of the catalysts were analyzed using XRD,BET and SEM,respectively.The results indicate that single-phased perovskite-type La1-xCaxCo0.8Ni0.2O3 oxides can be achieved when the precur…

Catalytic Processes in Materials ScienceAdvancements in Solid Oxide Fuel CellsCatalysis and Oxidation Reactions

The Development of Surface Treatment on Titanium Alloy for Warship

Zhang Yi-bin2009-01-01Development and Application of Materials

Titanium and its alloys are widely used in warship building due to their low density,high specific strength,stable performance at moderate temperatures,and superior corrosion resistance etc,but the use of titanium alloys is limited for its low hardness,poor wear-resistance and poor oxidation-resistanceat at high tempe…

Titanium Alloys Microstructure and Properties

Preparation and Cell Morphology of Fine-Celled Wood Fiber-Plastic Composites Foams

Huagn Han-xiong2009-01-01Gōsei jushi

Microcellular wood fiber-plastic composites(WPC) foams were prepared by a single-screw foaming extruder with supercritical fluid injection.The average cell sizes of WPC foams were below 50 μm,and the cell density was above 106 cells/cm3.For WPC foams,when increasing wood fiber content,average cell size decreased,cell…

Cellular and Composite StructuresLignin and Wood ChemistryPolymer Foaming and Composites

Adsorption of Cellulose Xanthate to Ni~(2+) Ions in Water

Peng Wang-ming2009-01-01Journal of Jianghan University

The application of cotton cellulose xanthate was obtained by the reaction of cotton with NaOH and CS2. By using cotton cellulose xanthate as adsorbent,some factors which influenced the adsorption of nickel ions in wastewater were studied including adsorption temperature,adsorption time,solution pH value,amount of adso…

Adsorption and biosorption for pollutant removalAdvanced Cellulose Research StudiesPhosphorus and nutrient management

DEVELOPMENT OF CHEMICAL MODIFICATION FOR CARBON NANOTUBES

Yusheng Tang2009-01-01Carbon Techniques

Carbon nanotubes were one of nanomaterials with unique structure and significant advantages. Polymer nanocomposites filled with carbon nanotubes have attracted considerable attention by scientists in recent years. In this paper, the research and development of the chemical modification for carbon nanotube are summariz…

Carbon Nanotubes in Composites

Functionalized dendritic oligothiophenes - applications in organic solar cells

Markus Fischer2009-01-01OPen Access Repositorium der Universität Ulm (OPARU) (Ulm University)

Dendrimers are three-dimensional repeatedly branched molecules and represent a relatively young class of macromolecules. Next to flexible dendrimers it is also possible to synthesize semirigid conjugated dendrimers by connecting exclusively pi-conjugated subunits. These molecules are characterized by their structure p…

TiO2 Photocatalysis and Solar CellsOrganic Electronics and PhotovoltaicsConducting polymers and applications

Surface Hardening Techniques of P/M Titanium Alloys

F. Chen2009-01-01Cailiao daobao

Low hardness and poor wear resistance constrain the practical applications of titanium alloys,especially for those made by P/M.Surface hardening technique is one of the effective means to enhance the surface properties of P/M Ti alloys.Several typical surface hardening techniques for improving surface hardness and abr…

Metal and Thin Film MechanicsHigh Entropy Alloys StudiesTitanium Alloys Microstructure and Properties

THE FRICTION-REDUCING AND ANTI-WEAR PROPERTIES OF α-LAYERED SODIUM DISILICATE AS LUBRICATING ADDITIVE

Yang Xiao、Huafeng Li、Bin Chen 等 4 位作者2009-01-01Acta Petrolei Sinica(Petroleum Processing Section)

α-Layered sodium disilicate possessed the similar layer structure to the reported solid lubricants(graphite,etc).Based on the foregoing study that δ-Na2Si2O5 had good tribological performance,the oil acid(OA) surface-capped α-Na2Si2O5 particles were synthesized in an anhydrous medium in several base oils and liquid pa…

Diamond and Carbon-based Materials ResearchLubricants and Their AdditivesTribology and Wear Analysis

Process and Action Mechanism of Sonochemical Surface Treatment of PBO Fibers

Jianxin Xie2009-01-01Gaofenzi cailiao kexue yu gongcheng

The process and action mechanism of surface treatment of p-phenylene-2,6-benzobisoxazole (PBO) fibers had been investigated under the conditions of ultrasonic wave and the mixed solution of polyphosphoric acid (PPA) and ethanol. The surface morphology,tensile property and interfacial adhesion between fiber and resins…

Conducting polymers and applicationsElectrospun Nanofibers in Biomedical ApplicationsFiber-reinforced polymer composites

Discussing regarding 3105 aluminium alloy popularized in aluminum strip industry

Chen Guo-sheng2009-01-01Light Alloy Fabrication Technology

Through analyzing characteristic of sheet and strip of 3105 aluminium alloy,brief introducing for the applied status of aluminum alloy in industry of aluminum sheet and strip,short introducing and analysis for processing flow of 3105 alloy strip,it has a positive and practical significance to popularize 3105 alloy in…

