Pressure-volume-temperature relations in liquid and solid tritium
He growth during an experiment were adequate except near the triple point.
Materials Literature
文献浏览
按标题、摘要、年份、主题和来源检索公开元数据。结果保留作者、摘要、分类与原始来源链接。
Characterization of thermoplastic poly(ethyleneterephthalate)‐glass fibre composites, 1. Crystallization study
Abstract This paper presents the influence of glass fibres on crystallization kinetics and on matrix morphology for poly(ethylene terephthalate) (PET)/glass fibre composites. The following parameters are also considered: fusion‐crystallization conditions, thermal stability and the addition of nucleating agents in the…
Selecting the components of composites
Composites combine the properties of two or more components. Conceptual tools are developed which guide the selection of components for making composites which maximise one or more aspect of thermo-mechanical performance.
Friction and the Dynamic Mechanical and Thermal Properties of Polyurethane Elastomers. 1. Solid Polyurethanes
The results reported indicate that the properties of polyurethanes elastomers can be tailored to serve a wide variety of applications, for low temperature uses as well. The glass transition temperatures of the soft segments (T gs ) which control the low temperature properties of polyurethane elastomers, ranged from -7…
Laser-induced temperature distribution in substrates with periodic multilayer structures
A general model and analytical results have been derived to obtain laser-induced temperature rise in substrates with periodic multilayer structures. The substrate can be equivalent to a homogeneous substrate with anisotropic thermal conductivity, if the dimension of the periodic structure is much smaller than the lase…
Auger electron spectroscopy (AES) study on fractured rapidly-quenched and sintered NdFeB magnets
By using Auger electron spectroscopy (AES) to obtain chemical information from the fractured surfaces of rapidly quenched and sintered NdFeB magnets, it is found that the Nd-rich phases in the grain boundaries are different in these two kinds of magnets. In rapidly quenched NdFeB magnets, the Nd-rich phase is mainly N…
Effect of transition/rare earth metal oxide additives on densification during sintering of Si3N4
It is argued that the sintering and densification of Si3N4 based ceramics, using transition metal or rare earth metal oxide additives, can be described as an electronic mechanism involving a transfer of electrons into the Si3N4–SiO2 valence band: this is consistent with a recently proposed model of bonding at metal/ce…
Enhancement of the Magnetic Properties of Sm-Fe and Nd-Fe-N Alloys with ThMn12 Structure by Utilizing HDDR Phenomena
The effects of HDDR (hydrogenation decomposition desorption recombination) phenomena on the magnetic properties of SmFe11Ti, SmFe10MM', NdFe11Ti, and Nd1+δFe10MM' (δ=0, 0.3, M=Ti, V, Mo, M'=V, Mo) compounds with a ThMn12-type structure were investigated. Alloy powders of SmFe10V2, SmFe10TiV, and NdFe10MM' (M=Ti, V, Mo…
Silicon carbonitrides - A novel class of materials
Silicon carbonitride monoliths derived from polymer powder compacts via polymer pyrolysis represent a new class of structural ceramic materials due to the complete coalescence of the powder particles during polymer decomposition and the formation of a uniform ceramic matrix free from any grain boundaries or secondary…
Simultaneous NOx–SOx removal by ammonia using methanol injection and partial flue gas condensation
Abstract The feasibility of combining selective reduction of nitric oxide by ammonia, or nitric oxide oxidation by methanol, with partial flue gas condensation has been studied in the laboratory. It was demonstrated that both combinations may result in high removal efficiencies for nitric oxide and sulfur dioxide. Hig…
Complexation of poly(ethylene glycol) with some salts of alkali‐earth metals
Abstract The interaction of poly(ethylene glycol) with some salts of alkali‐earth metals (Mg(ClO 4 ) 2 , BaCl 2 , SrCl 2 , SrBr 2 and CaCl 2 ) in methanolic solutions was investigated by electroconductivity, viscometry, X‐ray diffractometry and NMR. It was established that the conformation of macromolecules is strongl…
Thermodynamic Properties of Gaseous Silicon Monotelluride and the Bond Dissociation Enthalpy D°m(SiTe) at T→0
Statistical-thermodynamic calculations have been combined with the results of high-temperature Knudsen-effusion studies of the vaporization of Si2Te3 to calculate the thermodynamic properties of SiTe(g) from T→0 to T=2000 K. The dissociation enthalpy D○m(SiTe, T→0) is (448±8) kJ⋅mol−1; its value is discussed vis-a-vis…
Synthesis and Aggregate Morphology of Protoporphyrin IX Derivative Having Phospholipid Residue
Abstract A protoporphyrin IX derivative having a phospholipid residue (lipid-porphyrin) was synthesized. The lipid-porphyrin itself formed an oval multilamellar vesicle in an aqueous medium. The spectral features of the lipid-porphyrin vesicle indicated a stacked configuration of the porphyrin moiety.
The crystal structure of wolframite type tungstates at high pressure
Article The crystal structure of wolframite type tungstates at high pressure was published on November 1, 1993 in the journal Zeitschrift für Kristallographie - Crystalline Materials (volume 207, issue 1-2).
MORPHOLOGY AND TAXONOMY OFCHAETOCEROS DIVERSUS(BACILLARIOPHYCEAE) BASED ON MATERIAL FROM THE SOUTHERN GULF OF MEXICO
Analysis of net and bottle samples from the southern Gulf of Mexico allowed documentation of the morphological variation exhibited by 201 chains of the planktonic diatom Chaetoceros diversus Cleve. Considerable variation existed in the length (i.e. number of cells) and curvature of chains, dimensions of individual cel…
Texture and microstructure of high purity tantalum
The texture and microstructure of rolled and annealed pure Ta was investigated by means of quantitative texture analysis and metallography. The rolling textures were discussed using simulations according to Relaxed Constraints Taylor Theory. The annealed samples revealed recovery and continuous recrystallization for w…
Structure and electrical conductivity of ion‐implanted rigid‐rod and ladder polymers
Abstract Isotropic and oriented thin films of rigid‐rod, rigid‐rod pseudo‐ladder, and ladder polymers were ion‐bombarded with 84 Kr + to a dose of 4 × 10 16 ions/cm 2 . The bombardment was conducted at two conditions: one at 190 keV energy with 0.12 μA/cm 2 current density and the other at 200 keV energy with 2.0 μA/c…
Magnetic properties and stability of melt spun Nd/sub 5/Fe/sub 17/
Nd/sub 5/Fe/sub 17/ (also referred to as A/sub 2/-phase) is prepared by rapid-quenching and subsequent annealing. Due to the fine, homogeneous distribution of the elements in the melt-spun ribbons, only a short reaction time is required in the annealing treatment. The samples are almost single-phase, as revealed by X-…
STUDIES ON THE GENERAGYROSIGMAANDPLEUROSIGMA(BACILLARIOPHYCEAE) THE IDENTITY OFPLEUROSIGMA OBSCURUMW. SMITH
The typification of Pleurosigma obscurum W. Smith is discussed with reference to material collected by W. Smith. The placing of the species in the genus Gyrosigma in recent publications is incorrect. All intact cells of this organism were collected in non-marine samples. Claims in the literature for a marine-brackish…
Depth Profile Measurement of Activated Boron-Concentration in Diamond Thin Films Utilizing Schottky Diode C-V Curves
The depth profiles of activated boron concentration N B in the Al/p + -diamond Schottky diodes were systematically investigated from the junction capacitance-voltage ( C - V ) curves. The observed 1/ C 2 vs V plot did not fall on straight lines, indicating a nonuniform depth profile of N B . Using these C - V curves,…