Materials Literature
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Abstract Onium ion‐modified montmorillonite (organoclay) was melt compounded with natural rubber (NR) in an internal mixer and cured by using a conventional sulfuric system. Epoxidized natural rubber with 50 mol % epoxidation (ENR 50) was used in 10 parts per hundred rubber (phr) as a compatibilizer. The effect of org…
Can we predict diffusion behavior of molecules in confinement by looking at the match between the molecule and the structure of the confinement? This question has proven difficult to answer for many decades. As a case study, we use methane and a simple model of ellipsoids to arrive at a molecular picture that allows u…
Phosphorus-doped p-type ZnO films were grown on r-plane sapphire substrates using molecular-beam epitaxy with a solid-source GaP effusion cell. X-ray diffraction spectra and reflection high-energy electron diffraction patterns indicate that high-quality single crystalline (112¯0) ZnO films were obtained. Hall and resi…
The effects of Mg addition on the emission of green photons from ZnO nanoparticles were studied. Energy dispersive x-ray spectroscopy (EDS) and Auger electron spectroscopy (AES) data demonstrated that ZnO nanoparticles with surface segregation of MgO (ZnO:MgO) were precipitated from colloidal reactions between Zn(2+),…
Monodispersed, highly crystalline dendrimer-stabilized gold nanoparticles (Au DSNPs) were synthesized via hydrazine reduction chemistry and stabilized using primary amine-terminated poly(amidoamine) (PAMAM) dendrimers of different generations (generations 2–6) with the same molar ratios of dendrimer terminal nitrogen…
ZnO nanorods with various diameters were synthesized on both sapphire and silicon substrates by a pulsed-laser-deposition technique without a catalyst using relatively high background oxygen pressure (5–20 Torr) and substrate temperature (550 °C-700 °C). The photoluminescence (PL) properties of the nanorods were inves…
Our study shows that the H2 storage media using Ni-dispersed fullerenes could be viable alternatives to reversible hydrogen storage. It is demonstrated that a single Ni coated on the fullerene surface can store up to three H2 molecules. Consequently, at high Ni coverage, Ni-dispersed fullerenes are considered to be th…
The results of Point Contact Andreev Reflection Spectroscopy on polycrystalline RuSr$_2$GdCu$_2$O$_8$ pellets are presented. The wide variety of the measured spectra are all explained in terms of a modified BTK model considering a \emph{d-wave} symmetry of the superconducting order parameter. Remarkably low values of…
Using density-functional-based method, we study the k-resolved sigma- and pi-band holes in Mg_{1-x}Al_{x}B_{2} and Mg(B_{1-y}C_{y})_{2} alloys. We find that the calculated profiles of the loss of sigma- and pi-band holes in these two systems as a function of impurity concentration are in qualitative agreement with exp…
We propose a combination of atomic force microscopy (AFM) and optical microscopy for the investigation of particle uptake by cells. Positively and negatively charged polymer microcapsules were chosen as model particles, because their interaction with cells had already been investigated in detail. AFM measurements allo…
Ferrites with the general formula Li 0.5 Ni 0.75− x /2 Cd x /2 Fe 2 O 4 (where x = 0, 0.1, 0.3, 0.5, 0.7 and 0.9) were prepared by the standard double sintering ceramic method. X-ray diffraction analysis confirmed the single phase spinel structure of the samples. The variation of saturation magnetization ( M s ) was s…
Getting on the tube: A single-step method to attach silver nanoparticles on the surfaces of nitrogen-doped multi-walled carbon nanotubes is described (as depicted in the picture). Ag nanoparticles (2–10 nm diameter) are synthesized by reduction of a Ag salt, and then mixed with the nanotubes in a technique that does n…
Variable liquid crystal pretilt angles of any value from 0 to 90° can be obtained by using a nanostructured alignment layer. This layer is robust and reliable. The pretilt angles obtained are stable against high storage and operating temperatures, and have strong anchoring energies.
Magnetic moments in atomic scale domain walls formed in nanoconstrictions and nanowires are softened which affects dramatically the domain wall resistance. We perform ab initio calculations of the electronic structure and conductance of atomic-size Ni nanowires with domain walls only a few atomic lattice constants wid…
Careful first-principles density functional calculations reveal the importance of hexagonal versus cubic stacking of closed packed planes of Pd as far as local magnetic properties are concerned. We find that, contrary to the stable face centered cubic phase, which is paramagnetic, the hexagonal close-packed phase of P…
Iron self-diffusion in nano-composite FeZr alloy has been investigated using neutron reflectometry technique as a function of applied compressive stress. A composite target of (Fe+Zr) and (57Fe+Zr) was alternatively sputtered to deposit chemically homogeneous multilayer (CHM) structure, [Fe75Zr25/57Fe75Zr25]10. The mu…
The magnetization kinetics in (Zn,Mn)Se/(Zn,Be)Se quantum wells has been studied on a ps-time scale after pulsed laser excitation. The magnetization induced by an external magnetic field is reduced by up to 30% during ~100 ps due to spin and energy transfer from photocarriers to Mn spin system. The giant Zeeman splitt…
We report a new in-situ reactive deposition thin film growth technique for the production of MgB2 thin films which offers several advantages over all existing methods and is the first deposition method to enable the production of high-quality MgB2 films for real-world applications. We have used this growth method, whi…
Using low-temperature scanning laser microscopy we directly image electric transport in a magnetoresistive element, a manganite thin film intersected by a grain boundary (GB). Imaging at variable temperature allows reconstruction and comparison of the local resistance versus temperature for both the manganite film and…
Abstract Different polymorphs of the same active pharmaceutical ingredient (API) display distinct physical properties, such as melting point, solubility, dissolution rate, hygroscopicity, or stability. The ability to successfully produce and reproduce specific stable polymorphs is intricately correlated with the effic…