Metallurgy and Material FormingMetallurgy and Material Science

Study on the affacting factors of dynamic mechanical property of CIIR damping material

Sun Zhi-yong2009-01-01OpenAlex

The effects of tackifying resin style、high abrasion furnace black content、testing frequency to dynamic mechanical properties were studied by DMA 242. The results showed that tackifying resin had significant effect on the dynamic mechanical property,the material has the biggest peak of tgδ and the highest peak temperat…

Advanced ceramic materials synthesisAdvanced Surface Polishing TechniquesSilicone and Siloxane Chemistry

Performance Investigation of H_2S/air Solid Oxide Fuel Cell

Huang Jian-guang2009-01-01Journal of Shunde Polytechnic

Yttria-stabilized zirconia(YSZ) oxygen ion-conducting membrane and electrode catalysts were prepared by ceramic-membrane-making and sol-gel technique.The membrane-electrode assembly(MEA) and cell system consisting of H2S,(composite MoS2 anode)/ YSZ membrane/(composite NiO cathode)as well as air were built up.Binary me…

Electrocatalysts for Energy ConversionAdvancements in Solid Oxide Fuel CellsFuel Cells and Related Materials

Effects of power supply on barrier properties of SiO_x thin film

Zhuang Liu2009-01-01Journal of Harbin University of Commerce

Researching on the barrier properties of SiOx thin film produced under different power conditions,and gets the relationship curve between electrical power and barrier properties of the films.And the outcome shows that the relationship between power supply and barrier properties is non-linear,and the SiOx thin film bar…

Thin-Film Transistor TechnologiesSilicon Nanostructures and Photoluminescence

Effect of Microdefects on Tensile Properties of High Volume Fraction SiC_p/Al Composites

Cui Yan2009-01-01Hangkong cailiao xuebao

The finite element models of high volume fraction SiCP/Al composites with microdefects were established.And the tensile mechanical properties of these composites were calculated.Through numerical simulation of typical microdefects as voids and interface debondings,it was found that the voids have a little effect on th…

Advanced ceramic materials synthesisAluminum Alloys Composites PropertiesAdvanced materials and composites

Simultaneous Determination of Co,Nb,Fe and B in Ni-Mn-Co-Si-Fe-Nb-B Alloy by ICP-AES

Li Guang2009-01-01Chinese Journal of Spectroscopy Laboratory

The optimal experiment conditions for the simultaneous determination of Co,Nb,Fe,B in Ni-Mn-Co-Si-Fe-Nb-B alloy steel by whole-spectrum ICP-AES were studied.The experiment factors including the method for dissolving sample,spectra of analyzed element,interfence of coexisting elements,the background correction and inst…

Microstructure and Mechanical Properties of SteelsMetal Alloys Wear and PropertiesAdvanced Materials Characterization Techniques

The Performance-enhancing Effect of the Elastomer SBS Modified by Nano-SiO_2 Grafted by Monooctadecyl Maleate

Zhang Yong-hua2009-01-01Synthetic Materials Aging and Application

The nano-SiO2 had been treated by as-phase treatment using the coupling agent KH570,monooctadecyl maleate and styrene.The modified SiO2 were characterized by Fourier Infared spectra(FT-IR) and Thermogravimetric analysis(TGA).In order to obtain the best SBS modification ratio,the mechanical properties of the SBS modifi…

Polymer Nanocomposites and PropertiesConducting polymers and applicationsDendrimers and Hyperbranched Polymers

Aromatizing reaction of ethanol without oxygen over Pt/CeO_2 catalyst

Jinglin Li2009-01-01Journal of Guangxi University

The aromatizing reaction of ethanol without oxygen on Pt/CeO2 catalyst was studied,the effects of Pt content,weight hourly space velocity,and reaction temperature on the aromatization of ethanol were investigated.The reaction mechanism was discussed.The activity was good when Pt content was 1%,weight hourly space velo…

Catalytic Processes in Materials ScienceZeolite Catalysis and SynthesisIndustrial Technology and Control Systems

Mesh Variables Mapping Algorithm Used in Car Crash Simulation and Its Verification

Yu Liang2009-01-01OpenAlex

In car crash simulation,the effects of thickness change,hardening and residual stress occurring during the forming process of sheet metal part on the car crash simulation results should be considered.The mesh model transferred directly from the forming equipment is usually not suitable to simulate the car crash due to…

High-Velocity Impact and Material BehaviorSoil Mechanics and Vehicle DynamicsTransportation Safety and Impact Analysis

Study on compatibility of pyridyl-functionalized SBS and various tackifiers

Mingwei Di2009-01-01Adhesion in China

The compatibility of pyridyl-functionalized styrene butadiene block copolymers(SBS) and various tackifiers was studied using dynamic mechanical analysis(DMA) in this paper.The results showed that,after blending of the pyridyl-functionalized SBS with different tackifiers,the glass-transition temperature(T g) of the ble…

Polymer crystallization and propertiesPolymer Nanocomposites and PropertiesSynthesis and properties of polymers